![]() |
|
28 Aug 2014 | #1 |
|
Acer laptop, uefi, no bootable devices found
So, got a new laptop, and it started to rain in problems :
1) uefi - what kind of crap is this ?? it cannot detect anything - i have ssd, i have pluged bootable win7 installation usb flash, but it just gives "no bootable device found". Had to turn off uefi and enable legacy mode. Is uefi usable only with windows 8+ ? |
My System Specs![]() |
. |
|
28 Aug 2014 | #2 |
|
This is the benefits of UEFI:
|
My System Specs![]() |
28 Aug 2014 | #3 |
![]() |
Quote:
i have pluged bootable Windows 7 installation usb flash,
|
My System Specs![]() |
. |
|
28 Aug 2014 | #4 |
|
But i have pluged my flash into usb 2.0 port, or uefi doesnt support that too ? ...
|
My System Specs![]() |
28 Aug 2014 | #5 |
![]() |
Have you reset the UEFI/BIOS to suit Windows 7 x64?
Downgrade Windows 8 to Windows 7 On some Acer, Gateway, P. Bell, Windows 7 x64 will not install in UEFI mode. Windows 8 Desktops - How to Disable Secure Boot - YouTube Enabling the boot device menu ![]() On most Acer systems, you can use the F12 key on boot to select the drive or network from which loading the operating system. In case the F12 option does not work, you may need to enable this function.
SOLUTION Enabling the F12 function: 1.Power on the system. As soon as the first logo screen appears, immediately press the F2 key, or the DEL key if you have a desktop, to enter the BIOS. 2.Press the right arrow key to select Main. 3.Use the arrow keys to navigate to F12 Boot Menu, and press ENTER. 4.Select Enabled, and press ENTER. 5.Press the F10 key to save changes and restart the system. How to Enable or Disable Secure Boot ![]() This article only applies to: Windows 8 Desktops
Bootable media from previous versions of Windows may not be recognized in Windows 8. You can change the Secure Boot setting and it should recognize the bootable device. Use the following steps to change Secure Boot: 1.Completely shut down your computer. 2.Power on the system. As soon as the first logo screen appears, immediately press Delete to enter the BIOS. 3.Use the right arrow key to select Authentication. 4.With Secure Boot highlighted, press Enter and then the down arrow to select Disabled. 5.Use the right arrow key to select Boot Options. 6.With Launch CSM highlighted, press Enter and use the down arrow to select Always. 7.Press Enter. 8.Press the F10 key to save changes and restart the system |
My System Specs![]() |
28 Aug 2014 | #6 |
|
Yeah, with uefi, boot menu is empty, and the only option to boot something is to disable uefi.
|
My System Specs![]() |
28 Aug 2014 | #7 |
|
|
My System Specs![]() |
28 Aug 2014 | #8 |
|
Yes, it works, i made it with windows 7 dvd/usb tool.
|
My System Specs![]() |
28 Aug 2014 | #9 |
|
okay try to disable the UEFI mode as you suggested install windows then enable it again.
|
My System Specs![]() |
28 Aug 2014 | #10 |
![]() |
The Windows USB Tool will not make a UEFI bootable USB drive.
Using a USB Pendrive on a PC with a uEFI BIOS. USB Pendrive need to be formated to FAT32 as in UEFI Bootable USB Flash Drive - Create in Windows Take note of Step 11 for Windows 7. Also you will need to use a USB 2.0 port, as there are no USB 3.0 drivers in Windows 7. |
My System Specs![]() |
![]() |
Thread Tools | |
Similar help and support threads | ||||
Thread | Forum | |||
Reinstallation causing No bootable device, Acer Laptop I have just reinstalled the OS on 2 of my computers but am having a very difficult time with my old acer laptop. I have already read many guides and spent many hours trying to resolve this. I really don't know much and should have taken some notes before but felt over confident. There doesn't... |
Installation & Setup | |||
How to make windows 7 dvd SL (4.7gb) uefi bootable Hello, I have made a windows 7 image with the versions I want in it and it fits on a sl 4.7 dvd. All I did was take the install.wim out of the original genuine windows 7 ultimate iso and modify it and put it back in it with daemon tools then burned it to a dvd SL. The problem is that I am not... |
Installation & Setup | |||
Install hangs up on ACER windows 8 UEFI laptop Original drive went bad. No backups or restore available Originally an windows 8 machine and went to 10. Trying to install windows 7 pro 64 bit via DVD so I can get back to 10 1. In UEFI mode it will not get past the windows logo 2. in legacy mode I can get to the disk format and selection... |
Installation & Setup | |||
Acer Laptop, Error: "No Bootable Device" After installing OEM Win7 Hi, I was asked by someone to install Windows 7 on their Acer Aspire E1-570 running windows 8.1. I have since formatted the drive and installed Windows 7, but now I get an error stating the above, No Bootable Device, Hit Any Key. I think I'll need to reinstall whatever partitions etc. Acer... |
Installation & Setup | |||
Hard Drive Disk is not detected in laptop - No bootable Device Found Hi, My friend's laptop (Acer Aspire One 722 - Windows 7 x64) has been shut down after opening an email and Windows never started up again. When you attempt to start up the windows, it stays the black screen and says "No bootable Device Found"! 1- I inserted Windows Live Disk and loaded it... |
Hardware & Devices |
Our Sites |
Site Links |
About Us |
Find Us |
Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd All times are GMT -5. The time now is 08:51. |
![]() ![]() ![]() ![]() ![]() |