Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer will not boot after cmos battery.

30 Apr 2014   #21
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

What's on the cd that came with the ssd ?
If it's not a bootable cd and you can't start Windows I don't see how it could help.

Are you sure the SSD is a bootable device in BIOS and prioritized before the HD ?

You might try using a bootable Partition Wizard CD to see what is on the SSD.
Greg's tutorial has instructions for this at #9
Troubleshooting Windows 7 Failure to Boot


My System SpecsSystem Spec
.
30 Apr 2014   #22
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Yep another option is my ditty

BOOTABLEUBUNTU

Makea bootable Ubuntu disk http://www.ubuntu.com/download

Setthe BIOS to boot from the optical when the machine boots it will show you ascreen with TRY or INSTALL > select TRY

Whenit is finished - it takes very little time you will get a screen like in thepic .

Openthe drive you want > User and dig down until you get to the data / settingsyou may be able to copy / paste the material you want to an external source orother installed drive doing this.

Iam not sure if it will but I have recovered tons of data etc using this methodboth on "dead" or just plain drives that you cannot get data fromusing Windows.


Attached Thumbnails
Computer will not boot after  cmos battery.-ubutux.png  
My System SpecsSystem Spec
Reply

 Computer will not boot after cmos battery.




Thread Tools




Similar help and support threads
Thread Forum
computer won't boot after changing RAM speed in Bios (tried CMOS rest)
I changed my RAM speed in bios from 2133 to 3200 using the XMP settings. At first it didn't save when I tried to restart it so I changed it again. Then when I tried to restart the computer it wouldn't boot up. The monitors, mouse and keyboard won't turn on but the LED's and fan in the computer are...
Hardware & Devices
Can't boot or repair Win 7 after replacing CMOS battery
I apologize for the length of my post, but I have gone thru several steps in trying to solve my problem. I turned my Win-7 PC on and got the error message "CMOS/GPNU checksum bad". Research suggested one cause might be the CMOS battery (#2032), which I replaced. I entered BIOS and everything...
Hardware & Devices
Battery Meter shows CMOS battery not charging
I have just replaced my CMOS/BIOS battery today, as , I have faced some critical problem regarding regular BIOS date/time reset after system shutdown. But I want to know how do i recognize, that my new batter is totally ok or functional. Battery Meter gadget shows that "battery Not charging"...
Hardware & Devices
computer would not restart (bad CMOS battery?)
I walked away from my computer for a couple minutes. Came back and the displays were off, computer was still on. Held the power button to shut it off. Shut off everything (displays, surge protector, switch on PSU) for about ten sceonds. Turn the computer back on and the BIOS screen came up...
General Discussion
cmos battery replacement
Tried to replace my cmos battery with one i bought from Asda ( lithium cr2032 3v) Maybe i am doing something wrong ;but restarting the pc gave a beeping sound, so i replaced the original battery and the pc started ok except the date and time seemed to have reverted back to the date it was...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:09.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App