Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Event Viewer

28 May 2012   #31

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1

just took another look at EV & see that WMI showed up 2 mins. after the i8042prt. Now I'll do the Fixit.

My System SpecsSystem Spec
28 May 2012   #32

x64 (6.3.9600) Win8.1 Pro & soon dual boot x64 (6.1.7601) Win7_SP1 HomePrem

@grits: There a lots of folks around here that can help. You needn't wait for me. I got the info from Hammerhead and tried it. If it's a Mr.Fixit, you can be fairly sure that it will work - sometimes you might have to read the KB to be sure it's what you want (I know, I know.... that means you have to understand what they're talking about in the first place - lol). You'll be a guru fairly soon if you hang around here - I can already tell the difference - more confidence and clarity in your posts.
My System SpecsSystem Spec
28 May 2012   #33

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1

Now I'm off to look further into the keyboard issue.

Thanks a million!!!
My System SpecsSystem Spec

29 May 2012   #34

win 7 X64 Ultimate SP1
Clean Boot?

I had to help someone install a CB in a truck. So I was busy yesterday afternoon. I am wondering where you stand now on your errors at boot. Have some of them went away? You have been busy.
My System SpecsSystem Spec
29 May 2012   #35

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1

The WMI is gone since I did the MSFixit yesterday, although I haven't re-booted this morning. (left machine on overnight to check up on my System Restore which isn't working right but that'a another issue). Now I have a couple DNS Client Events, ID 1014 that I'll need to check out.

Have a couple other small issues in other areas that I need to check out so will leave Events alone for a bit.

Thanks for your help.
My System SpecsSystem Spec
29 May 2012   #36

win 7 X64 Ultimate SP1
One More

If you haven't done it yet try this. Open a command prompt. Open it as administrator. (left click and select run as admin). Type in "SFC /Scannow". Wait for results if it finds problems. Run it again (at least 3 times) till it reports no problems. Also you can boot into safe mode and run it (might help).
My System SpecsSystem Spec
29 May 2012   #37

x64 (6.3.9600) Win8.1 Pro & soon dual boot x64 (6.1.7601) Win7_SP1 HomePrem

@grits: Don't worry too much about the Events Log, it's most useful when you're experiencing some particular issue. Otherwise, it's just there collecting information on events. There's way too much information presented and you can filter out ones that you know are unimportant (starting xyz, stopping xyz), but I generally only use Event viewer to chase down a problem.

The Action Center (Control Panel => Action Center or the flag in the notification area) should alert you of any issues that you need to address - no need to go looking / deciphering events.

the 1014 error is probably just telling you that it can't connect at this time - perhaps it's a bit hasty launching DHCP services before dependent services are fully active. But yeah - you should check it out, for your own satisfaction.
My System SpecsSystem Spec
29 May 2012   #38

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1

I don't know if this is related to my clearing Events yesterday or running the MSFixit for WMI or something else.

I didn't pay any attention to the Taskbar yesterday so don't know when it happened but this morning I see a change in the icon for my Windows Mail. What if anything should I do? I did click on it earlier & my mail window did open. Here's what I have now.

Attached Images
Event Viewer-capture-_-my-windows-mail-icon-changed.png 
My System SpecsSystem Spec
29 May 2012   #39

MS Windows 7 Ultimate SP1 64-bit

I recommend clearing the Event Logs to get rid of all of the chaff.

A master explanation of all possible events would be nice. Does not exist. There are some commercial products which will cover many of them.

Your best bet is always to read the description inside EventViewer and to google the event.


Step 1: Create a powershell script
Open NotePad.

Copy following into notepad:
Get-WinEvent -ListLog * -Force |
% { $_.logname;Wevtutil.exe cl $_.logname };
Wevtutil.exe cl system

Save as ClearEvents.ps1 in %userprofile%\desktop

Close Notepad

Step 2: Create a shortcut to have powershell run the script
on an empty spot on your desktop
Choose NEW -> Shortcut

In the box,
Enter powershell.exe & %userprofile%\desktop\ClearEvents.ps1

Type CLEAR EVENTS (or any name of your choice)
FINISH button

Step 3: Run the script
The shortcut must be run as administrator.
Choose Run as Administrator

If Powershell complains,then
Run PowerShell as administrator and set the script execution policy
type PowerShell | do NOT hit Enter |
right-click on PowerShell (at top of list) |
choose Run as administrator

Enter following commands:
Set-ExecutionPolicy remotesigned

You can now proudly declare yourself a PowerShell user and aficionado. Now all you need is a COMPUTER GEEK badge. Batch files are so blasť.

There is nothing magic about %userprofile%\desktop. If you already have a C:\Scripts folder, then you may prefer to store the ClearEvents.ps1 script there.

Want to stay in Powershell after running the script? Add -noexit to the shortcut’s target (right-click on the shortcut. Properties, Shortcut tab, Target field).
powershell.exe -noexit & %userprofile%\desktop\ClearEvents.ps1



The number of events in the event logs can be overwhelming.
Purging the logs so that only fresh events are present can be helpful
in troubleshooting.

Start Orb | type NOTEPAD | ENTER


@echo off
FOR /F "tokens=1,2*" %%V IN ('bcdedit') DO SET adminTest=%%V
IF (%adminTest%)==(Access) goto noAdmin
for /F "tokens=*" %%G in ('wevtutil.exe el') DO (call :do_clear "%%G")
goto theEnd
echo clearing %1
wevtutil.exe cl %1
goto :eof



Right-click on ClrEventLogs.BAT
Click on Run as Administrator

The list of cleared logs will fly by on the screen.
If you would like to see the list, then remove the two double colons
in front of the pause statement at the very end of the BAT file.
My System SpecsSystem Spec
29 May 2012   #40

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1

I did use that batch file yesterday, guess my posts, #26, #31, #33 weren't clear about that.

My concern today is my post # 38. My bad for not starting a new thread I suppose but clearing the EV & running the MSFixit were the only things I did yesterday & hadn't done anything yet this morning when I noticed the change.
My System SpecsSystem Spec

 Event Viewer

Thread Tools

Similar help and support threads
Thread Forum
Event Viewer Event Id 2002, Source: EapHost, Log Application
Well, I tryed to manage page-file but unfortunataly it resulted in problems. Then I lost VAIO-CARE and 7 ZIP files too. When I open Event Viewer every single day I see this: event Id 2002, Souce: Eap Host, Log name: Application and number of Eventes: 84. As I am desparate about that, What sould...
General Discussion
Event errors (11, 7000, 7026), intellipoint and event viewer freeze.
Hi, keep getting the errors above every startup regarding; 11 - "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications." 7000 - "The Crypkey License service...
General Discussion
BSOD when watching videos on youtube, Event 41 in Event Viewer
It's been a while since I've experienced a BSOD as I'm viewing a video on youtube. It would freeze as if the audio was caught in mid-stream then BSOD, then would restart automatically. I go to Event Viewer after windows as loaded and I see Event 41 Kernel-Power in there. I had this issue...
BSOD Help and Support
After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot
I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both. I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were...
BSOD Help and Support
WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)
Hi, I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating" Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words)...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:58.
Twitter Facebook Google+