Might Now why my computer crashes while Using Prime!

put the Ram voltage to 1.5 instead of auto.. wich.. Sure was set to 1.5v
Also i changed the Ram to exact 1600Mhz. Instead of auto wich kept it at 1602Mhz and stuff..
After about 10 minutes one core died
After 30min the program still ran fine exept for the one crahsed core..

Temperature got a highest peak of 45c wich lasted for a fraction of a second. Otherwise both speedfan and core temp said it was at 41c all the time..
Highest fan rpm was 990Rpm

What did you set the RAM timings to?

Mellon Head said:

What did you set the RAM timings to?

Unchanged. Trying every little step by step..

Also.. Cpu Vcore should i set it to 0.075v ( lowest possible )
instead of auto?

sisrace said:

Mellon Head said:

What did you set the RAM timings to?

Unchanged. Trying every little step by step..

Also.. Cpu Vcore should i set it to 0.075v ( lowest possible )
instead of auto?

The timings might be unchanged, but what are they set to? What are the numbers?

Don't touch the VCore yet. Let's work on the RAM first.

I said i didnt touch the timings they are still at 9-9-9-24

OK, good. Now try setting the timings to 9-9-9-28 and run Prime again.

Mellon Head said:

OK, good. Now try setting the timings to 9-9-9-28 and run Prime again.

ok sir. I shall do what you said when im home from school

Did you try it? Did it help?

i tryed it 9-9-9-25
It could run prime for a lot longer but it did the same thing. Should i go for 10-10-10-something? now

All right, try for 10-10-10-30 and see what happens. We'll start high and move down.