Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: After BSOD Can't get past boot 000F4

03 Feb 2015   #1

Windows 7 Home
After BSOD Can't get past boot 000F4

Hi all, I got the dreaded bsod this morning and have tried everything in my limited Pc knowledge to fix it but I can't get past turning the Pc on.

I worked fine last night and even early this morning, but at some point the mains fuse went (not due to the Pc) . As i restarted, it went through some sort of process of sorting through the harddrive (not sure exactly what but it has 3 stages and checks through all the files).
Anyway fuse went again interrupting the process and since then have been stuck with the bsod.

I tried running all the diagnostic tools that I can understand, checked all hardware connections, tried a restore point but they have all disappeared. Since taking out the MoBo battery and replacing I also have the Asus bios on startup but usually goes after a few seconds.

ok here are some of the diagnostic results/info...


A process or thread crucial to system operation has unexpectedly exited or been terminated

Technical information:

Stop: 0x000000f4 (0x0000000000000003, 0xFFFFFA80099F2b30, 0xFFFFFA80099F2E10, 0xFFFFF80003597500)


Problem Event Name: startupRepairOffline
Problem Signature 1: 6.1.7600.16385
Problem Signature 2: 6.1.7600.16385
Problem Signature 3: unknown
Problem Signature 4: 21200635
Problem Signature 5: autoFailover
Problem Signature 6: 11
Problem Signature 7: corrupt volume
Os version: 6.1.7600.
Locale ID: 1033


It has "number of root causes = 1" under system disk Harddisk0,
However each section the error code is 0x0

Rootcause found = cannot determine the cause of the problem (earlier results said it could be driver update issue but now it says it doesnt know)

This really is as much as I can say right now. Huge thanks in advance for anyone who can help.

My System SpecsSystem Spec
03 Feb 2015   #2

Windows 7 Home

(Update) I tried running in safe mode and this didn't work either. Could it be hardware related or possibly an operating system problem?
My System SpecsSystem Spec

 After BSOD Can't get past boot 000F4

Thread Tools

Similar help and support threads
Thread Forum
Cant boot past bios, sees boot drive prio correctly
Hey guys, My PC was working correctly this morning and then when I came home from work and turned it on the machine doesnt load past the bios splash screen. Sometimes the one screen pops on after that says some info with the drives, ram etc but it turns black quickly with a little white line...
BSOD Help and Support
BSOD 000F4 and 0004C Kernal Data Inpage Error
Hi All I really hope you can help as I am completely at my wits end. I have a relatively new Dell XPS L502X laptop and the other week while watching a film it crashed for the first time with a BSOD and a Kernal Data Inpage Error message. It just froze on this screen and had to manually...
BSOD Help and Support
BSOD on boot up - can't get past Windows splash screen
PC was put to bed last night as per usual - no problems. In the morning, it was still powered up, supposedly in sleep mode, but would not wake. Pressed the rest button to reboot, but as soon as the windows 7 splash screen starts I get BSOD crash, and can't get any further past that. After...
BSOD Help and Support
windows7 wont boot past windows splash screen - will boot to safe mod
WIndows 7 premium home version on a lenovo laptop freezing at splash screen. I can boot into safe mode just fine. Whereby I have to run a system restore back to an older date but the issue still comes back up and this seems to be especially true when trying to wake it from sleep mode. beyond the...
BSOD Help and Support
Problem with BSOD and slow boot past BIOS.
Hi, A couple weeks ago I bought a new CPU cooler, which, the fan didn't work, but my system was able to still run safely without the fan working for short periods of time. As far as I can tell the CPU has suffered no damage. One boot up, it took along time to get past the initial boot up...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:35.
Twitter Facebook Google+