Random restarts without BSOD, Event Viewer Kernel Power 41 Task 63

Page 1 of 2 12 LastLast

  1. Posts : 9
    Windows 7 64 bit
       #1

    Random restarts without BSOD, Event Viewer Kernel Power 41 Task 63


    Hi guys,

    I have been having trouble with random restarts - they seem to happen more when I am playing video games (even ones that are very easy to run and don't place much stress on the GPU/CPU) however it also happens when I am watching stuff, just browsing the web, when the PC is idling and so on.

    It never shows me a bluescreen and it never leaves minidumps or any error logs that I am aware of, the only thing it shows is Kernel Power 41 Task Category 63 error in the "Event Viewer" program.

    My specs are -

    i7 4790k
    ASUS Gene VII z97 Motherboard
    16gb Corsair RAM (4x4gb)
    Nvidia 780
    Seasonic Platinum 1000w power supply
    250gb Samsung SSD

    I have a bit of time to really focus on this lately and try to finally fix the issue, so last night I was running memtest while I was asleep and found that my memory had lots (thousands) of errors on the Test 13 (Hammer Test) part of memtest.

    Today I individually tested each 4gb stick by itself in both the first slot AND the second slot of the motherboard, just running test 13 on memtest and every single test had errors.

    This RAM worked perfectly fine in my old computer for 3 years so I find it incredibly unlikely that all 4 sticks have decided to go bad at the same time, so I was thinking it must be the motherboard? But even then, that means that 2 memory slots are faulty at the same time.. this once again, seems very unlikely, does it not?

    I was then reading about Test 13 of memtest and a few people advised that it would be very unlikely for my test 13 memory errors to even be responsible for my random restarts - apparently test 13 picks up stuff that RAM would almost never come across in day to day normal use?

    So there's the story, if any of you can give me some advice which leads to me finding a solution I will be forever in your debt because at this point I am just at a complete loss at what to do - Is it likely to be my memory? Or is it my motherboard? Or does my memory failing test 13 have no relevance whatsoever to the random restarts I have been having and am I wasting my time, is it likely to be another issue like my GPU?

    I have swapped out my PSU with a spare one (One is gold one is platinum, both very highly rated) and the issue still occurred.

    Thanks for any guidance you can offer
      My Computer


  2. Posts : 5,656
    Windows 7 Ultimate x64 SP1
       #2

    Are you monitoring the temps?
    Are the RAM getting the correct timings? Check in BIOS. It is possible your RAMs are incompatible with the new board but I am not experienced with these stuff.

    Try a clean startup Troubleshoot Application Conflicts by Performing a Clean Startup
    Drivers up-to-date?
      My Computer


  3. Posts : 9
    Windows 7 64 bit
    Thread Starter
       #3

    GokAy said:
    Are you monitoring the temps?
    Are the RAM getting the correct timings? Check in BIOS. It is possible your RAMs are incompatible with the new board but I am not experienced with these stuff.

    Try a clean startup Troubleshoot Application Conflicts by Performing a Clean Startup
    Drivers up-to-date?
    Yep I have monitored temps both when gaming and when running stress testing programs, my temps are very good, GPU very rarely goes over 65c and CPU is just about the same, 63c max I think it was.

    My ram timings are correctly set, so is the voltage, I've tried manually setting them as well as using the XMP Profile.

    The ram is definitely compatible as well, it's just Dual channel DDR3, I checked when building it.

    I've also tried a clean startup, it had no effect.

    All the drivers and BIOS are up to date.
      My Computer


  4. Posts : 5,656
    Windows 7 Ultimate x64 SP1
       #4

    (these seem irrelevant but) You can try:
    - loading defaults in BIOS.
    - disable C1E
    - disable Intel SpeedStep (IEST)
    - set a high performance power plan in Power Options (Control Panel).
      My Computer


  5. Posts : 9
    Windows 7 64 bit
    Thread Starter
       #5

    GokAy said:
    (these seem irrelevant but) You can try:
    - loading defaults in BIOS.
    - disable C1E
    - disable Intel SpeedStep (IEST)
    - set a high performance power plan in Power Options (Control Panel).
    I will give those a go and report back.
      My Computer


  6. Posts : 9
    Windows 7 64 bit
    Thread Starter
       #6

    Sadly it is still occurring even after those changes, just got a crash while playing Pillars of Eternity.

    One thing I was wondering - I recently read that driver verifier can sometimes point you in the right direction with these problems so I read a guide on how to enable that and did so, just about an hour ago my PC's screen froze, the audio started breaking up and then it gave me a blue error screen with a sad smiley face that I have never seen before, it told me there was an error and it had to shutdown.

    I should point out I have never ever had a bluescreen before so I am guessing that is only because I have driver verifier on? I'm assuming it turned my random restarts into bluescreens because it is detecting it somehow before it happens or something, I really have no idea.

    This gave me a minidump file unlike any of the other times I have had straight-to-black-screen restarts, at the bottom of the minidump it says "Probably caused by ntoskrnl.exe (nt +150ca0 )"

    Does that point towards anything? If not, what should I do now?

    Thanks for your help so far
      My Computer


  7. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #7

    plasmarifle said:
    I have a bit of time to really focus on this lately and try to finally fix the issue, so last night I was running memtest while I was asleep and found that my memory had lots (thousands) of errors on the Test 13 (Hammer Test) part of memtest.

    Today I individually tested each 4gb stick by itself in both the first slot AND the second slot of the motherboard, just running test 13 on memtest and every single test had errors.
    OK, first off MemTest86 is notorious for RAM failing on 'Hammer Test' when there is actually nothing wrong with the RAM, that's why we recommend MemTest86+ instead as it's far more reliable. Get your RAM tested properly before going any further.

    Download and run MemTest86+ to test your RAM. RAM - Test with Memtest86+

       Note


    Run MemTest86+ for at least 8 passes. Ideally set it off before you go to bed and leave it overnight, we're looking for zero errors here. A single error will show something's going bad with your RAM.


    Post back with the results.

    plasmarifle said:
    One thing I was wondering - I recently read that driver verifier can sometimes point you in the right direction with these problems so I read a guide on how to enable that and did so, just about an hour ago my PC's screen froze, the audio started breaking up and then it gave me a blue error screen with a sad smiley face that I have never seen before, it told me there was an error and it had to shutdown.
    Driver Verifier is recommended when we suspect drivers to be the cause of a BSOD that aren't showing, it would not help in this case if you're not experiencing BSODs. Disable Driver Verifier now.

    You say you had a sad smiley face on the BSOD? Are you running Windows 7 or 8?
      My Computer


  8. Posts : 9
    Windows 7 64 bit
    Thread Starter
       #8

    Wow, there is two memtests? I had no idea, that is so bizarre, no idea at all I was using the wrong one.

    I will use the correct one when I go to bed tonight for 8 passes, thanks man.
      My Computer


  9. Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       #9

    No problem, check the edit I made to my last post.
      My Computer


  10. Posts : 9
    Windows 7 64 bit
    Thread Starter
       #10

    Yeah I am using 7 again now, sorry there's a few things I haven't included in my messages because I've been trying so much stuff, when I originally made this post I was on 7 as I normally am, then today I changed up to 8.1 to see if it would have any difference, fresh install, that is when I had driver verifier on. Then it happened again with the smiley face thing so I reverted back to 7 as I hate 8.1 and was just seeing if it would perhaps stop the problem, so now I'm on a fresh install of 7 with no driver verifier.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 07:40.
Find Us