W7 cannot find boot device.

I have read and tried other fixes for this on this forum. None work however. A friend shipped me a used computer. During shipment a wire had come off the main HD. I did try to start the machine without knowing the wire was off. I got the "bootdevice" message. After talking with my friend I found and replaced the wire. I tried doing a "repair" using F8 but no luck. I can however use the option to "start my computer using the last known etc." Everything works fine, but when I shut the machine off I get the "can't find bootdevice" again when I restart. What do I have to change in my bios settings to make the machine boot normally?
Thanks in advance.
Bob G.

Very interesting. Can you make sure that there's nothing else set to boot first? Check your boot sequence. This may not be the solution but I'd recommend just making sure.

I think I've seen something like this happen before but it was trying to boot from another device besides the hard drive. Interesting to see any responses here.

Yes, it is most likely the boot priority in the BIOS. On my computer, any time that I add, subtract or change the drives in any fashion, the boot sequence gets changed.

Thanks for the response. Would you be so kind as to point me where to go in the Bios to change my boot settngs and if C: drive is where the OS resides, how to set it to the proper settings to boot correctly?
Thanks. Bios is Phoenix by the way.
Bob G.

I'm not certain about your BIOS, but it should have a tab labeled Boot, or something similar. You will need to know the model number of the drive, which you will find in the Device Manager, because the drives are not IDed by drive letter. In my BIOS, there are two places to check on the Boot tab, first where the drives are listed, you need to move the boot drive to the first location, then where you set the priority, place it first there, unless you have need to boot from a floppy or optical drive, and if you do, change the hard drive back to first afterward.

Ok, thanks for that info. I will give it a try.
Bob G.

Here is where I am. I used the Windows 7 CD to repair the start up. I can now get to the "Windows Starting" screen but nothing further. I went into the BIOs and everything seems to check out in the correct order. Here are some other oddities. If I go in through F8 and select "use last known working configuration" option it gets me to the desktop just fine. All programs work just fine. Once I was in I tried setting a restore point but it still would not boot up beyond the "Windows Starting" screen. Safe Mode works too. There must be a boot setting off besides the boot order. Crazy huh?
Bob G.

Tried the repair multiple times with no luck. Bios has been set to default. It still won't boot to windows.
Bob G.