JIT problem with sea tools for windows


  1. superqaz
    Posts : 35
    win 7 64 bit
       New #1

    JIT problem with sea tools for windows


    hi
    trying to run sea tools for windows and get this message after disk long generic test tool ran all night without contemplating

    can anyone suggest an action
    thanks

    win 7 x64

    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.

    Code:
    ************** Exception Text **************
System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
   at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
   at System.Diagnostics.Process.Start()
   at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
   at SeaToolsforWindows.frmSTXMain.SeaToolsHelpToolStripMenuItem_Click(Object sender, EventArgs e)
   at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
   at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)
   at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
   at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
   at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met)
   at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met)
   at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
   at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ToolStrip.WndProc(Message& m)
   at System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.100.0 built by: NETFXREL2STAGE
    CodeBase: file:///G:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
SeaToolsforWindows
    Assembly Version: 1.4.0.2
    Win32 Version: 1.4.0.2
    CodeBase: file:///G:/Program%20Files%20(x86)/Seagate/SeaTools%20for%20Windows/SeaToolsforWindows.exe
----------------------------------------
Microsoft.VisualBasic
    Assembly Version: 10.0.0.0
    Win32 Version: 14.6.81.0 built by: NETFXREL2
    CodeBase: file:///G:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.81.0 built by: NETFXREL2
    CodeBase: file:///G:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.81.0 built by: NETFXREL2
    CodeBase: file:///G:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.81.0 built by: NETFXREL2
    CodeBase: file:///G:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.91.0 built by: NETFXREL2STAGE
    CodeBase: file:///G:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.81.0 built by: NETFXREL2
    CodeBase: file:///G:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.81.0 built by: NETFXREL2
    CodeBase: file:///G:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.81.0 built by: NETFXREL2
    CodeBase: file:///G:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Management
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.81.0 built by: NETFXREL2
 seagate  usb disc check

   CodeBase: file:///G:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Management/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------
SpawnCLR
    Assembly Version: 1.0.5507.15473
    Win32 Version: 1.4.0.2
    CodeBase: file:///G:/Program%20Files%20(x86)/Seagate/SeaTools%20for%20Windows/SpawnCLR.DLL
----------------------------------------
System.Xml.Linq
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.81.0 built by: NETFXREL2
    CodeBase: file:///G:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.Linq.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
      My Computer
    Quote Quote

  3. Mellon Head
    Posts : 3,487
    Win 7 Pro x64/Win 10 Pro x64 dual boot
       New #2

    I don't really understand your question, but if you are asking what I think you're asking...

    What you are seeing there is a standard .NET error message. Seatools can't find something that it needs to operate. The error message is telling you where and what in the program is failing. Unfortunately, it's telling you so much detail, the message is useless. It's not telling you what file or assembly it needs.

    The JIT debugger won't do you much good because you have to

    A) Have a JIT debugger or Visual Studio installed on your machine
    B) Be able to understand the output from the JIT debugger
    C) And the program has to be compiled with debugging enabled to debug with JIT
      My Computer
    Quote Quote

  4. superqaz
    Posts : 35
    win 7 64 bit
    Thread Starter
       New #3

    Mellon Head

    thanks very much for the really good explanation, I'll try one more install of the program then wait for a reply from seagate.....unless u have any ideas
      My Computer
    Quote Quote

  6. Mellon Head
    Posts : 3,487
    Win 7 Pro x64/Win 10 Pro x64 dual boot
       New #4

    You might be missing part of the .NET framework needed for the program to run. Most Windows installations have it by now, but in case you don't, you could try downloading this and installing it from Microsoft:

    https://www.microsoft.com/en-us/down....aspx?id=48130

    It's a web installer, and will only download the bits that you need. Try that and see if Seatools works.
      My Computer
    Quote Quote

  7. DavidE
    Posts : 6,330
    Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64 +Linux_VMs +Chromium_VM
       New #5

    You could try SeaTools for DOS.

