Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Windows failed to start problem

06 Oct 2012   #21


Are you using WIn7? If so rightclick on the downloaded ISO file to Burn with Windows Image Burner to a fresh DVD.

If not use Windows 7 USB-DVD Download Tool with a freshly downloaded ISO from official source only. I've provided this several times.

My System SpecsSystem Spec
06 Oct 2012   #22
Shae Rome

Windows 7 64 bit.

Yes I know you have, but it said Unable to make it a bootable device with bootsec.
My System SpecsSystem Spec
06 Oct 2012   #23


What says that? Can you please be more fully descriptive so we can help you get this going?

If the MS tool won't write to flash stick try Universal USB Installer with Win7 in dropdown menu. If ImgBurn won't work then use WIndows Image Burner to burn DVD.

If these all fail then please explain fully exactly what you are trying to do, what tool you are using, and what else you've tried.
My System SpecsSystem Spec

06 Oct 2012   #24
Shae Rome

Windows 7 64 bit.

Windows 7 usb/DVD downloader, It says all files were succesfully downloaded but it failed to make it a bootable device with bootsec.
My System SpecsSystem Spec
06 Oct 2012   #25

Windows 7 Home Premium 64-bit; windows 8 release preview 64-bit; Linux Mint 64-bit

If you have any linux cd's (which you can burn easily if you have a second computer) insert it, then get all your important information from your hard drive by using the cd as a "live cd". as what that means is your running an OS on a cd, wait for it to load, it may take a while, but its worth it if you want to get all your information from your hard drive, as soon as you get all your information and etc. Reinstall a clean copy of windows and wipe your drive. If you dont want any of your informtion then just wipe your drive and install windows. Ether way it's no biggy, it happens to the most of us.
My System SpecsSystem Spec
06 Oct 2012   #26


OP can't burn or write an installer ISO to DVD or stick no matter what method is given.

What about the Universal USB Installer which works for everyone who's tried it?

Quote   Quote: Originally Posted by Shae Rome View Post
Im using img burner with a 700MB blank computer disc and it comes up same result with my computer, it goes to the specs page.
I asked you what download you were referring to here since we'd given you steps to use boot disks to repair Win7 or rescue your files. You never replied.

However if you were trying to burn the installer ISO to CD here then you need to use a DVD because a CD is not big enough.

Please clarify.
My System SpecsSystem Spec

 Windows failed to start problem

Thread Tools

Similar help and support threads
Thread Forum
Windows failed to start
Hi, I can not run my Windows 7 x64. I get the message: Status: 0xc000000f Info: selection of shoes failed because the device is not required. I tried to use the Windows installation disc to "Repair your computer" but when I chose "System Recovery Options" was not able to detect the...
General Discussion
Windows Updates Failed BITS failed to start error code 2147024894
anybody have any ideas? have tried sfc /scannow also the steps in this but to no avail, i still receive the error message i have also used take ownership on the downloader file in...
Windows Updates & Activation
Windows failed to start
Hello all, I have a Asus Netbook. It came pre-installed with Windows 7. I installed Ubuntu. It was a dual boot setup. I used Ubuntu a lot and decided to uninstall it. I was removing it by following a tutorial using EasyBCD. I did as mentioned and now my computer boots into a black...
BSOD Help and Support
Acer won't start, Black screen / Windows failed to start
Hi, Can someone please help me? I'm a first-time forum user :o I've got an Acer Aspire laptop here that has decided to stop loading/starting up. When I turn the power button on: - I can see the Acer logo screen (and also get into setup if I press F2) - The cursor (_) blinks once or twice...
General Discussion
Network Problem: The Dependency service or group failed to start.
Hi I have recently found a computer in a skip :) SCORE! It works and all but I want to get internet and when I open the network and sharing center it says "The dependency service or group has failed to start" I found this post...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:24.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App