Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Startup repair running for 9+ hours after bsod

24 Aug 2017   #1
Bmck

Windows 7 professional 64 bit
 
 
Startup repair running for 9+ hours after bsod

Hi,
First Im on my phone and don't have PC access so please excuse my post inadequacies.

My PC bsod today and hung at windows splash screen. Bsod was probably atapi.sys but was definitely something disk related and it wouldn't start the memory dump.

Next boot attempt brought up startup repair and it has been on repairing disk errors for almost all the 9 hours. I thought it switched to a different phase at one point but could be wrong. Haven't noticed it rebooting but could be wrong. I'm tempted to stop it but don't want to loose progress or cause additional problems so I'm here asking if cancellation could cause that. Need it back asap for work.

Computer has multiple drives so wondering if it could be trying to repair one of them. Os dive is a mushkin chromos 240gb ssd so I wouldn't think it should take so long. Largest drive I have is 5tb so I'm wondering if they are being scanned. I also have a drive with vista from an old computer thown in but it's not dual boot and don't think bios is even set to be able to boot from it but still wondering since it is taking so long.

If it won't loose progress or especially not cause damage I'm thinking need to cancel and disconnect the othe other drives.

Hope to get a reply before sleep so it can be working overnight.

Thanks


My System SpecsSystem Spec
.
25 Aug 2017   #2
Bmck

Windows 7 professional 64 bit
 
 

Well, when I try to cancel it say the current repair operation cannot be cancelled. Will turning the PC off cause problems?

Also, fyi the drive doesn't have it's own bootable diagnostic tool, or non bootable tool for that matter.
My System SpecsSystem Spec
25 Aug 2017   #3
Megahertz07

Windows 7 HP 64
 
 

Welcome to the Forum.

It's typical OS disk problem.

Boot from the win 7 installation disk, go to repair and open a cmd window.
Type
chkdsk c: /f

If it doesn't find bad clusters or bad blocks type
sfc /scannow
My System SpecsSystem Spec
.

25 Aug 2017   #4
TechnoMage2016

Windows 7 Ultimate, SP1, x86
 
 

Like, who in this day and age has an OS install disk? They don't come with new computers anymore.

I'd stop that recovery process, even if you have to power DOWN the PC. Then disconnect every over drive on the system but the C: drive and reboot and just see what happens.

At that point, if it were me, I'd boot up the system from my Ghost Boot CD and run a restore of my last C: drive backup. But I'm guessing that if you had a backup copy of C:, you would have already used that. Eh?

If you were closer, I'd say bring that PC down here and I'd fix it for you.

So all I can do from here (Central FL.) is wish you Good Luck.

Cheers Mate,
TechnoMage
My System SpecsSystem Spec
25 Aug 2017   #5
Bmck

Windows 7 professional 64 bit
 
 

Yeah I powered down last night and ran chkdsk from startup repair command prompt. Strange that the automated disk repair stalled out like that. I would think it was doing the same thing.

I had an image of the drive but it was a couple of months old. Trying to get an image now. Takes a few tried with macrium reflect due to ataport.sys bsod for some reason.
My System SpecsSystem Spec
Reply

 Startup repair running for 9+ hours after bsod




Thread Tools




Similar help and support threads
Thread Forum
Startup Repair running forever
I bought a refurbished Dell Optiplex i7 desktop and it came with Win7 Pro 64 bit installed, no CD of any kind. The other day it was running when the electricity shut off. When I tried to start it, after downloading files(?) it went into Startup Repair and after six hours of that I gave up and...
General Discussion
BSOD on startup, unknown error, startup repair running too long
As the title suggests, my Acer Aspire has been running startup repair for over 20 hours following a BSOD yesterday. I'm not sure if it's worth the wait so maybe you all can shed some light. Yesterday I was stressfully trying to search for something (using Chrome) and the website I was on froze;...
BSOD Help and Support
Startup Repair after PC is up and running
Is there a way to run startup repair after the PC is up and running, or is it only possible upon startup. I have very erratic startups and just cannot find a solution.
Performance & Maintenance
startup repair running for day can I end it
Had an issue with startup unmountable boot issue. Ran windows startup. The sucker has now been running for days. Small laptop t61. Will not let me cancel. Are there any good options to exit out of this startup repair? Madness
BSOD Help and Support
Running Startup Repair Leads to Black Screen
Hi Everyone, About a week ago I had trouble with my computer not loading and I posted a topic about it. Nothing was working so I ended up formatting my hard drive and starting over. It's been working fine for about a week, but then yesterday afternoon after I finished with it and left for...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:05.
Twitter Facebook Google+