Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: my pc can not boot and problem of "Winload.exe"

21 Jan 2015   #1
sindybel

windows ultimate x 32bits
 
 
my pc can not boot and problem of "Winload.exe"

Hello,
My pc "acer" has a big problem lately, so I tried to repair it using a Windows CD 7. The problem instead of solving the first problem that was blocking the repair phase of the system, I am falling in another. Now, I can not boot my pc, I get a message of a lack or a damage of file "Winload.exe". I tried to tap the F8 but it does not work.
Will you help me solve this problem? I have very important documents in the PC and I can not format it.
Thank you in advance.


My System SpecsSystem Spec
.
21 Jan 2015   #2
ShoTTaS

Windows 7 Pro 32bit
 
 

you have an important documents then you will reformat it? try this repair tutorial by Brink: Repair Install
My System SpecsSystem Spec
22 Jan 2015   #3
gregrocker
Microsoft MVP

 

Work through the steps for Troubleshooting Windows 7 Failure to Start
which try everything that can be done to start the OS, leading up to if necessary rescuiing your files to run Acer eRecovery Using ALT - F10 or do the superior Clean Reinstall Windows 7
My System SpecsSystem Spec
.

22 Jan 2015   #4
sindybel

windows ultimate x 32bits
 
 

hello,
thank you for your reply.
the problem is that I can not boot the system, the first window I receive at startup of the system is a black Ekron indicating the lack of "File: \ windows \ system32 \ winload.exe"
so I can not demarager formatting with upgrading the system.
there are other ideas.
My System SpecsSystem Spec
22 Jan 2015   #5
gregrocker
Microsoft MVP

 

This is why boot disks are provided to disinfect and then try to repair the OS from boot, or if necessary rescue your files to run Recovery or Reinstall.

You do not need to boot into Windows to do these, as the disks can function on their own once you boot them: How to Boot A Computer from CD or DVD - YouTube

So ignore the error it gives and focus on booting disks to attempt repairs in Troubleshooting Windows 7 Failure to Start
My System SpecsSystem Spec
23 Jan 2015   #6
sindybel

windows ultimate x 32bits
 
 

Problem solved.
Thank you for your support.
My System SpecsSystem Spec
Reply

 my pc can not boot and problem of "Winload.exe"




Thread Tools




Similar help and support threads
Thread Forum
Changing windows boot drive sata config from "raid" to "ahci"
So I have an AMD A88X motherboard in my htpc. For a few reasons I want to change the bios config for the sata controller from RAID to AHCI. I followed the instructions in this article: https://support.microsoft.com/en-us/...the-boot-drive to have windows load the ahci driver, but now I can't...
Drivers
"Windows Loading Files" infinite loop, Can't Boot USB "disk error"
hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping pc's on - booting - then "Windows Loading Files" - restart it's infinite :cry: i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time...
General Discussion
Failed startup "Winload.exe" 0x0000428
My Pc recently has had a some Malware, So after removing it and it giving more problems I decided to re-format the system after backing up documents etc as I knew they were safe,The install went perfectly fine and everything was good, I started it up for the first time and did the usual, Installed...
BSOD Help and Support
"Select Proper Boot Device" now "NTLDR is missing"
Computer Specs: CPU: I5-2400 MB: Asus Pz868 Ram: Corsair 8GB Vengeance LP Using on board VIdeo For now Maxtor HD Sata WD Raptor Sata HP Lightscribe DVD-r Drive Sata Problem I was having once I completed my new build with old system parts was as listed in title. It started out as select...
BSOD Help and Support
Both "System reserved" and "C" partition cloned to external HDD: boot?
With EaseUS Backup Tool, I've cloned these two partitions ("System Reserved" and "C") to same-sized partitions on a external HDD ("X" and "Y"). Picture tells it concisely: How to make drives "X" and "Y" boot-able? In "Disk Management", I've noticed these partition labels missing: "X" (or...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:49.
Twitter Facebook Google+