Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Reset to device

16 Jul 2011   #1
agriz

Windows 7 Ultimate 32bit
 
 
Reset to device

Reset to device, \Device\RaidPort0, was issued.
I am getting this warning and system is hanging on that time.

What does it mean? Google search gives lot of explanation for this. So, I really don't know what could be the real reason

Thanks


My System SpecsSystem Spec
.
16 Jul 2011   #2
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

My System SpecsSystem Spec
16 Jul 2011   #3
agriz

Windows 7 Ultimate 32bit
 
 

After Bios reset, I have lot more error messages.

* The following boot-start or system-start driver(s) failed to load:
AFD
CSC
DfsC
discache
ehdrv
NetBIOS
NetBT
nsiproxy
Psched
rdbss
spldr
tdx
Wanarpv6
WfpLwf

* The Network Location Awareness service depends on the Network Store Interface Service service which failed to start because of the following error:
The dependency service or group failed to start.

* The SMB 2.0 MiniRedirector service depends on the SMB MiniRedirector Wrapper and Engine service which failed to start because of the following error:
The dependency service or group failed to start.

* The SMB 1.x MiniRedirector service depends on the SMB MiniRedirector Wrapper and Engine service which failed to start because of the following error:
The dependency service or group failed to start.

* The SMB MiniRedirector Wrapper and Engine service depends on the Redirected Buffering Sub Sysytem service which failed to start because of the following error:
A device attached to the system is not functioning.

* The IP Helper service depends on the Network Store Interface Service service which failed to start because of the following error:
The dependency service or group failed to start.

* The Workstation service depends on the Network Store Interface Service service which failed to start because of the following error:
The dependency service or group failed to start.

* The Network Store Interface Service service depends on the NSI proxy service driver. service which failed to start because of the following error:
A device attached to the system is not functioning.

* The TCP/IP NetBIOS Helper service depends on the Ancillary Function Driver for Winsock service which failed to start because of the following error:
A device attached to the system is not functioning.

* The DNS Client service depends on the NetIO Legacy TDI Support Driver service which failed to start because of the following error:
A device attached to the system is not functioning.

* The DHCP Client service depends on the Ancillary Function Driver for Winsock service which failed to start because of the following error:
A device attached to the system is not functioning.

* Reset to device, \Device\RaidPort0, was issued.

The order is from latest. I didn't attach any new device. It was working good. My avast stopped working and I don't even able to check events. I hanged every time I boot computer. So, I did a format and installed a fresh copy of Windows. Now i have NOD32 Trial version. If it is good, I will go ahead and buy.

Now computer have installed the following.
Notepad++
Nod32
VLC
Wamp
Firefox 3.x
Chrome and utorrent

That is it
My System SpecsSystem Spec
.

16 Jul 2011   #4
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Hi Agriz. Do you mean your system is OK now?
I would recommend MSE, link in my sig as a better AV than NOD32, and it's free!

If you still need help, try running SFC /SCANNOW Command - System File Checker
My System SpecsSystem Spec
16 Jul 2011   #5
agriz

Windows 7 Ultimate 32bit
 
 

I don't know anything. It seems to be working. I am running the scan. I will post the result
My System SpecsSystem Spec
16 Jul 2011   #6
agriz

Windows 7 Ultimate 32bit
 
 

Windows Resource Protection did not find any integrity violations.
My System SpecsSystem Spec
16 Jul 2011   #7
agriz

Windows 7 Ultimate 32bit
 
 

I tried chkdsk /r didn't find any problem in that too.
My System SpecsSystem Spec
17 Jul 2011   #8
agriz

Windows 7 Ultimate 32bit
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Hi Agriz. Do you mean your system is OK now?
I would recommend MSE, link in my sig as a better AV than NOD32, and it's free!

If you still need help, try running SFC /SCANNOW Command - System File Checker
I used mse. But it allows virus inside and then it cures it. But avast and Nod32 never allow such a site to view. They block them immediately.

Are you sure MSE is the best? If so, I will do it now.
My System SpecsSystem Spec
17 Jul 2011   #9
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Personally, I think Norton is the best, and I think MSE is better than NOD32. MSE will still find and kill badware and it's definitions are updated through Windows Updates. I am using MSE on a XP install I have.
My System SpecsSystem Spec
Reply

 Reset to device




Thread Tools




Similar help and support threads
Thread Forum
how to Unrecognize/reset a device?
Hi, its me again :D working on i7 920 with Windows 7 Home premium 64 Bit. Im having trouble recognizing a Hauppauge 2250 tv card, was working fine before, but i had to do a fresh install of Windows due to a attack on my system. now it says that it doesnt recognize the device yet the software is...
Hardware & Devices
BSOD Still crashes after a factory reset. Attempt to reset the display
BSOD Still crashes after a factory reset. Attempt to reset the display driver and recover from timeout failed. I thought a clean factory reset will fix the issue. But it is still has the BSOD. I have uploaded the zip file that contains the dump as instructed.
BSOD Help and Support
Tons of files missing, desktop reset, browsers and toolbars reset...
Hello everyone, I'm kind of freaking out right now. I turned my computer off about 12 hours ago, and now that I turned it on again it took much longer than usual for it to prepare the desktop. When I got in, there are about 50 % of my desktop icons missing, the programs I had attached to the...
General Discussion
EVENT ID 129 Reset to device, \Device\RaidPort1, was issued.
Hi when i try to burned one dvd the system shoe me the error "Reset to device, \Device\RaidPort1, was issued." Specificacion: MB: MSI k9n sli platinium chipset: NVIDIA® nForce 570 SLI MCP MEM: 4 gigas HD: 3 hard disk (2x80 gigas and 1 500 gigas) all in diferent port sata and without ...
Hardware & Devices
USB device detection - Any way to reset it?
I have been wanting to find a way to reset windows 7 so when I plug in a device into a particular USB port it detects it as though for the very first time (installing device drivers message etc). Disabling or uninstalling drivers do not seem to instigate a 'new device routine'. Any ways of doing...
Hardware & Devices
Can I remove a usb device from the 'reset list'
I did a fresh install of w7 and have an issue where as after returning from hibernation. My usb devices are reset. I can hear the windows sound of a usb device being unplugged/plugged in. The problem is that this causes the software which was using the device to no longer work without being...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 18:23.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App