Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Startup Repair Bug, CHKDSK on boot and occasionally beep at post?

18 Nov 2012   #1

Windows 7 Home Premium 64bit
Startup Repair Bug, CHKDSK on boot and occasionally beep at post?

Hi all,

I need your advice. Is my harddisk failing? This problems started many months ago. On and off.

1. It started with display driver crash and restart on recovery when visiting youtube website. It lead to bsod if you continue using without restarting. Next it detect hd6950 as 6800 Series in dxdiag after system restore.

2. It progress to loud beep at post screen slowly booting to windows 7. With lag delay in opening program at windows. Which i have to manual restart.

3. Startup Repair occur few months later. Sometime it repair the error. Sometime prompt to restore before booting to windows 7.

4. Soon Startup Repair mention unable to repair or restore. Prompt send or dont send report. Click finish to shutdown. After i power on it boot to windows 7 normally.

5. After i run avast on boot. Which send most to virus chest including msvcr80.dll and other system files. After sometimes avast service stop running despite restart.

6. Reinstall avast run fine sometime but had lead to itunes stop running without msvcr80.dll.

7. Reformat my c drive and resinstall win 7. Without touching system reserved and 2 partition.

8. Successfully reinstall but my d drive have switch position with e drive. Meaning the name of drive change drive letter. As well as the files inside. Will this cause issue?

9. But windows 7 update have failed updates. Leading to auto chkdsk fixing some missing and replacing them. Next day windows 7 failed to launch with bad_msconfig on bsod.

10. Reformat and Reinstall windows 7 on c drive again. This time all windows 7 update install smoothly.

But i still have single loud beep at post screen leading to lag windows 7 as well as startup repair when i restart computer sometime.

Now startup repair occur when i power on. Which say cannot fix have to shutdown. Repower on it back to windows 7 normally.

11. new problem arrive where it start chkdsk automatically where it say $I30 index message.

12. i cannot complete chkdsk when i schedule it to run. It say c drive volume is clean but freeze at that point. However other partition drive chkdsk manage to complete. Just issue with c drive.

My System SpecsSystem Spec
18 Nov 2012   #2


If you think your HDD is bad or going bad run this diagnostic : http://
My System SpecsSystem Spec
19 Nov 2012   #3


Install CrystalDiskInfo - Software now to read the SMART data on your HD from desktop.

I'd also run the HD Diagnostic for your brand HD. Then you need to get a successful Disk Check
even if you have to run Option Two from the System Recovery Options Command Line.

Then test RAM - Test with Memtest86+ for 5-6 passes or overnight to stress it.

If you strayed far from the Best Practices given in Clean Reinstall - Factory OEM Windows 7 (same for retail) then I'd do it over following the steps closely to get it perfect, but this time wipe the HD first with Diskpart Clean Command to get a clean slate overwriting any possible corrupt boot code.
My System SpecsSystem Spec

19 Nov 2012   #4

Windows 7 Home Premium 64bit

ran seagate tool on windows 7. short dst and long generic test failed. The remaining tests passed.

Will try dos test.
My System SpecsSystem Spec
19 Nov 2012   #5

Windows 7 Home Premium 64bit

Also i ran seatool on dos it failed short test and long test. Long test with more than 70 errors and bad sectors.

Is the tools reliable?

I had auto chkdsk for c drive and it mention

sorting index $i30 in 21584 amd 94332.

Follow by replacing alot filesname in 21584 and 94332. Restart and boot win 7 normally. But sometime follow by startup repair after chkdsk.

HDD going to die?
My System SpecsSystem Spec
19 Nov 2012   #6


I would replace it.
My System SpecsSystem Spec
21 Nov 2012   #7

Windows 7 Home Premium 64bit

Power computer after starting window screen auto restart and go into option screen to use Startup Repair.

Startup Repair cannot repair this computer automatically

Problem signature:
Problem Event Name: StartupRepairOffline

Problem Signature 01: 6.1.7600.16385
03: unknown
04: 2
05: AutoFailover
06: 1
07: NoRootCause
OS Version: 6.1.7600.
Locale ID: 1033

Click nosend, prompt shutdown with finish button.

Power on computer it run ok now.
My System SpecsSystem Spec
21 Nov 2012   #8


If it fails Seatools long CD test and can't run ChkDsk, then unless Seatools CD long test can report repairs made to clear the errors and Disk Check can run, you are running with a failing HD.
My System SpecsSystem Spec

 Startup Repair Bug, CHKDSK on boot and occasionally beep at post?

Thread Tools

Similar help and support threads
Thread Forum
Startup repair wont boot up
I was installing a system image in windows7 and my pc froze up and I needed to restart but after that it just said operating system is missing. I can not get my PC to boot a startup repair disk made from my other pc running windows 7..... on a new dvd 16xrecordable. The PC just says No Boot Device...
Installation & Setup
Corrupt partition, can't boot, Startup Repair loop, tried chkdsk
Recently, my computer had a few files that were "corrupted and unreadable" and upon restarting or powering on the PC, it would run chkdsk before booting to Windows. It failed a few times, but once I luckily managed to get it to boot after running Startup Repair for the first time. This was when I...
BSOD Help and Support
PC Won't boot, POST beep is OK!
I went out today and came back and my PC was stuck at the "Last known good configuration screen". I tried to boot into windows using that setting and nothing happened, my PC Just restarted and the cycle began back to that screen again. I restarted, POST gave me no errors but i was still unable...
BSOD Help and Support
Windows 7 Won't Boot (Can't even boot startup repair)
Hardware Information (This is from memory and may not be completely accurate): The computer model is emachines The processor is a dual core Intel Pentium The graphics card is NVIDIA (Can't remember the model.) 4GB of RAM installed Software Information (Also from memory, but this is likely...
General Discussion
Cant boot into windows, startup repair cant fix.
Here are the problem details of startup repair. Problem event name: StartupRepairOffline Problem signature 01: 6.1.7600.16385 Problem signature 02: 6.1.7600.16385 Problem signature 03: unknown Problem signature 04: 21201080 Problem signature 05: AutoFailover Problem signature 06: 7...
BSOD Help and Support
Launches startup repair on every boot
Hi people, found your forum via Google. I have an issue with Windows 7 Professional. It is a new install (2 days old) and every time it is booted it launches into start up repair. Is there anyway I can completely disable it so this doesnt happen? After it goes through it boots correctly but...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:10.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App