System does not boots "Mark Partition as Active"

Page 1 of 3 123 LastLast

  1. Posts : 1
    Windows7 Home Basic 32bit
       #1

    System does not boots "Mark Partition as Active"


    Hi all,
    I have a HP dv3-2314tx laptop, Windows 7 Home Premium 32-bit OS which has two disk drives(C,D). D for recovery. C drive contains OS and all my files.
    In Disk Management I marked C drive as "Mark Partition as Active". It was sowing some warning. But I pressed OK button. Now my laptop is not boots. What should I do? Should I reinstall my OS or any solution available?
      My Computer


  2. ryo
    Posts : 1,953
    windows 7
       #2

    hello and welcome.
    for what you mark partition as active.
    as i know, marking partition as active in an advanced task only perfomed by advanced users.

    you can try to into your BIOS setting and set the time and date before the issue. and save setting. after that try to boot.

    hope can help
    Ryo~
      My Computer


  3. Posts : 94
    Windows 7 32bit, Snow leopard
       #3

    dont worry this is really easy to fix!

    insert your windows 7 cd and choose the repair option
    then get to command prompt from the repair menu and write these:

    Code:
    diskpart
    list disk
    select disk <replace this with the harddrive number that windows is installed on as seen eariler ( eg; 1 )>
    list partition
    select partition <replace this with the partition number that windows 7 is installed on ( using the information you saw when you typed in the list partition )>
    active
    exit
    then restart your computer and if that does not work, try the startup repair for around 5 times until fixed :)
      My Computer


  4. Posts : 1,747
    window's 7
       #4

    well i believe your problem caused by accidentally set two partition as active or bootable while in windows there's only on partition allowed to be set as active. Error that you got maybe like this
    Warning

    Do not mark a partition as active if it does not contain the loader for an operating system. Doing so will cause your computer to stop working.
    Loader means bootable to load your windows
    Solution-plug your hdd to other pc and use use disk management to unmarked it as active
      My Computer


  5. Posts : 10,200
    MS Windows 7 Ultimate SP1 64-bit
       #5

    maheshrpm said:
    Hi all,
    I have a HP dv3-2314tx laptop, Windows 7 Home Premium 32-bit OS which has two disk drives(C,D). D for recovery. C drive contains OS and all my files.
    In Disk Management I marked C drive as "Mark Partition as Active". It was sowing some warning. But I pressed OK button. Now my laptop is not boots. What should I do? Should I reinstall my OS or any solution available?
    Basically, you have most probably, as another indicated, declared the wrong partition to be active in other words to be the boot partition.

    Now the procedure to fix this problem is essentially as suggested by iphone, except:

    Boot up from your Win 7 DVD.
    When you get to the very first dialog where you are giving a choice to do anything (what it is makes no difference), then:
    SHIFT + F10 key combo

    This gets you to a command prompt where you can use the DISKPART program.

    The DISKPART program recognizes a set of commands.
    Most of the ones of interest to you were given in another post.

    · type DiskPart, Enter key
    · type List disk, Enter key
    note the numeral of the disk you want to clean
    for example purposes, I’ll be using the numeral 0
    · type Select disk 0, Enter key
    · type Detail disk, Enter key
    this info will let you know if you selected correctly
    · type Select Partition 1, Enter key
    this selects the Win 7 partition
    · type Active, Enter key
    this declares the partition as the boot partition
    · type EXIT, Enter key (this exits DiskPart)
    · type EXIT, Enter key (this gets you back where you were)




    At this point, remove the DVD and reboot your system.
      My Computer

  6.    #6

    Why did you mark C active? Were you experiencing problems that led you to do this?

    Most likely your System MBR is on a boot partition installed by your manfacturer. You either need to return the Active flag to that partition, or recover the System MBR into C: Win7 partition.

    Using free Partition Wizard bootable CD, you can examine your drive map to see which is the System Partition, then rightclick it to Modify>Set to Active, OK. Next rightclick C to Modify>Set to Inactive.

    If it won't start then you may need to repair the MBR by booting your Win7 DVD Repair console or Repair CD, click through to Recovery Tools list to run Startup Repair up to 3 separate times with reboots.

    System Repair Disc - Create

    If no partitions now show the System flag, recover the System drive into C:Win7 by marking it active and running Startup Repair exactly as given in the paragraph above.
      My Computer


  7. Posts : 3
    windows 7 starter
       #7

    hi all ,
    i have the same problem here but the fact is that i'm using windows starter on hp mini !
    which actually doesn't have a dvd drive !
    and it just came with this copy of windows preinstalled !
    and i don't have the dvd or cd of it !
    so it would be so kind of you guys to help me :)
      My Computer


  8. pk3
    Posts : 2
    windows 7 home premium 64 bit
       #8

    marked my E DRIVE as active


    i hav mistakenly marked my E drive active..! Now my laptop wants a boot device.. Will my system repair disc work as boot device.? By the way i also have hp recovery dvds .
      My Computer


  9. Posts : 26,863
    Windows 11 Pro
       #9

    If you have the repair disk you created in Control Panel, boot to it, select use other options and select command prompt and follow the instructions given by Karlsnooks in post #5 above. If you don't have one you can use one made on another computer with the same Operating system as yours.
      My Computer

  10.    #10

    Use one of the methods in Troubleshooting Windows 7 Failure to Boot to mark the correct partition Active then run Startup Repair - Run 3 Separate Times. The installer is provided if you don't have one or a System Repair CD.
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 23:35.
Find Us