New
#1
Boot code 0x490 after moving hard drive to a new laptop
My laptop died Friday morning and I took the hard drive out and installed it into a backup laptop. Dead laptop = asus 555l and new laptop = dell lattitude e5510. Was able to boot into safe mode enough times to get all the drivers updated but then the dell got into a repair loop at the startup repair utility bailing with a 0x490 error code every time the unit booted. Was able to get back to a cmd prompt where I ran bootrec with the /fixmbr and /fixboot options then rebuilt the boot table with bcdedit. Still no luck. Here are my boot settings from the bcdedit dump. Any help would be appreciated. Thanks.
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {959c9d43-5cae-11e5-b845-b567baaa0d7d}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7
locale en-US
inherit {bootloadersettings}
recoverysequence {959c9d45-5cae-11e5-b845-b567baaa0d7d}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {959c9d43-5cae-11e5-b845-b567baaa0d7d}
nx OptIn
Windows Boot Loader
-------------------
identifier {959c9d45-5cae-11e5-b845-b567baaa0d7d}
device ramdisk=[C:]\Recovery\959c9d45-5cae-11e5-b845-b567baaa0d7d\Winre.wim,{959c9d46-5cae-11e5-b845-b567baaa0d7d}
path \windows\system32\winload.exe
description Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[C:]\Recovery\959c9d45-5cae-11e5-b845-b567baaa0d7d\Winre.wim,{959c9d46-5cae-11e5-b845-b567baaa0d7d}
systemroot \windows
nx OptIn
winpe Yes
Resume from Hibernate
---------------------
identifier {959c9d43-5cae-11e5-b845-b567baaa0d7d}
device partition=C:
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume1
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes
EMS Settings
------------
identifier {emssettings}
bootems Yes
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}
Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Device options
--------------
identifier {959c9d46-5cae-11e5-b845-b567baaa0d7d}
description Ramdisk Options
ramdisksdidevice partition=C:
ramdisksdipath \Recovery\959c9d45-5cae-11e5-b845-b567baaa0d7d\boot.sdi