Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Help with dual hardrive config.

28 Jul 2009   #11

Windows 7 Ultimate 64-bit RTM

I've seen brand new laptops support RAID 0 and RAID 1 (ie: Maingear's EX-L 18). But it is unfortunately yours only does RAID 0. Still, I don't think I've seen any laptop handle a JBOD.

As for the wipe/install I'd just do it and get it over with. But if your laptop can use two HDDs internally in a RAID 0 array, I'd purchase another to match and do it before the new install. The performance gains are worth it since mechanical HDDs are cheap these days.

My System SpecsSystem Spec

 Help with dual hardrive config.

Thread Tools

Similar help and support threads
Thread Forum
How to properly remove Win7, in a dual boot config
Good afternoon. First off, I've been scouring Google for an answer to this (naturally including a couple tuts on this site), but most of those seem to involve a situation where 7 & 8 are installed on the same physical drive. My situation is this: Windows 7 was installed first. The System...
Installation & Setup
Newb Questions About Dual Monitor Config
O.K. I finally was able to install both Intel IGPU and AMD vidcard on my ASUS Z77 V Pro, both enabled. Intel graphics drivers on IGPU and AMD drivers on 7970 DVI-D vidcard, 24" Dell on PCIe (default) and 22" Viewsonic on IGPU VGA. So, I fire it up and I have desktop and icons and taskbar on...
General Discussion
Win7 does not restore Dual Display config after a Reboot
Hi, all I have a strange problem with 2 displays connected to my ATI HD4770 Video Card running the latest 10.12 drivers and AMD Control Center. I have 2 displays connected to the card. The display 1 (Samsung Syncmaster 225BW) runs at 1680 x 1050 and is the Main display with the Win7 Start...
Backup and Restore
dual net config dhcp or static ip
Is there a way to have 2 different configurations, one DHCP, the other with a static IP on one network card ? And if yes, how can I switch from one to another (besides making scripts that change the settings) I need a static address at work and DHCP at home. I know some small progs are able to...
Network & Sharing
Need assistance with dual network config
A network configuration specialist is required to assist the OP here:
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:21.
Twitter Facebook Google+