Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can not get to Login

10 Jul 2011   #1
ConnorMcCreesh

Home Premium 64bit
 
 
Can not get to Login

I have had a serious problem with my 2 month old PC and it just will not work. I have not installed any new software or done anything to prompt it to stop working.

When I turn the laptop on I it starts to load up, I see the windows logo and before it gets to the screen where I can select users, the screen goes black. If I wait a few minutes the mouse clicker appears, and then a few minutes later if I try to move the mouse the screen dims.

The start up repair brings back nothing and the system restore only has one restore point from a few days ago and that does not work.


When I check the startup repair "view diagnostic and repair details" all of the results are complete successfully.

Here are the problems signatures ;

Problem Event Name: StartupRepairOffline
Problem Signature 01 6.1.7600.16385
Problem Signature 02 6.1.7600.16385
Problem Signature 03 unknown
Problem Signature 04 21200505
Problem Signature 05 AutoFailOver
Problem Signature 06 14
Problem Signature 07 NoRootCause
OS Version 6.1.7600.200.0.256.1
Locale ID 1033


I have run a checkdisk on the C: drive and that has not helped.

Anyone got a suggesting for a fix to this specific problem? I have seen lots of similar but not identical problems and the fixes for them have not seemed to work.

I am no technical wizard, if you have an explination I would really appreciate it in simpleton terms, but if you don't have time for this, I will look up your answer

Thank you for your time,
Kind Regards,
Connor


My System SpecsSystem Spec
.
10 Jul 2011   #2
t-4-2

Windows 7 Home Premium 64-bit, SP1
 
 

Quote   Quote: Originally Posted by ConnorMcCreesh View Post
I have had a serious problem with my 2 month old PC and it just will not work. I have not installed any new software or done anything to prompt it to stop working.

When I turn the laptop on I it starts to load up, I see the windows logo and before it gets to the screen where I can select users, the screen goes black. If I wait a few minutes the mouse clicker appears, and then a few minutes later if I try to move the mouse the screen dims.

The start up repair brings back nothing and the system restore only has one restore point from a few days ago and that does not work.


When I check the startup repair "view diagnostic and repair details" all of the results are complete successfully.

Here are the problems signatures ;

Problem Event Name: StartupRepairOffline
Problem Signature 01 6.1.7600.16385
Problem Signature 02 6.1.7600.16385
Problem Signature 03 unknown
Problem Signature 04 21200505
Problem Signature 05 AutoFailOver
Problem Signature 06 14
Problem Signature 07 NoRootCause
OS Version 6.1.7600.200.0.256.1
Locale ID 1033


I have run a checkdisk on the C: drive and that has not helped.

Anyone got a suggesting for a fix to this specific problem? I have seen lots of similar but not identical problems and the fixes for them have not seemed to work.

I am no technical wizard, if you have an explination I would really appreciate it in simpleton terms, but if you don't have time for this, I will look up your answer

Thank you for your time,
Kind Regards,
Connor

I have no solution for you.
Just want to remind of this....... your warranty is still fresh, don't hasitate to use it if you are unable to receive a resolution.
My System SpecsSystem Spec
10 Jul 2011   #3
boyans

Win 8 RP, Win 7, XP
 
 

Hi,

You can use a system file check to examine and fix system files:
sfc /scannow
wait for the outcome, if errors are reported it can be run a second time to see if there are less errors after the second scan.

As your Windows seems to be without SP1 - have you set automatic updates ?



Have you set update automatically check for the latest drivers and icons, here's how: (from Windows help)
  1. Open Devices and Printers.
    Right-click the name of your computer, and then click Device installation settings.
  2. Click Yes, do this automatically (recommended), and then click Save changes. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    If Yes is already selected, click Cancel to close the dialog box.
My System SpecsSystem Spec
.

10 Jul 2011   #4
ConnorMcCreesh

Home Premium 64bit
 
 

I run the sfc /scannow but it says there is a system repair pending which requires I reboot to complete and then run it again. I cannot just reboot my pc as I only seem to get the option to get to the System recovery options window when I forcefully turn the pc off with the power button, when I do that it does not seem to register and it gives me the same message when I type sfc /scannow again.

For the second point, can I do that without being to get to the desktop?

At the moment I am restricted to - startup repair, system restore, system image recovery, windows memory diagnostic, command prompt, dell factory image restore.

Thanks for your help.

Connor

Quote   Quote: Originally Posted by boyans View Post
Hi,

You can use a system file check to examine and fix system files:
sfc /scannow
wait for the outcome, if errors are reported it can be run a second time to see if there are less errors after the second scan.

As your Windows seems to be without SP1 - have you set automatic updates ?



Have you set update automatically check for the latest drivers and icons, here's how: (from Windows help)
  1. Open Devices and Printers.
    Right-click the name of your computer, and then click Device installation settings.
  2. Click Yes, do this automatically (recommended), and then click Save changes. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    If Yes is already selected, click Cancel to close the dialog box.
My System SpecsSystem Spec
11 Jul 2011   #5
ConnorMcCreesh

Home Premium 64bit
 
 

Anyone able to offer a fix?

Really need to use the laptop for work.

Thanks in advance,
Connor
My System SpecsSystem Spec
11 Jul 2011   #6
deanolfc

windows 7 ultimate x64
 
 

did u have a disk with the newish laptop for video drivers as such can u get into safe mode
My System SpecsSystem Spec
11 Jul 2011   #7
boyans

Win 8 RP, Win 7, XP
 
 

It seems so far the only solution is a Repair Install.

Your Windows 7 installation seems to be before SP1 so a slipsteamed with SP1 installation DVD could do the trick:
Slipstream Windows 7 SP1 into a Installation DVD or ISO File
(The slipstreaming could be done on another computer)
My System SpecsSystem Spec
Reply

 Can not get to Login




Thread Tools




Similar help and support threads
Thread Forum
!! Restored image of windows, now wont login, login service error!!
Hi, my windows was set up like this: C: windows 7 F: all user accounts inluding default user ( users folder ) are on F drive. I imaged windows, and restored it on a different PC. On another HDD, I assigned it as F: and put a copy of the user folders on there. But now when it goes to log...
General Discussion
Multiple user accounts, 1 auto login , how to login to another account
Hi I have a unit i want to have 4 user accounts on and one of them should auto login. How do i change to one of my other 3 accounts? Change user doesnt work, just auto login. Im running Windows embedded standard 7 Best regards
General Discussion
Windows Login hang time, BlackSOD after login
This is quite a confusing story, and the cause for it simply eludes me, but this will be the second time it has happened. Basically, I was on Youtube through Google Chrome. Shockwave Flash crashed on me (and it is well known that Flash will often crash on Chrome), and when Chrome said I should...
BSOD Help and Support
Attempting to login to most websites results in login page refreshing.
When I attempt to log in to many sites (Hotmail, youtube, steam community, razerzone, thinkgeek, my bank, etc.) after hitting "login" the page refreshes to show both the username and password fields blank and I am not logged in. I'm running Windows home premium 64bit, and I'm using Firefox...
Browsers & Mail
Remove user login icons from login screen?
Is it possible to have users but not have their login icon appear on the login screen?
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:13.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App