Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Accidental Used Diskpart - Clear Command. How To Revert

27 Dec 2012   #51
gregrocker
Microsoft MVP

 

I don't know if those would interfere or confuse PW Wizard. SIW2 might know for sure. Work with Kaktussoft to try to recover the MFT.


My System SpecsSystem Spec
.
27 Dec 2012   #52
Pedroc1999

Windows 7 Ultimate x86
 
 

So what do you think kakktussof
My System SpecsSystem Spec
27 Dec 2012   #53
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

My System SpecsSystem Spec
.

27 Dec 2012   #54
Pedroc1999

Windows 7 Ultimate x86
 
 

I will try tomorow. If is 00:30 here in wales so i am in bed with my phone
My System SpecsSystem Spec
27 Dec 2012   #55
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

If you are mostly interested in recovering pictures, try ZAR.

The image recovery part is free. It works to recover from HD as well as memory card.

Digital image recovery - ZAR usage demo
My System SpecsSystem Spec
28 Dec 2012   #56
Pedroc1999

Windows 7 Ultimate x86
 
 

So im running zar and i dont knlw what to interprate. It is at 1% and all i can see is data fragments and 2 file structers which are not at the start they are about 6 blocks down
My System SpecsSystem Spec
28 Dec 2012   #57
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Digital image recovery - ZAR usage demo
You are in step 3 now?
tutorial is very straightforward

Please post a screenshot
My System SpecsSystem Spec
28 Dec 2012   #58
Pedroc1999

Windows 7 Ultimate x86
 
 

I had to restart the zar because my hdd got unplugged when i was plugging something into my htpc...

I will post a screenshot later as i am curremtly using synergy and i havnt got internet set up on the htpc
My System SpecsSystem Spec
28 Dec 2012   #59
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by pedroc1999 View Post
I had to restart the zar because my hdd got unplugged when i was plugging something into my htpc...

I will post a screenshot later as i am curremtly using synergy and i havnt got internet set up on the htpc
Why you're doing other things that interfere with ZAR? It's a process that takes hours! Do you have enough free space on internal disk to restore the recovered pictures?

Post a screenshot when ZAR is trying to recover for about half an hour. Also write down when recovery starts and when it's at 5% percent. Then you can predict when it will finish.
My System SpecsSystem Spec
28 Dec 2012   #60
Pedroc1999

Windows 7 Ultimate x86
 
 

Yes.. I have 350 gb free.It has been running for 26 mins and is at 3%. I will keep an eye on it
My System SpecsSystem Spec
Reply

 Accidental Used Diskpart - Clear Command. How To Revert




Thread Tools




Similar help and support threads
Thread Forum
Data Recovery after using diskpart clean command
Hello! I wanted to install a fresh windows and here's what happened in details: 1. I couldn't install windows 7 on C Drive because it was a GPT partition (the error message stated that). 2. I followd a tutorial and i used diskpart but i selected partition 1 and then issued the clean command. I...
Backup and Restore
Recover data from an accidental diskpart / clean command
Hey folks, What I did: Within CMD>diskpart>Select disk, i ran the clean (not clean all) command on a different drive than intended, (the goal was to recover a partition of a USB thumb drive), and ended up cleaning an external data drive (3TB), and would love to find out that my data is not lost....
Backup and Restore
Used diskpart-clean command on sd card? Help
Hello all! Im in desperate need of some help!! Long story short, my micro SD card was in an adapter on my PC, working fine, and suddenly i got an error message, saying it needed to be reformatted. I STUPIDLY trusted a youtube video that brought me to command prompt-diskpart. From there i ended...
Music, Pictures & Video
Deleted HDD files using diskpart command
Hello In an attempt to create a windows 7 bootable USB I've deleted my HDD (it was late and in a hurry :cry:). I have 2 drives connected: 1'st is an SSD drive - for main windows, 2'nd is a 1TB HDD drive western digital splitted in two partitions. The commands i've runned are: diskpart, list...
Backup and Restore
Lost EVERYTHING by using 'diskpart - clear'. Help??
Hi guys, I am pretty sure I have lost everything and there is no way of getting back, but still I am reaching out to you all as a last resort. I am so depressed right now, I have lost so many important documents, along with pics and videos of my son. I know it's my own stupid fault though. ...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:00.
Twitter Facebook Google+