New
#51
reagentc/disable (already done?)
bcdedit/delete {f38191ca-a1a9-11e1-8b23-848f69c777b3}
bcdedit/delete {f38191cb-a1a9-11e1-8b23-848f69c777b3}
reagentc/enable
from elevated command prompt and booted to ssd!
reagentc/disable (already done?)
bcdedit/delete {f38191ca-a1a9-11e1-8b23-848f69c777b3}
bcdedit/delete {f38191cb-a1a9-11e1-8b23-848f69c777b3}
reagentc/enable
from elevated command prompt and booted to ssd!
Yes! All done. I have also deleted the two items in your next post after the quoted one, except I still cannot re-enable reagentc - it gives me the reason Access is Denied.
Below is one more bcd output - I rebooted and specifically selected the SSD - although that is first in my preferred boot sequence anyway.
Windows Boot Manager
--------------------
identifier {bootmgr}
device boot
path \bootmgr
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {default}
resumeobject {1f8184a2-14de-11df-9734-f08c6d8c50b0}
displayorder {default}
toolsdisplayorder {memdiag}
timeout 10
Windows Boot Loader
-------------------
identifier {default}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7 Home Premium
locale en-US
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {19559bd2-a197-11e1-9581-806e6f6e6963}
Resume from Hibernate
---------------------
identifier {19559bd2-a197-11e1-9581-806e6f6e6963}
device partition=C:
path \Windows\system32\winresume.exe
description Windows 7 Home Premium (recovered)
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device boot
path \Boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes
EMS Settings
------------
identifier {emssettings}
bootems Yes
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}
Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Code:bcdedit/set {bootmgr} resumeobject {19559bd2-a197-11e1-9581-806e6f6e6963} bcdedit/set {19559bd2-a197-11e1-9581-806e6f6e6963} description "Windows Resume Application"
Done, done and done! To save you having to ask, attached :
fromr elevated command prompt:
reagentc/enable
if failing post screenshot
and post reagentc/info
post outputCode:c: cd \recovery\windowsre attrib -h -s boot.sdi attrib -h -s winre.wim dir
See below
C:\recovery\windowsre>dir
Volume in drive C is OS
Volume Serial Number is BF34-F655
Directory of C:\recovery\windowsre
10/06/2009 22:06 3,170,304 boot.sdi
21/03/2012 14:17 187,264,117 winre.wim
2 File(s) 190,434,421 bytes
0 Dir(s) 36,989,624,320 bytes free