Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: verifying dmi pool data before boot

23 Oct 2009   #1
Milite777

Vista + Seven
 
 
verifying dmi pool data before boot

another problem
now when I switch on the pc, after the white screen and before the boot appear a black screen that say verifying dmi pool data and it stop to this.
For the first time I change the boot priority and boot from the another hard disk and it start. But now when I Boot from any hard disk the message is always the same...
I can boot without any problem from dvd drive or another device. Any solution?


My System SpecsSystem Spec
.
23 Oct 2009   #2
peck1234

Windows 7 Ultimate (64-bit) Build 7600 RTM
 
 

the hardrive your booting from needs to have an OS installed on it... if theres not you will be stuck on the verifying dmi pool data screen...
My System SpecsSystem Spec
23 Oct 2009   #3
torrentg

7600.20510 x86
 
 

That's not really correct. The drive you boot from only needs to have the boot files such as bootmgr file and boot folder. Of course, bcd file must be correct too and Windows must be intact on the same or other drive.

As I said in the other thread, a startup repair is the thing to try here. If not, clean install.

I'm sure there's probably other things to try or that may fix. You'll probably save time just clean installing instead of going through numerous troubleshooting and repair steps with probably no good result.

Good luck.
My System SpecsSystem Spec
.

23 Oct 2009   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Milite777 View Post
another problem
now when I switch on the pc, after the white screen and before the boot appear a black screen that say verifying dmi pool data and it stop to this.
For the first time I change the boot priority and boot from the another hard disk and it start. But now when I Boot from any hard disk the message is always the same...
I can boot without any problem from dvd drive or another device. Any solution?
that error message is BIOS related. It means the data is corrupted. Upgrade the bios and read about it here Computer Hangs at"Verifying DMI Pool Data"

hope this helps

Ken
My System SpecsSystem Spec
23 Oct 2009   #5
Milite777

Vista + Seven
 
 

I try to do a start up repair but I haven't any result.
I prefer to try any other way before do a clean installation.
Thanks for your answer
zigzag i try soon
My System SpecsSystem Spec
23 Oct 2009   #6
Milite777

Vista + Seven
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
that error message is BIOS related. It means the data is corrupted. Upgrade the bios and read about it here Computer Hangs at"Verifying DMI Pool Data"

hope this helps

Ken
zigzag I try to update the bios with the procedure describe in some online tutorial but all page say that I need to enter in my pc and use windows... Is this procedure essential?

edit: I resolve with a clean installation of seven, thanks to all for help
My System SpecsSystem Spec
Reply

 verifying dmi pool data before boot




Thread Tools




Similar help and support threads
Thread Forum
Cannot boot Windows USB, stuck on "Verifying DMI Pool Data..."
I've created a bootable Windows 7 usb using Rufus. But when I go to boot it (by changing First Boot Device in BIOS to Removable), it just gets stuck at "Verifying DMI Pool Data...". What's wrong? I even checked the usb drive using MobaLiveCD, and it works fine.
Hardware & Devices
Trying to boot with new HD, stuck at "verifying dmi pool data"
This is my first time trying to fix a computer, so please forgive my ignorance. I recently changed the motherboard and hard drive on my hp computer. Before I did that, I was able to create a windows 7 recovery cd (before the old HD died entirely), and I also have a system image on an external...
Hardware & Devices
Boot failure - Hangs at "Verifying DMI pool data"
Hello all, I'm new & having a spot of trouble so I decided to ask for some help here after seeing many other similar issues resolved :) The current situation: I have 1 partition containing my windows 7 install, but it won't even get to the stage where I can select (e.g.) safe mode because it...
Hardware & Devices
Verifying DMI Pool Data?
I got a new desktop PC. It works fine, but on each startup it gives me the line "Verifying DMI Pool Data". It seems to be part of the normal booting process, but my other PC never does that, and when I researched it on the web I read that it might be a serious error. Now I'm confused. The specs...
General Discussion
verifying dmi pool data before boot
another problem now when I switch on the pc, after the white screen and before the boot appear a black screen that say verifying dmi pool data and it stop to this. For the first time I change the boot priority and boot from the another hard disk and it start. But now when I Boot from any hard...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:09.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App