My wife's PC will Shutdown but not auto Restart when you choose Restart, you either have to turn it off completely via the power button for 4 secs. or by using the Restart button on the case.
I have searched the net but haven't found a solution to date, can anybody assist me please.
Regards,
You've not done your "DO's" as to what PC, what make and model, what OS, etc. ???
How do you normally shut down that PC?
For years I've had just ONE way to shut down any of my 20 PC's and the PC's of my 100+ customers.
I put a shortcut to the Windows Shutdown command, on the desktop, for ease of use.
For Windows 7, for instance, since you've posted in the Windows 7 forum, I use the shortcut with the syntax, %windir%\System32\shutdown.exe /s /t 1
If you'd like to use this shortcut on your own PC, just copy and paste the above blue line into a new desktop shortcut.
Please fill in the blanks, as I've outlined above, so we can better help you.
Cheers Mate!
To clarify, when you choose "Shut down" from the start menu, the computer shuts down just fine?
However, when you choose "Restart", what happens?
When "restarting" the computer is supposed to shut down, and start right up again and boot into Windows. What does yours do instead?
There are no physical "restart" buttons on your computer case. There is the power button, which when held down for a few seconds will abruptly shut down the machine (not good, only to be used when the computer freezes completely) and sometimes a reset button, that will reset the machine and make it re-boot.
I use the same Shutdown shortcut except that I use: /s /t 00 instead and I use -r -t 00 for my Restart shortcut.You've not done your "DO's" as to what PC, what make and model, what OS, etc. ???
How do you normally shut down that PC?
For years I've had just ONE way to shut down any of my 20 PC's and the PC's of my 100+ customers.
I put a shortcut to the Windows Shutdown command, on the desktop, for ease of use.
For Windows 7, for instance, since you've posted in the Windows 7 forum, I use the shortcut with the syntax, %windir%\System32\shutdown.exe /s /t 1
If you'd like to use this shortcut on your own PC, just copy and paste the above blue line into a new desktop shortcut.
Please fill in the blanks, as I've outlined above, so we can better help you.
Cheers Mate!
Now it doesn't matter whether I am Restarting (reboot) using this shortcut or following a MS window after an update etc., the PC will shutdown but will not Reboot back into Win 7.
Motherboard - P35-DS3L
CPU - Core 2 Duo E6550 @2.35GHz
Memory - 4GB DDR2 (PC2-5300)
OS - Windows 7 Ultimate x64 Service Pack 1
When I "restart" the PC it shutdowns and remains in that mode, it does not start right back again, I have to press the Reset button on the front of the case.
There are 2 buttons on the front of this case - 1 Lge one - Power and 1 Sml one - Reset (Reboot), similar to the picture below.
Thanks for clarifying. Very interesting. Has it always done this, or did this start happening after some recent windows updates or other changes?
Since I'm new here and people have been very helpful on the thread I posted, I'm going to cautiously dip my toe in here.
My immediate thoughts when I read this were ATX Power supply problem. I was building PC's before ATX was even a thing, and I seem to remember encountering a similar problem on a build when ATX first came out.
Waaaay back in the the days of W95 (and obvioulsy prior) you had to use the power button to turn off after selecting shut down. Anyone else remember the "It is now safe to turn off your computer" screen?! When ATX came out it did away with this and as I remember it that was its main distinction from previous PSU's. Do you have another PSU you can swap out with?
Apologies to the professionals here if I'm way off base, don't want to give anyone bad advice but this hit me as a potential cause of the problem.
No it is not a recent thing, it has been like this for a couple of months now. It doesn't bother my wife much but it annoys the hell out of me though.
I ran a startup repair from the Win 7 Disk yesterday and that did fix something in the startup area, but
not the problem we are discussing.
I have Googled myself out trying to find an answer to the problem, I cannot even remember if it happened after an update, it has been that long.
Last edited by subyroo; 17 Apr 2018 at 05:24.
Just for whatever it's worth to whomsoever gives a hoot....
I just got through fixing a neighbors eMachine that would not boot up.
I had just cleaned it out and installed a new CMOS battery less than two weeks ago, and the PSU checked out AOK with my digital PSU tester, so that didn't leave a lot to look at.
It had/has two 2GB DDR2 ram sticks in it, so I just pulled them both out and hit the ON switch. The motherboard beeped loudly, to denote a RAM failure.
So I took both ram sticks into my little shop and thoroughly cleaned the gold edge connectors.
I first polished them up nice and shiny with an eraser and then cleaned them (the edge connectors) off with a rag soaked in lacquer thinner.
When I reinstalled the ram and hit the power button, the 9 yr old PC came right UP!
I then ran several scans and tests and it worked perfectly. So when ram is the last thing to suspect that's causing a problem, I always take it out and polish up the gold edge connectors.
Cheers Mates!
TechnoMage
Quote