Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Startup Repair how to send info to Microsoft dialog

03 Dec 2016   #11
Anak

Microsoft Community Contributor Award Recipient

Win 7 Home Premium 64bit Ver 6.1.7600 Build 7601 - SP1
 
 

This has me stumped, I know where I can ask for more help, hope someone else has any ideas, hang in there.


My System SpecsSystem Spec
.
03 Dec 2016   #12
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Hi,
I have no help for built in windows recovery methods other than it pretty much confirms why most people use Free macrium reflect and it's winpe recovery cd/ flash media instead which also has startup repair if a system image was created and of course the recovery media
It has worked every time
Not to mention MS has no interest in fixing anything in win-7 beside upgrading to 10 as the only route to a so called fix.
My System SpecsSystem Spec
03 Dec 2016   #13
raysefo

windows 7 Enterprise
 
 

if I delete or change the place of a system file, is it possible to open that repair window which I want?
My System SpecsSystem Spec
.

03 Dec 2016   #14
Anak

Microsoft Community Contributor Award Recipient

Win 7 Home Premium 64bit Ver 6.1.7600 Build 7601 - SP1
 
 

Depends, delete or change the wrong one and you may never get it to boot and you'll have to use a disk or flash drive, but that's forbidden.
My System SpecsSystem Spec
03 Dec 2016   #15
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

It sounds like you have a work PC with Windows Enterprise.
The company may have locked down users from doing things.
Can you ask a company IT person about this ?
My System SpecsSystem Spec
03 Dec 2016   #16
Ranger4

Windows 7 Home Premium 64 bit sp1
 
 

DavidE's suggestion seems the best one so far.
My System SpecsSystem Spec
03 Dec 2016   #17
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Yes mate now I work in a governmental department what David and Ranger has said is correct and while I can change things like mouse size speed etc etc romping through the programs say just for a simple example I wanted to install Cleaner my efforts get blocked pretty well immediately.

I find the best way is to contact the IT people and depending on who you get of course most of our people are helpful to a point that is probably your only recourse. Having said that it depends on your level of control/senioority within the company/system too - I m just one of the plebs so am annoyingly restricted.
My System SpecsSystem Spec
04 Dec 2016   #18
raysefo

windows 7 Enterprise
 
 

I know what IT guys say, "restricted"
My System SpecsSystem Spec
05 Dec 2016   #19
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

If you're a restricted user, not much you can do to fix it yourself.
If the company gave you a new PC that isn't working right, the IT department should fix it or replace it.
Have you reported the problems to IT and asked them to fix the problems ?
My System SpecsSystem Spec
05 Dec 2016   #20
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Yes mate as David said plus trying to hack or crack it yourself could land yourself in hot water - best left well alone if the company you work for is like the department I work for - a quick and nasty slap on the wrists at best.
My System SpecsSystem Spec
Reply

 Startup Repair how to send info to Microsoft dialog




Thread Tools




Similar help and support threads
Thread Forum
Startup Repair- windows cannot repair; Stuck in restart loop
Hi, I am unable to start up my laptop (Windows 7 Home Premium). TOSHIBA Satellite C660-1J6 It is stuck in a loop of 'attempting to repair this computer', which is unsuccessful and restarts. There are no restore points to use. I have received the BSOD which disappears quickly during startup....
General Discussion
Repair expanded send to menu
I am trying to repair my extended send to menu which shows an empty folder. When I try to download Brinks Add_Send-To_to_Context_Menu.reg file it doesn't work and doesn't show on my desktop. Can some help a dummy?
General Discussion
Startup Repair to infinite reboot loops, Repair errors 0x5 & 0x490
Firstly, thanks for reading. My PC runs Windows 7 x64. I built it myself about a year ago for gaming. Occasionally running games I would BSOD and it would suck. I'd update all my drivers or try some game-specific fix and usually if I didn't fix it, I would just start playing something else...
General Discussion
Startup repair info while "windows is loading files"
I have an Acer Aspire 5750-6677. I3-2310m. It has been performing the startup repair for over a day. It's now, finally (I think), saying "windows is loading files". It has been doing this for HOURS! Can I simply turn it off and attempt a different method or will that make it worse? BTW: it came...
General Discussion
How to show Send/Receive dialog automatically
Just upgraded to 7 x64. Previously when checking mail in Outlook Express, the send/receive dialog box would automatically pop up to show you the progress of your email downloads. Live Mail doesn't do this unless you specifically hit the Send/Receive button. I know there's the small message in...
Browsers & Mail
Startup repair loop - Can't repair with system restore/repair/commands
Hello, I've been unable to access my custom build computer since around 5:00 yesterday. I chose to restart my computer at around that time just because it was slowing up a little and I usually do that to help, I had not installed any updates or new programs since 2 days ago when there had been a...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:58.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App