Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Windows 7 repair shows 0mb partition size

16 May 2013   #1

Windows 7 home Premium 64bit
Windows 7 repair shows 0mb partition size

I put a computer together a week ago and the first time I installed windows 7 and then installed the graphics/motherboard drivers it did not boot back up. It would say that windows failed to start (it wouldn't give me a reason) and then would go into attempt start-up repairs. I let this run a few times and this did not fix the problem. In the start-up repair screen (run from the CD) it has me select a windows installation but the only one listed is a Windows 7 installation with a partition size of 0 mb. I figured it was a driver issue so I reinstalled windows 7 and this time used drivers I downloaded from ASRock's website and only installed the LAN and graphics drivers and left everything else stock. When I went to reinstall windows the partitions showed up correctly at 260gb and 11gb. This appeared to work for about a week when suddenly the computer froze up, we restarted it, and then windows wouldn't boot up again and start-up repair came up. I reinstalled windows 7 again last night and did the same thing again although this time I let windows update run all night. When I work up this morning it was back to the same problem again.

Any suggestions for how I should start to investigate this would be very much appreciated!

Specs follow:
ASRock H61M/U3S3 LGA 1155 Intel H61 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard
CORSAIR 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 Desktop Memory Model CMV8GX3M2A1333C9 PNY Commercial Series VCGGT5201XPB-CG GeForce GT 520 (Fermi) 1GB 64-bit DDR3 PCI Express 2.0 x16 HDCP Ready Low Profile Video Card
Seagate Momentus 7200.4 ST250LT021 250GB 7200 RPM 16MB Cache 2.5" SATA 3.0Gb/s Notebook Hard Drive -Bare Drive
COOLER MASTER Elite 460 RS-460-PSAR-I3 460W ATX12V V2.31 Power Supply
Intel Pentium G870 Sandy Bridge 3.1GHz LGA 1155 65W Dual-Core Desktop Processor Intel HD Graphics BX80623G870

My System SpecsSystem Spec
17 May 2013   #2

Win 7 Pro 64-bit 7601

I'd check the HDD to see if it's faulty, download the disk check utility from the manufacturer's site (since you have all the specs it should be easy to find) and run it on that HDD from another PC.

Not a guarantee to find the culprit, but that's where I would start investigating given the kind of error and what you did already.
My System SpecsSystem Spec
18 May 2013   #3

Windows 7 Professional x64 (Domain Environment)

I would say the option is intead of doing system repair open cammnd promt and enter follwoing commands to check your hard drive for any errors etc. - chkdsk X: /f /r (Where X is your drive letter - more likely to be D: in Windows PE Environment)

Hope this helps
My System SpecsSystem Spec

18 May 2013   #4
Microsoft MVP


Once you've tested the HD and RAM as provided above and in Troubleshooting Steps for Windows 7, then if they are clean I'd follow the same steps to get a perfect Clean Reinstall - Factory OEM Windows 7.

In particular only use the drivers delivered by installer and then immediately running all rounds of Important and Optional Windows Updates after enabling Automatically get recommended drivers and updates for your hardware (Step 3).

However this time boot the installer into the System Recovery Options Command Line to run Diskpart Clean Command to clear the boot sector of all code which can interfere.
My System SpecsSystem Spec

 Windows 7 repair shows 0mb partition size

Thread Tools

Similar help and support threads
Thread Forum
Volume size and partition size inconsistency
Win2008R2 x64 (I think it's quite compatible to Win 7). I'm trying to resize my disk C: to the whole partition , but when I run Disk Management (via run as admin) , it shows me the following weird picture: When I call "Shrink volume" command from the local menu, it hangs...
Performance & Maintenance
What is the recommended partition size for Windows 7 Ultimate?
I want to repartition my HDD which has a capacity of approximately 80 GB, but it is shown as 74.5 GB in windows disk management app. I have split the hard drive into 3 partitions of equal size each of 24.8 GB and installed windows 7 ultimate (32-bit) on one partition, and the other two are for my...
Installation & Setup
Partition Wizard shows 98% Empty partition as 100% Full
I am trying to reduce the partition of D drive on a laptop in order to increase the size of the C drive. In Win 7 Computer Management the D Drive is shown as 98% empty. I booted from the Partition Wizard CD I made and found that in PW06 the drive was shown as 100% full and was unable to reduce the...
General Discussion
Change partition size of Ubuntu in Windows 7
i have Ubuntu dual booted with windows 7 32 bit, i am running out of space on my hard drive and am not using the 100 gigabytes i partitioned of for Ubuntu, i was hoping that someone might know how to change the partition size as i cant find out how to do it. Thanks very much
General Discussion
Re-size C partition in Windows 7
Hello, Is there any built-in tool to re-size the C partition because it runs out of space with Windows 7? I installed PartitionMagic but it doesnt work on Windows Vista/XP so any software or an idea to do that? Thanks

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:05.
Twitter Facebook Google+