    SeaTools for DOS and Windows - How to Use
      My Computer
    Quote Quote

  8. superqaz
    Posts : 35
    win 7 64 bit
    Thread Starter
       New #6

    Mellon Head said:
    You might be missing part of the .NET framework needed for the program to run. Most Windows installations have it by now, but in case you don't, you could try downloading this and installing it from Microsoft:

    https://www.microsoft.com/en-us/down....aspx?id=48130

    It's a web installer, and will only download the bits that you need. Try that and see if Seatools works.
    just tried again and its no better, not sure where to go from here. Dos looks like a lot of learning
      My Computer
    Quote Quote

  10. DavidE
    Posts : 6,330
    Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64 +Linux_VMs +Chromium_VM
       New #7

    superqaz said:
    Dos looks like a lot of learning
    Maybe these SeaGate instructions for using SeaTools for DOS will be easier for you:
    SeaTools for DOS | Seagate

    Yes, there is a learning curve for all of us when doing something new.
    You would have to learn how to download a IMG file and create/use a bootable CD for this.

    If you want to fix issues yourself and ask for help in forums, you will have to try new things and learn.
    If you have a "Geek/Tech" friend, can you ask them for hands-on help?

    superqaz said:
    I'll try one more install of the program then wait for a reply from seagate
    Has SeaGate replied ?
    They may have better suggestions, instructions, and help.
      My Computer
    Quote Quote

  11. superqaz
    Posts : 35
    win 7 64 bit
    Thread Starter
       New #8

    DavidE said:
    superqaz said:
    Dos looks like a lot of learning
    Maybe these SeaGate instructions for using SeaTools for DOS will be easier for you:
    SeaTools for DOS | Seagate

    Yes, there is a learning curve for all of us when doing something new.
    You would have to learn how to download a IMG file and create/use a bootable CD for this.

    If you want to fix issues yourself and ask for help in forums, you will have to try new things and learn.
    If you have a "Geek/Tech" friend, can you ask them for hands-on help?

    superqaz said:
    I'll try one more install of the program then wait for a reply from seagate
    Has SeaGate replied ?
    They may have better suggestions, instructions, and help.
    ok. Yes i looked at the dos instructions, my view is that if the NON dos program is meant to work i want to use it, and i dont mind putting in a bit of work in sorting it. Therefore I shouldn't need to use dos

    before i get into DOS i will explore the non dos program fully

    dont get me wrong i really appreciate anyones input but pls keep the lecture for ur kids, not appreciated
    Last edited by superqaz; 29 Dec 2015 at 11:34.
      My Computer
    Quote Quote

  12. superqaz
    Posts : 35
    win 7 64 bit
    Thread Starter
       New #9

    Mellon Head said:
    You might be missing part of the .NET framework needed for the program to run. Most Windows installations have it by now, but in case you don't, you could try downloading this and installing it from Microsoft:

    https://www.microsoft.com/en-us/down....aspx?id=48130

    It's a web installer, and will only download the bits that you need. Try that and see if Seatools works.
    thanks for that, i ran a "repair" and at first i didn't think seatools was working properly again as i got error msg , but after leaving it going all night it seems to be progressing slowly [see previous post]
      My Computer
    Quote Quote

  13. superqaz
    Posts : 35
    win 7 64 bit
    Thread Starter
       New #10

    seagate are replying but not helpful, however ive found that despite the error message saying that segate tools was not working properly ["unhandled exception has occurred" and the original msg about JIT] it still seems to be running . It's a 3 tb usb disc on a generic long test, any idea how long this might take [half way completed in 20 hours]
    d
    thanks
      My Computer
    Quote Quote

 

  Related Discussions
Goal: Dual boot Windows 7 and Linux and have an NTFS partition for both OS. Problem: When creating Logical Partitions with any Linux partition tool(Gparted, cfdisk) the Linux swap and ext 4 partitions shows up on Windows 7 as primary partitions outside of the Extended partition while the NTFS...
Hi. After having installed Daemon tools lite on my windows 7, I encountered problems. I have thus deleted the program, but whenever I start up my system this familiar message appears: "Initialization error 2. Daemon tools lite must have at least windows 2000. Kernel debugger must be turned...
Hi. After having installed Daemon tools lite on my windows 7, I encountered problems. I have thus deleted the program, but whenever I start up my system this familiar message appears: "Initialization error 2. Daemon tools lite must have at least windows 2000. Kernel debugger must be turned...
after the windows boots this error apperes ,i tried to updrade daemon tools at the last version but the problem still exist give me some advices. http://img411.imageshack.us/img411/6196/captureqv.jpg
hi i got problem with daemon tools 4.90,i cant unmount ISO and can't uninstall daemon tools :cry: what should i do? can i manually remove daemon tools ?
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 16:41.
Find Us