Stuck in Startup Repair loop, Cannot access Safe Mode or SystemRestore

Welcome to the forums, Stephanie.

Are you trying to start the laptop with the external drive plugged in? If so, please unplug it and try again.

If you aren't, try plugging it in before you start the laptop. Windows may be looking for that drive in order to boot. It's possible that the drive was not ejected properly when it was removed.

In any case, one of the two conditions above may be causing the laptop to go into startup repair. Let is know if either of those things works. If not I'll see if I can round up a couple of experts who are better at this than I am. :)

Oh, and I don't think unmounting the drive would be a good idea at this time. It might mess up all of your files. The good news is that we can probably save all of your personal files and data at this point, as long as the drive isn't corrupted.

Hi,
There are a couple of linux solutions to retrieving files from a machine that can not boot all that is needed is a usb flash drive and also somewhere to copy and paste your files too,
Lucid Puppy way to recover files from a non-bootable computer - Windows 7 Help Forums

Emergency Kit - save your files from a dead OS - Windows 7 Help Forums

You'll have to on startup access your boot menu to select the flash drive or dvd with linux on it often by tapping the delete key or F5 possibly as soon as possible after pressing the power button to startup.

Hi Stephanie,

If your computer was readily provided with an operating system, it likely also will have a special partition on your hard disk, called the recovery partition, often hidden and protected, with the original OS setup files and the computer specific drivers.
This special recovery & installation partition can often be accessed via either :
- spamming the F2 (sometimes F1) key repeatedly and very rapidly between the moment the manufacturer logo was displayed (that's when you have to start hitting the key) but still before the Windows Logo screen with the loading animation would appear (too late then). The time frame is very small, between 1 and max 3 seconds. You may have to reboot the PC multiple times (press the reset button) before you succeed;
- spamming the F8 key (at the same moment) which offers you the alternative boot menu (where you can select to boot in safe mode for instance). There may be a second page to this menu (sometimes F10 shows this, read carefully on screen) where an option to start the recovery partition is offered: it then reboots and goes directly to the recovery partition (don't spam the F1/F2/F8 in this case).

Have you tried the above ? This would suppress the need to obtain the recovery disk, as it's there already, including the initial setup files.

Torchwood and Thrashzone have offered links to download either the Win 7 install disk or a Linux based rescue solution with Lucid Puppy -- both as ISO files. Note that both require that you either make a bootable CD of these downloads or a bootable USB/flash drive -- this obviously has to be done from another computer, e.g. from which you're reading these messages and which features a CD writer and/or USB ports, with some blank CD media or free USB stick available).

If you only want to fetch the (much smaller) ISO with only the Win 7 Recovery tool, you'll get it here:
Win 7 System Repair ISO Download Solved - Windows 7 Help Forums

As a side note, if you're computer savvy enough, you may also want to consider unmounting the hard disk from the failing computer and connecting it to the computer you're using right now, provided it offers the right connectivity (you'll have to open both computers once powered off to check for sure). The benefit of this is that you would immediately see on the computer you're using now the whole disk, from within this (presumably also Windows) environment, with easy drag & drop to safeguard your personal files.

As you can see, many options are available, just let us know as you progress if you need more guidance.