Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: reboot loop

08 Apr 2013   #1
sledgehkg

7 ult 64bit
 
 
reboot loop

Hi, I'm running win7 64 on a quad core with 8 gig of ram.
on booting my system the windows logo starts to animate, it gets to the point where the four colors are about to join together and then the system reboots. I've run repair, it told me it could not automatically repair startup. i've looked at the error log, it reads as follows:

Problem signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: BadDriver
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033



I've tried sfc /scannow
I've tried rebuilding the mbr and bcd



cannot get in to windows in safe mode.


I've reset the bios to defaults.
I've run a ram test.



anyone any ideas?


Cheers.


My System SpecsSystem Spec
.
08 Apr 2013   #2
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Hi sled

Note   Note
You will need a USB flash drive


Farbar Tool

Download Farbar Recovery Scan Tool from below on a non infected PC
For 32-bit (x86) systems download
Farbar Recovery Scan Tool and save it to a flash drive.
For 64-bit (x64) systems download
Farbar Recovery Scan Tool x64 and save it to a flash drive.

Plug the flashdrive into the infected PC.

Enter System Recovery Options.

To enter System Recovery Options from the Advanced Boot Options:
Restart the computer.
As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
Use the arrow keys to select the Repair your computer menu item.
Select US as the keyboard language settings, and then click Next.
Select the operating system you want to repair, and then click Next.
Select your user account an click Next.

To enter System Recovery Options by using Windows installation disc:
Insert the installation disc.
Restart your computer.
If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.
Click Repair your computer.
Select US as the keyboard language settings, and then click Next.
Select the operating system you want to repair, and then click Next.
Select your user account and click Next.

On the System Recovery Options menu you will get the following options:
Startup Repair

System Restore

Windows Complete PC Restore

Windows Memory Diagnostic Tool

Command Prompt

Select Command Prompt

In the command window type e:\frst.exe (for x64 bit version type e:\frst64) and press Enter
Note   Note
Replace letter e with the drive letter of your flash drive.

Tip   Tip
Type the commands below to see what your letter is for the USB drive and press ENTER after each command

Code:
Diskpart
List volume
The tool will start to run.
When the tool opens click Yes to disclaimer.
Press Scan button.
FRST will let you know when the scan is complete and has written the FRST.txt to file, close out this message, then type the following into the search box:
services.exe
Now press the Search button
When the search is complete, search.txt will also be written to your USB
Type exit and reboot the computer normally
Please copy and paste both logs in your reply.(FRST.txt and Search.txt)
My System SpecsSystem Spec
Reply

 reboot loop




Thread Tools




Similar help and support threads
Thread Forum
Reboot Loop
I have spent the last week trying all different solutions to try to fix my reboot loop issue. I get the Message that says "Preparing to configure Windows, Please do not turn off your computer" the screen goes black and it boots to that same message again and the cycle repeats. I have tried a repair...
Software
PC on a reboot loop after a BSOD!
My PC just had a BSOD, so I rebooted it. It booted up and then suddenly crashed and automatically start again. When it started, after the ASUS screen it prompted me to choose Safe Mode or to Start Normally. I chose Start Normally, and it started to boot. In the Starting Windows screen, when...
BSOD Help and Support
driver reboot loop
after installing the graphics driver for this tablet, windows recognizes the adapter and installs nessesary additional drivers. after it installs intel softbios thing it requess restart. after restart it goes through all the above steps again requesting reboot. whats goin on here and how do i fix...
Drivers
Reboot loop?
So I booted up my PC today and every single time it would get past the windows loading screen, a BSOD would flash on the screen for a split second and reboot. I tried booting into safe mode and that would not work either. The next step I figured would be to format and do a clean install, but...
General Discussion
Reboot loop
I downloaded the student version of W7. I'm running Vista business so I had to do a clean install which went fine, it went through the first two steps fine (I forget the names) and then says it needs to restart to finish. It restarts, goes to the new windows start up screen (which looks nice), that...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:58.
Twitter Facebook Google+