Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Regarding my local c drive.

14 Apr 2011   #1

Windows 7 Home Premium 64bit
Regarding my local c drive.

Well my emachine:C(or c drive) has 280gb, is there anyway to split this into 2 parts with 140gb on each?

My System SpecsSystem Spec
14 Apr 2011   #2

Windows 7 Home Premium 64bit

My System SpecsSystem Spec
14 Apr 2011   #3

Windows 7 Home Premium 64bit

thanks is there any better one?
My System SpecsSystem Spec

14 Apr 2011   #4

Microsoft Community Contributor Award Recipient

Win 7 Pro x64 / Win 10 Pro

Have a look at this it's a free partition manager and in the screenshot I took there are links highlighted in the red that will give you step-by-step instructions. If you have an external hard drive I would backup your data first or do a system image to the external hard drive.
Best Free Partition Manager Freeware for Windows 7, Windows Vista, and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.

Attached Images
Regarding my local c drive.-region.png 
My System SpecsSystem Spec
14 Apr 2011   #5
Microsoft MVP


The standard method:
Partition or Volume - Shrink
Partition or Volume - Create New

However there may be complications involved so best to post back a screenshot of your maximized full Disk mgmt drive map with listings so we can give you the best tool with the exact steps: Screen Shots
My System SpecsSystem Spec
14 Apr 2011   #6

Windows 7 Ultimate x64 SP1

Always ALWAYS back up your data first...just in case.
My System SpecsSystem Spec
14 Apr 2011   #7

Windows 7 Pro x64 (1), Win7 Pro X64 (2)

Quote   Quote: Originally Posted by GradeAbra View Post
Well my emachine:C(or c drive) has 280gb, is there anyway to split this into 2 parts with 140gb on each?
I'd suggest you download and install Paritition Wizard (free) Home Edition v5.2 along with its standalone boot CD which you can burn by downloading this ISO file. The program itself runs under Win7, so you can see drive letters.

The standalone boot CD is for emergencies, disaster/recovery, and for partition-related operations that cannot be performed while the Win7 operating system is active but must be run while standalone booted.

In the case of wanting to subdivide your one-and-only hard drive which today contains a one-and-only C-drive into more than one partition, you first have to shrink C. This frees up space at the high-end of the drive. C is what's referred to as "primary" partition type, but that's just a technical description for HOW it is allocated.

A standard hard drive can support up to four PRIMARY partitions. In a one-OS environment, one of those four allowed primary partitions is the 100MB "system reserved" partition which contains the Win7 boot manager files. Then the second primary partition (which in your case takes the entire rest of the drive) is typically C, and C only.

So by freeing up free space from a shrunken C, we now have the option of allocating additional primary partition(s) in the newly available free space, but if you choose "primary" partition type there is that maximum limit of FOUR total primary partitions on the drive to contend with.

More recommended, for its flexibility and lack of limitation, is to use that newly available free space to create one or more "logical" partitions (as opposed to "primary" partitions). You can have any number of "logical" partitions in that free space... you're not limited to a total of four on the drive, as would be the case if these new parititions were of the "primary" type.

Anyway, when you install Partition Wizard and run it under Win7 you specify an operation for it to perform which is to "resize" the C partition. This cannot be done while Win7 is actually booted, so it will tell you that you need to close the program and restart... and then Partition Wizard will kick in at boot time (before Win7 gets booted) when the shrinking of C will now occur. Alternatively, you can boot to the standalone PW CD and do the operation right then and there... since you're not running under Win7.

Anyway, once C is resized via either of the two above methods, Win7 is then booted... and you now have this freespace at the high end of the drive. You can then use Partition Wizard running under Win7, to allocate one or more partitions from within this free space. Again my recommendation is to define it/them as "logical" partition types, not "primary".

Partition Wizard can also assign Windows drive letters to these new partition(s), and you may need to re-boot to complete the process.

Very easy... but the first step is to shrink C, which does require either a re-boot (to finish the 2nd-half of what Partition Wizard needs to do) or just boot to the PW standalone CD and do the function directly from its standalone GUI interface.


(good idea is to back up your data before doing this kind of thing)
My System SpecsSystem Spec

 Regarding my local c drive.

Thread Tools

Similar help and support threads
Thread Forum
local drive and external drive is not accessible
I have HP EliteBook with Processor coreI5 having windows 7 64 bit I can't access local drives and external drives, but if I log in into windows in safe mode I can access it. what should I do in order to get access to the local and external drives in normal mode thanks in advance
Hardware & Devices
Purpose of Local Drive (partition) on GUID Drive - Do I need it?
I have a home built PC about 4 years old running Windows 7 64bit My boot drive (C) has always been a SSD drive and my system is running fine. I had a hard drive failure about 30 days ago, that corrupted my boot drive when it failed. I have recovered from backup using Shadow Protect Desktop...
Hardware & Devices
Samsung s2 external hard drive not loading showing local disk F drive
I have a Samsung s2 1tb external hard drive. Today when I hooked it up to my laptop it would not load. It will shows local F drive when it usually will say samsung Drive. A pop up box will then appear stating "you need to format drive" I know if I reformat it I will lose all my data which...
Hardware & Devices
why is SAN drive recognized as local drive while NAS isn't?
Hi all; Maybe this's just a simple question for experts in storage sharing. Why are SAN drives recognized as local drive while NAS drives aren't? I knew that SAN uses block level transfer to transfer data while NAS uses file level transfer. Does this has anything to do with why SAN drives and...
Network & Sharing
XP Mode real C: drive as the local C: drive
Under XP mode under Win 7 Ultimate 64 bit, neither My Computer nor in a Commannd Box shows my actual C drive. I can see in My Computer under Other the "C on HOSTNAME" and that is my "real" C drive, and I can see all folders there. How do I access the "real" C drive from a Command Box? ...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:47.
Twitter Facebook Google+