Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: YUMI MultiBoot...more than one Windows 7 ISO possible?

09 Feb 2012   #11
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Thanks for the help guys - with Derek's help I was able to use the WAIO Tool to get this sorted.


My System SpecsSystem Spec
.
23 Dec 2012   #12
congo

Windows 7 32bit
 
 
Yumi Multi Boot

Well i am trying to instal Windows Xp ,7 and 8 with yumi but when i boot , it boots windows 7 and 8 but after i press install button it shows a error dvd/usb not found ?

is there any solutions.

i want to istall 3 windows eg Windows XP, Windows 7 and Windows 8 is it possible
My System SpecsSystem Spec
23 Dec 2012   #13
gregrocker
Microsoft MVP

 

Just unlock all verisons using eicfg removal tool.

But are you then able to add both the 32- or 64- bit ISO's to Yumi without going the AIO route?

I have a new Kingston Data Traveler 16gb USB 3.0 flash stick ($12 free shipping buy.com) and would like to make it Yumi for all of my bootable tools, but it won't boot on any PC getting black screen flashing cursor at boot with Verifying DMI pool data error.

Any suggestions? It boots fine when I load Win7 installer using Ultra ISO which uses nt60 bootsect instead of Isolinux.
My System SpecsSystem Spec
.

25 Dec 2012   #14
congo

Windows 7 32bit
 
 

Dear gregrocker my problem is i have 3 windows on my usb stick, it boots fine but when installing it give an error usb/dvd driver not found.

In a previous thread a friend told me to add FiraDisk drivers but it only supports USB 3.0 mine is 2.0

any suggestions
My System SpecsSystem Spec
25 Dec 2012   #15
gregrocker
Microsoft MVP

 

What 3 Windows installers do you have on your stick? Drop back to just the one needed for install now to see if that solves the issue. You can remove the others using Yumi interface.

Colin may have other suggestions as he is more familar with this than I.
My System SpecsSystem Spec
27 Jan 2013   #16
fango

Windows 7 Ultimate x64
 
 

I also have some problems when creating multiboot (8gb usb) win7/winxp/hirens .. all iso's are placed into yumi tool without problems, following tutorial, and when boot from usb, hirens works ok, nothing else wont .. here's a error upon windows installation:

http://tinyurl.com/awcpgnl


.. also, is there a way to place more than one windows 7 iso (x64 and x86) cause I dont see windows 7 option anymore after adding first 7 iso? .. any other tool perhaps?


thanks!
My System SpecsSystem Spec
27 Jan 2013   #17
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

I haven't done it in a while, but as I recall, the program will tell you that if you have a Linux distro on the USB stick, there is one file in Windows you have to rename for it to work.

EDIT: I found it. You have to rename SOURCES to SOURCESWIN to boot to a Linux, and rename it back to boot a Windows install iso.
My System SpecsSystem Spec
28 Jan 2013   #18
fango

Windows 7 Ultimate x64
 
 

Do you mean to rename whole "sources" folder under boot menu tree? (see attach.) .. nothing else?


thanks!


Attached Images
YUMI MultiBoot...more than one Windows 7 ISO possible?-capture.png 
My System SpecsSystem Spec
28 Jan 2013   #19
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Sorry, I can't find it again, but what I wrote last night is exactly what it said. I can't find it again.
My System SpecsSystem Spec
28 Jan 2013   #20
fango

Windows 7 Ultimate x64
 
 

I see, but never the less I'm stuck here, dont know what you mean exactly, to rename sources folder and then rename it back to boot? .. hm
My System SpecsSystem Spec
Reply

 YUMI MultiBoot...more than one Windows 7 ISO possible?




Thread Tools




Similar help and support threads
Thread Forum
Yumi Multiboot USB Creator - Anybody try this?
Has anybody tested this before? YUMI - Multiboot USB Creator (Windows) | USB Pen Drive Linux It appears to promise a way to boot from USB to multi and select-able ISOs? So the software would format the USB drive for me once, and I could then add ISOs for Windows 7 pro, Ghost and GParted? ...
Installation & Setup
cannot boot AcronisTrueImage.iso with yumi
cannot boot acronis true image with yumi I installed ''ACRONIS TRUE IMAGE 20014 '' i activate it, I successfully booted on my CD and USB etc... But my problem is that i want to create a multiboot images with YUMI and for that i need acronis.iso I create a bootable acronis.iso, i save it on my...
Backup and Restore
yumi multiboot problem with XP,got error28
yumi multiboot problem with XP,got error28 So i want to use yumi multiboot to run 2 things: 1.Acronis True Image(acronis.iso) and working perfect 2. WindowsXP black edition(WindowsXPBlackEdition2015) and here come the problem,i got Error28:Selected item fit into your memory(stage1) - HDD 26...
Backup and Restore
Yumi issue ??
I normally use grub4dos on my multiboot usb flash drives but decided to play with YUMI. I used a Patriot 8GB USB 3 (no switch) and YUMI-2.0.0.9. I've somehow ended up with a flash drive that has become readonly/ write protected. I've tried everything I could think of and searched for possible...
Installation & Setup
YUMI Syystem Tools option not available
I love booting to YUMI and picking which ISO I want to run. I have 3 Macriuym ISOs on my YUMI but there are no options for Antivirus or System Tools I would like my YUMI USB to have all of the above. How come these options are displayed on Golden's tutorial but they are not found on my YUMI.
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:05.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App