Can't boot normally after gparted realignment

Kaktussoft said:

johntf said:

Hi Kaktussoft,
Attached is a screenshot of what happens when I type exactly what you said. All the error messages are the reason I thought I was missing something, which I obviously am!

Code was a little bit wrong ... sorry. I updated it in thread. c:\recovery\windowsre has been created succesfully. All you must do now

Code:

 
D:
cd \recovery\windowsre
xcopy /h winre.wim c:\recovery\windowsre
xcopy /h boot.sdi c:\recovery\windowsre

did copy succeed succsful?

did you do
reagentc/disable
REAGENTC /SETREIMAGE /PATH C:\Recovery\windowsre\
reagentc/enable

?

post output of bcdedit/enum all !!!!
but first do the reagentc commands if not done yet

Hi there,

My bcdedit output reads :

Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \bootmgr
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {1f8184a2-14de-11df-9734-f08c6d8c50b0}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 10

Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7 Home Premium
locale en-US
recoverysequence {f3fff01e-a260-11e1-a1e8-848f69c777b3}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {19559bd2-a197-11e1-9581-806e6f6e6963}

Windows Boot Loader
-------------------
identifier {07288cf1-a1e2-11e1-b319-91d364d3f396}
device ramdisk=[\Device\HarddiskVolume2]\Recovery\windowsre\Winre.wim,{07288cf2-a1e2-11e1-b319-91d364d3f396}
path \windows\system32\winload.exe
description Windows Recovery Environment (recovered)
locale
osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\windowsre\Winre.wim,{07288cf2-a1e2-11e1-b319-91d364d3f396}
systemroot \windows
winpe Yes

Windows Boot Loader
-------------------
identifier {07288cf3-a1e2-11e1-b319-91d364d3f396}
device ramdisk=[\Device\HarddiskVolume5]\Recovery\windowsre\Winre.wim,{07288cf4-a1e2-11e1-b319-91d364d3f396}
path \windows\system32\winload.exe
description Windows Recovery Environment (recovered)
locale
osdevice ramdisk=[\Device\HarddiskVolume5]\Recovery\windowsre\Winre.wim,{07288cf4-a1e2-11e1-b319-91d364d3f396}
systemroot \windows
winpe Yes

Windows Boot Loader
-------------------
identifier {f3fff01e-a260-11e1-a1e8-848f69c777b3}
device ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{f3fff01f-a260-11e1-a1e8-848f69c777b3}
path \windows\system32\winload.exe
description Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[\Device\HarddiskVolume2]\Recovery\WindowsRE\Winre.wim,{f3fff01f-a260-11e1-a1e8-848f69c777b3}
systemroot \windows
nx OptIn
winpe Yes

Resume from Hibernate
---------------------
identifier {19559bd2-a197-11e1-9581-806e6f6e6963}
device partition=C:
path \Windows\system32\winresume.exe
description Windows 7 Home Premium (recovered)
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No

Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume2
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes

EMS Settings
------------
identifier {emssettings}
bootems Yes

Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200

RAM Defects
-----------
identifier {badmemory}

Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}

Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200

Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}

Device options
--------------
identifier {07288cf2-a1e2-11e1-b319-91d364d3f396}
ramdisksdidevice partition=\Device\HarddiskVolume2
ramdisksdipath \Recovery\windowsre\boot.sdi

Device options
--------------
identifier {07288cf4-a1e2-11e1-b319-91d364d3f396}
ramdisksdidevice partition=\Device\HarddiskVolume5
ramdisksdipath \Recovery\windowsre\boot.sdi

Device options
--------------
identifier {1f8184a5-14de-11df-9734-f08c6d8c50b0}
description Ramdisk Options
ramdisksdidevice unknown
ramdisksdipath \Recovery\1f8184a4-14de-11df-9734-f08c6d8c50b0\boot.sdi

Device options
--------------
identifier {f3fff01f-a260-11e1-a1e8-848f69c777b3}
description Ramdisk Options
ramdisksdidevice partition=\Device\HarddiskVolume2
ramdisksdipath \Recovery\WindowsRE\boot.sdi

I can disable and re-enable REAGENTC, but I get this message :

C:\Windows\system32>REAGENTC /SETREIMAGE /PATH C:\Recovery\windowsre\winre.wim
REAGENTC.EXE: Operation failed: 3
The system cannot find the path specified.

you posted the old bcd file from harddisk. Boot from SSD and post bcdedit/enum all output

bcdedit/store c:\boot\bcd /enum all

post output

REAGENTC /SETREIMAGE /PATH C:\Recovery\windowsre\
reagentc/enable
reagentc/info

post output

reagentc output looks fin now!

bcd33.txt is output of bcdedit /enum all ???? So you have booted to ssd??