I have some serious problem with my desktop display

Page 1 of 2 12 LastLast

  1. Posts : 27
    Windows 7 64Bit
       #1

    I have some serious problem with my desktop display


    I have a desktop computer with System Model DG31PR , Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2533 Mhz, 2 Core(s), 2 Logical Processor(s) I was having 4GB ram on it for some reason the second slot is not working. so now its running with only 2 GB and the display pixelates when I ebter into Safemode its fine or else I am not able to see anything on the scree it only pixelates with grain mixed lines completely. I was having this issue before but ti was at time.. I checked with Monitor but its no fault since it works in safemode.

    Steps Done :

    1 . Installed the drivers which was downloaded from intel site
    2. Tied to disable the services and rest dunno whgat to do please help meeee
      My Computer


  2. Posts : 1,618
    Win7 Home Premium x64 W10Pro&Home
       #2

    Go to HP and download the driver for your graphics to the desktop. in device manager, remove the graphics adapter, then reboot. You will probably be given a generic driver on reinstall, check and see if the driver matches the downloaded driver from HP, the original driver may be the best. If you are in High Performance mode in power settings and can only see one slot of ram, try shutting down and reseating the ram.
      My Computer


  3. Posts : 27
    Windows 7 64Bit
    Thread Starter
       #3

    My Desktop is not a HOP assembled still will it work??
      My Computer


  4. Posts : 1,618
    Win7 Home Premium x64 W10Pro&Home
       #4

    Update your System Specs, which state you are running an HP Envy...
      My Computer


  5. Posts : 27
    Windows 7 64Bit
    Thread Starter
       #5

    no actually HP envy is my laptop and I have another desktop which was assembled the specs is

    ystem Model DG31PR , Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2533 Mhz, 2 Core(s), 2 Logical Processor(s)

    MOnitor is Viewsonic...
      My Computer


  6. Posts : 27
    Windows 7 64Bit
    Thread Starter
       #6

    ur reply worked partially when I disable the drivers under display adapter its working fine with windows 7 but if I install it then again it gets pixelated
      My Computer


  7. Posts : 27
    Windows 7 64Bit
    Thread Starter
       #7

    anyother solution?????
      My Computer


  8. Posts : 1,618
    Win7 Home Premium x64 W10Pro&Home
       #8

    It is rather obvious that the wrong driver is installed... do not just disable the driver, you should remove the device and allow it to find the right driver when it reinstalls on boot...
      My Computer


  9. Posts : 27
    Windows 7 64Bit
    Thread Starter
       #9

    no its not doing that
      My Computer

  10.    #10

    Uninstall the driver including its software in Device Manager.

    Enable Automatically deliver drivers via Windows Update (Step 3) and run all rounds of Important and Optional Windows Update to completion, both for the driver(s) needed and any performance updates which might be needed to smooth their performance.

    If this doesn't provide a suitable driver, then import the latest from the HP support Downloads webpage for your model.

    Are you still running the HP factory preinstalled WIn7 which is the worst possible install of WIn7 one can have? If so do what most tech enthusiasts do and Clean Reinstall - Factory OEM Windows 7 which provides everything needed to get and keep a perfect install.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:51.
Find Us