Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 on Samsung NC10

30 Sep 2009   #1
shakoor1

vista
 
 
Windows 7 on Samsung NC10

Iíve got a Samsung NC10 netbook and how could I install Windows 7 home premium on it that I have pre ordered


My System SpecsSystem Spec
.
30 Sep 2009   #2
Tews

64-bit Windows 8.1 Pro
 
 

First, this machine is a poor candidate for windows 7. The lack of an optical drive means that you will need an external usb drive for installation. The advertised video ram is only 64mb, so you will not be able to run the aero themes. The factory installed memory is only 1gb and that is not enough IMO to run any version of Windows 7. While you may be able to get it installed and running, the experience will be less than satisfying.
My System SpecsSystem Spec
30 Sep 2009   #3
jezza101

Windows XP
 
 

For more information about installing Win 7 on the Samsung NC10 check out the linked page.

Many people have installed the RC/beta and run it just fine, many even prefer it to running XP. But don't take my word for it....

Twitter / Adam Chapman: Win 7 running peachily on ...
Twitter / marleyuk: @MSSpringboard Just bought ...
http://twitter.com/ceduardo/status/1925623332

etc

Also, plenty of NC10 Win7 info at that link too.

Netbooks are much more capable than many think - I run Win 7 in a Virtual Machine on my NC10 !
Good luck
My System SpecsSystem Spec
.

30 Sep 2009   #4
chessdragon136

Windows 7
 
 

Yeah windows 7 runs extremely well on an NC10.

However i would reccomend buying a 2GB memory stick, and then in the bios you can unhide the hidden settings (see below) and you can assign 128mb to the graphics, which makes things a bit smoother for Aero (which works fine!):

"Press F2 during boot up to enter the NC10 BIOS page, it is then possible to unlock further advanced options. Press (Fn + F11) release the keys then press (Fn + F11). Scroll across using the arrow key and the new tab 'Intel' will appear. These are advanced options and should be adjusted by experts. Do not experiment with this. "
My System SpecsSystem Spec
Reply

 Windows 7 on Samsung NC10




Thread Tools




Similar help and support threads
Thread Forum
Samsung Series 7 software on non-Samsung PC.
After installing Samsung Touch Supporter on my non-samsung PC,I get this: "This Program only runs on a Samsung PC. Program will terminate." I try to use some of the software that came with the Samsung Series 7 PC. I will not let me open the program. I have an Archos 9 PC and would like to...
Software
Should i update to windows 7 from xp on notebook samsung NP-NC10?
My personal opinion is no its not powerfull enough, i know the bare min requirements it meets dont know about the graphics though, it on XP now has no dvd drive so would have to make a bootable usb drive, so what is peoples opinions
General Discussion
Windows 7 Samsung NC10
I have installed Win 7 on my NC10. I used the drivers from Samsungs website. Everything seems fine except that in device manager I have showing a missing driver which comes under Other-Video Controller. I have tried everything I can but without success. Has anyone any idea what this could be please.
Drivers
NC10 ~ Setup was unable to create...
Hi, I've had windows 7 test build 7077 on my NC10 for ages and I've finally got around to upgrading it. I made a usb bootable flash drive with win7 ultimate on it, boot into the setup. Delete the partiton, try to install.. but I get the lovely "Setup was unable to create a new system partition...
Installation & Setup
Samsung SM 2333SW vs Samsung P2250N
I am buying a new monitor. Probably one of these two in title! Which monitor is better? I need some suggestions... thanks..
Hardware & Devices
NC10 wlan random drops
Hi i'm looking from a little help, after some searching I have found a couple of articles talking about the atheros 5006 adapter failing and if im not mistake there are a few solutions but I have found nothing talking about the 5007 adapter. Can anyone suggest any potential solution and is...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:13.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App