Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7 Pro Giving Problems Booting on SSD

12 Jul 2018   #1
Candoo

Win7 Pro 64
 
 
Win7 Pro Giving Problems Booting on SSD

I swapped out my HD with a Samsung 860 Evo SSD. I used the migration software from Samsung. The first few times I booted my machine it worked well. Then I started getting problems booting. If I shut down or restart my machine, the only way Win7 will start is if I enter the bios and F10 out. Sometimes I have to do this a few times.

I am new to SSD's so I'm not sure how this is supposed to work. The migration software has created 2 partitions on the disk: "C" which is my Win7 operating system and "G" (which wasn't there/didn't show up on the original HD and is very small). The G partition contains a file named "bootmgr", a folder "BOOT", that contains several language folders. In the US folder are files "bootmgr.exe.mui" and "memtest.exe.mui" . In the BOOT folder there are files named "BCD", "bootstat.dat" , "memtest.exe" and .log files.

In Computer Management:
G partition is marked "Healthy (System, Active, Primary partition)
C partition is marked "Healthy (Boot, Page File, Crash Dump, Primary partition) but NOT active

I was just going to mark "C" as active, but I didn't want to attempt this without asking for expert advice in case it totally screws everything up and I brick my system. So, suggestions how to proceed so this thing will boot normally ?


My System SpecsSystem Spec
.
12 Jul 2018   #2
mrjimphelps

Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 8.1 Pro 32-bit (VMWare guest)
 
 

I suggest you reinstall your previous hard drive, and that you then do a backup of the hard drive using something like Macrium Reflect Free. Also, be sure to create the Macrium emergency boot disk.

Now shut the computer off, remove your hard drive, and install the SSD. Now boot to the Macrium emergency boot disk. This will put you into Macrium Reflect Free.

Now restore your backup to the SSD. When done, remove the Macrium emergency boot disk and reboot the computer.

Finally, make sure that TRIM is activated on your SSD. Also, make sure that the alignment is correct. (I don't know how to check the alignment, but people I trust and respect have said that you need to check the alignment.)
My System SpecsSystem Spec
12 Jul 2018   #3
Megahertz07

Windows 7 HP 64
 
 

We can't help much as your system specs doesn't have all the information we need.
Please edit your profile with ALL your hardware specs.
The tutorial below [Published by Brink and written by CyberZeus] let's you easily see all of your system information, along with the option of making filling out your system specifications here at Seven Forums easier.
System Info - See Your System Specs - Windows 7 Help Forums

On OEM computers (Dell, HP etc) you have a small partition (normally called System, without a disk letter) with the boot loader and other maintenance software. You should also have a recover partition with the C: disk image for doing a Factory recover.

Instead of magician (migration software from Samsung) use Macrium Software | Macrium Reflect Free
My System SpecsSystem Spec
.

12 Jul 2018   #4
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

1. admin command prompt:

diskpart
sel vol c
act
exi
bcdboot c:\windows /s c:


2. If you have any difficulty after that, try hitting it with bootsect. It isn't in the installed version of windows, so do that from winpe. Or copy bootsect.exe from boot.wim\windows\system32 to your installed windows\system32

admin cmd prompt:
bootsect /nt60 /all /mbr

Or you can use Bootice to do the same job
BootIce.zip


My System SpecsSystem Spec
12 Jul 2018   #5
Candoo

Win7 Pro 64
 
 

My son originally had this machine (some years ago) and he just mentioned that he had it set up to dual boot with Win XP. I never noticed as it has only booted into Win7 for me. Even with making an image of the original HD, the problem (if that is the problem) is probably still going to be inherent. Surely there must be a good utility or way for repairing the BCD files. I have a number of programs that I've uninstalled and others that I have installed since having the SSD, and it was quite time consuming.
My System SpecsSystem Spec
12 Jul 2018   #6
Candoo

Win7 Pro 64
 
 

Quote   Quote: Originally Posted by SIW2 View Post
1. admin command prompt:


Or you can use Bootice to do the same job
Attachment 404476
For Bootice, download the 32 or the 64 bit version ?
My System SpecsSystem Spec
12 Jul 2018   #7
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Quote:
way for repairing the BCD files
You can also load the bcd hive in bootice and delete errant entries ( such as an ntldr (xp) entry if it is there)


Bootice
If you are using x64 operating system, you can use either version. If you are using x86, then only the x86 version will run.



You need to do the commands listed in 1.


Bootice can be used instead of the bootsect command listed in 2.
My System SpecsSystem Spec
Reply

 Win7 Pro Giving Problems Booting on SSD




Thread Tools




Similar help and support threads
Thread Forum
re: laptop is giving problems after it heats up
I have a HP Presario C700 laptop. Os Win7 home 32bit. When I 1st turn the laptop on cold everything is fine. After a while the front left side of the laptop gets warm. It isn't hot enough to burn my hand. I can rest my hand there for a long time but it does get a bit uncomfortable after a while...
General Discussion
Problems booting from my win7 usb drive
So a couple of nights ago i created a boot able win 7 drive. I am pretty positive it works and it is not the issue with the problem i am having but you never know right? Anyways i plug in the usb to my other computer,the on im installing windows 7 on and i go through the bios during startup and i...
Installation & Setup
Problems dual booting with ubuntu - now Win7 wont start
Hi, I have a problem which I'm lookin for some advice. I've downloaded and loaded up ubuntu 11.10 on my win7 laptop. I assumed I required several partitions to run ubuntu alongside win7 - but having freed up some space (100gb) in gparted – which then stayed “unusable” - I then (initially)...
Installation & Setup
LAN giving problems?
Hi all, I recently installed a plug and play Ethernet adapter into my pc which is Win7. I am trying to LAN with a windows XP pc (which previously worked with my onboard adapter). When I view the status of the Local area connection, it shows that there are packets being sent and received to...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:11.
Twitter Facebook Google+