Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows resumes from standby and goes to standby right away

27 May 2012   #1
Arun

Windows 7 RC build 7100
 
 
Windows resumes from standby and goes to standby right away

I am an extensive Windows user but this problem has me totally confused. I have done lot of searching on web but cannot find a good answer.

Windows 7 home premium, 64-bit
HP Envy 3D laptop with 8GB memory, no custom hardware

I have configured a backup job which wakes up the laptop at midnight, takes a backup and puts laptop into standby again. All this happens with the laptop lid closed. The power scheme is configured to put laptop into standby when lid is closed.

The resume from standby, backup and suspend after backup is controlled by Windows Home Server (2003) console which is installed on the laptop. I had purchased the HP laptop in October of last year and this job used to work just fine. Sometime in March of this year, the backup stopped working.

After checking the logs and physically observing the laptop at midnight, I found that the laptop resumes from standby at the scheduled time but immediately goes into standby if the lid is closed. The backup fails. Windows event logs indicate that laptop lid close action is putting system into standby.

If the lid is open, then the laptop resumes from standby, stays awake, backup proceeds and laptop goes into standby again.

Here are my problems:
a) Why did the backup work for several months and then stopped working?

b) I have other laptops in the house running Windows 7 home premium on variety of hardware (all HP) and they do not have any issue. Even with the lid closed, they resume from standby, do a backup and go into standby again. The power scheme on all these laptops is set to put laptop into standby when lid is closed. I have verified from physically observing the laptops during backup time.

I have checked all the usual suspects like BIOS updates, driver updates, run sfc, completely deleted the Windows Home Server console from laptop and re-installed after deleting all past backups but nothing seems to help. Is there some setting that I have overlooked? Any ideas will be greatly appreciated.

Thanks...


My System SpecsSystem Spec
.
27 May 2012   #2
billytale13

Windows 7 Professional 64bit
 
 

try disabling the "put laptop into standby when lid is closed" option in the power settings. If it works properly when the lid is open, then it seems that the problem is with this option. I don't know why it would stop working all of a sudden after it has been working for a while. Have you installed any new programs by any chance, or deleted any when it stopped working?
My System SpecsSystem Spec
27 May 2012   #3
Arun

Windows 7 RC build 7100
 
 

Thanks for reply. I have been racking my brains but I just cannot remember what I did during that 10 days period. I remember installing printer driver so I uninstalled it but no luck. I will check the option that you suggested.
My System SpecsSystem Spec
.

Reply

 Windows resumes from standby and goes to standby right away




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 Ultimate 64 bit won't go in standby
Hi to all i have this problem since many month. Windows won't go in standby. (or sleep) I start this command with administration mode: POWERCFG -energy I attach file txt about the report.
Performance & Maintenance
How can I stop the STANDBY in Windows 7?
Dear all! I am LUCK. I am using Windows 7 Professional. I am playing the songs and about minutes later it becomes standby automatically so it's the interruption of my watching, especially when there is no touching. What must I do to keep it active though I am not touching any keys or mouse?...
General Discussion
Windows 7 crashes - monitors go on standby
Hi, Problem Windows 7 randomly crashes My 2 pc monitors that are connected, simply go on standby The computer appears to still be running, as my external hard drive is connected with the light on. In order to get my PC back, I need to force a restart, by holding down the power button on...
BSOD Help and Support
windows 7 pro 64 bit BSOD After Standby Wakeup
hi everyone, I have a desktop with i7 920 and ati hd 4870 video card, 1TB hard drive, running windows 7 pro 64bit. I get BSOD after standby wakeup these days. Below is my information: I also attached my dmp file. Please help me. thank you very much.
BSOD Help and Support
Windows 7 crashes after coming out of standby
I am running a dell xps m1330, 2.0 ghz 32 bit intel core duo, and a geforce 8400M GS video card. After I installed windows 7 after a random but lengthy set of computer idle time (ie 4-6 hours). I will come back to the computer, boot it up, and it will tell me that it has suffered an unexpected...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:40.
Twitter Facebook Google+