Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: after doing scf/scannow in cmd following msg is displaying

28 Jul 2013   #1

Windows 7 ultimate 32 bit
after doing scf/scannow in cmd following msg is displaying

after doing scf/scannow in cmd following msg is displaying

verification 100% complete.
Windows resource protection found corrupt files but was unable to fix some of them
Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example

My System SpecsSystem Spec
28 Jul 2013   #2

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64 +Linux_VMs +Chromium_VM

You need to run the scan up to 3 times with a reboot after each scan.
SFC /SCANNOW Command - System File Checker

You may want to save the CBS.log after each run so you know what each run found, if asked.
My System SpecsSystem Spec
28 Jul 2013   #3

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1

This post should be in your other thread where you were advised to use the sfc /scannow. To start two threads on the same topic is confusing!
My System SpecsSystem Spec


 after doing scf/scannow in cmd following msg is displaying

Thread Tools

Similar help and support threads
Thread Forum
Battery Displaying 0%
Hi Guys! Recently, my laptop has stopped working without the power cable. If the power cable is removed it turns off. The battery is properly connected and Windows 7 says that there is one installed. When this first happened my battery level was at 7% (Critical). Since then, every couple of days...
Hardware & Devices
Need help displaying 3rd, 4th, 5th, 6th timezones
sat·is·fice ˈsatisˌfīs/ verb accept an available option as satisfactory. "it talks about telling you not to just satisfice but to always look for the best" "Outlook will almost satisfice most people" OK, two time zones was great around the invention of the telephone, but I work with...
Microsoft Office
Date Not Displaying
Not sure if this is the right forum, but I couldn't think of where else to post it. Anyway, yesterday the date in the system tray randomly stopped appearing. It still shows the time, just not the date. I didn't change any settings or anything like that, I just remember looking down and noticing...
General Discussion
RAM displaying different CAS in each slot?
Hello I am currently running my RAM sticks through a Memtest86 . Right now I am testing them individually in each slot. One thing I noticed was that in Slot 1 the first test CAS read 6-6-6-20 and on Slot 3 the current test I'm running, the CAS reads 9-9-9-24 which is what Memtest86 will read if I...
Hardware & Devices
monitor not displaying
monitor not showing anything after the first boot , but my computer runs and i can hear the windows startup sound but after restarting my computer it works fine , also sometimes my monitor shows everthing but on my desktop icons are big. also im not sure if its the correct place to make this...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:27.
Twitter Facebook Google+