Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: no display at startup

29 Oct 2009   #1
wizzard81

Windows 7
 
 
no display at startup

Hello,

I have an intel dx58so motherboard, intel i7 950 cpu, antec truepower 1000w supply, 6gb ddr3 memory.

When i boot it takes 15-20 seconds before i see something on the display and when the display turns on.

When i reboot i don't have this problem at all.

I tried with 3 different graphic cards and problem stays.

Anyone an idea what the problem could be ?

Kind Regards,
Kris Saelen


My System SpecsSystem Spec
.
29 Oct 2009   #2
Minotar

Windows 7 Ultimate 64bit
 
 

Have you tried start up repair in the install menu on the installation disc?
My System SpecsSystem Spec
29 Oct 2009   #3
wizzard81

Windows 7
 
 

well it happens before i'm on windows. It's when i startup the computer it takes 15-20 seconds before my display turns on.
My System SpecsSystem Spec
.

29 Oct 2009   #4
Minotar

Windows 7 Ultimate 64bit
 
 

I mean from the installation disc for Win7,after you select languages etc you have an option on the bottom left to "Repair Computer" (under Install Now )

Click the top option with the Win7 OS and run start-up repair 3 times as it can be buggy.
Dan
My System SpecsSystem Spec
30 Oct 2009   #5
wizzard81

Windows 7
 
 

I will give this a try thanks !
My System SpecsSystem Spec
Reply

 no display at startup




Thread Tools




Similar help and support threads
Thread Forum
My tv won't display picture after startup using VGA
I have a slightly older Maxent 42" plasma which I am trying to use as my monitor. I have gotten it to work with previous computers but this one is giving me trouble. It will display the bootup screens no problem but once windows goes to display the desktop then I lose signal and the screen goes...
Graphic Cards
How to display IPv4 address at Windows startup ?
I am on a work computer with dynamic IP address (Ipv4), which usually changes when I restart it. Since I sometimes need to use this PC through remote desktop connection at home I like to keep its IP address handy. But I sometimes forget to check the IP at restart, so is there a batch file or...
General Discussion
Dual display 1 not displaying except on startup; both display in Linux
Windows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at...
Graphic Cards
No display on system startup
I'ts been going on for a while now couldn't say exactly how long (1 year+?)... But for the most part when I turn my computer on nothing will be displayed (no signal either) and if it gets to the windows log in screen (can tell based on the sound) I can unplug the DVI attached to my 4890 and plug...
General Discussion
Media Center Startup without Desktop Display
When I turn on my HTPC it displays the Windows 7 Desktop for a bit before being able to open Media Center. Is there a way to have Windows 7 not display the Desktop if it knows Media Center will be opening thereafter?
Media Center
Display on startup
Whenever the laptop is switched on the display is in potrait! Pressing F1 gets it back to normal but anyone know how to get rid of this default setting?
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:49.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App