Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows won't fully start

4 Weeks Ago   #191
cedar

Windows 7 Pro x64
 
 

Vineet,



I post here with my other computer.
The one we're trying to fix you had me disconnect everything a long time ago.
But just to make sure I copied the commands you gave and transferred them to the other computer so I could copy and paste there.


It's not wanting to take.
It keeps saying that BiosConfigUtility64.exe is not a valid windows program or recognized command.
Error pics below.


thanks!




Attached Thumbnails
Windows won't fully start-20180921_204506.jpg   Windows won't fully start-20180921_204624.jpg  
My System SpecsSystem Spec
.
4 Weeks Ago   #192
cedar

Windows 7 Pro x64
 
 

Think I found the problem (or at least A problem) :).

I was checking the files I copied to the system32 folder and the BiosConfigUtility64.exe file showed as 0kb.
So I recopied it into the folder and now it seems to have accepted the command.


PM'ing you with files.


thnx!


Attached Thumbnails
Windows won't fully start-20180921_210534.jpg  
My System SpecsSystem Spec
4 Weeks Ago   #193
Vineet Garg

Windows 7 Ultimate x32 With Sp1 + Vista Ultimate x32 with Sp1 & Sp2 !!
 
 

Hi cedar,
Greets,
Sir,
1) I was checking the files I copied to the system32 folder and the BiosConfigUtility64.exe file showed as 0kb.
Good, Well found. I expect the file BCUErr.cfg (1 KB) is also in good condition there!
2) Many steps/reports are still due from posts 188 & 190.

Let us know,

Thanks & Regards. ...
My System SpecsSystem Spec
.

3 Weeks Ago   #194
cedar

Windows 7 Pro x64
 
 

Quote   Quote: Originally Posted by Vineet Garg View Post
2) Many steps/reports are still due from posts 188 & 190.

Let us know......

Have reread said posts and can't figure out what I need to do that I haven't already done.


thnx!
My System SpecsSystem Spec
3 Weeks Ago   #195
Vineet Garg

Windows 7 Ultimate x32 With Sp1 + Vista Ultimate x32 with Sp1 & Sp2 !!
 
 

Hi cedar,
The things which are due!
1) You are supposed to run a command from elevated command prompt. So, open elevated command prompt & type slmgr -rearm & press 'Enter'. It will prompt to restart the pc, do so. Any change in the status ''This copy of Windows is not genuine'' ?
2) Now run this batch file & share the information.
https://www.sevenforums.com/attachme...icensetype.bat

Let us know.

Thanks & Regards. ...
My System SpecsSystem Spec
3 Weeks Ago   #196
cedar

Windows 7 Pro x64
 
 

I re-armed the windows for another 30 days and the "not genuine windows" message disappeared from bottom right corner.


Sent you pm also.




thnx!
My System SpecsSystem Spec
3 Weeks Ago   #197
Vineet Garg

Windows 7 Ultimate x32 With Sp1 + Vista Ultimate x32 with Sp1 & Sp2 !!
 
 

cedar,

1. As per reports, an installation with simple/standard retail iso of win7 pro sp1 x64 should be activated online easily. You would need to enter the key during installation. Now we can wash out & optimize your hard disk without any fear. But its a later part!
2. Now we would again try to get verbose report about your Bios configuration. So,
(i) make a new folder in c: with the name NEW.
(ii) put the two files BiosConfigUtility64.exe & BCUErr.cfg in the newly created folder NEW
( If needed the two are here : The 2 files.rar - Google Drive )
(iii) we need to run some commands from the elevated command prompt so, open the elevated command prompt
(iv) type the command cd c:\NEW & press enter.
(v) now run BiosConfigUtility64.exe /?
(vi) now run BiosConfigUtility64.exe /verbose /GetConfig:verconfig.txt
Let us see what happens/appears in command prompt window & whether a verconfig.txt is created in the NEW folder , share it.

Let us know.

Thanks & Regards. ...
My System SpecsSystem Spec
3 Weeks Ago   #198
cedar

Windows 7 Pro x64
 
 

Sent you pm Vineet.


thnx!
My System SpecsSystem Spec
2 Weeks Ago   #199
Vineet Garg

Windows 7 Ultimate x32 With Sp1 + Vista Ultimate x32 with Sp1 & Sp2 !!
 
 

Hi cedar,
Greets,
Sir,
1) You did not answer PM.
2) I am on the job.
3) What are the entries in Device Manager > Display Adapters

Let me know.

Thanks & Regards. ...
My System SpecsSystem Spec
2 Weeks Ago   #200
cedar

Windows 7 Pro x64
 
 

Just sent you a pm.


thanks!
My System SpecsSystem Spec
Reply

 Windows won't fully start




Thread Tools




Similar help and support threads
Thread Forum
Black screen with cursor after Windows Logo, takes time to fully start
Recently, when I start my computer, the Asrock splash screen appears, followed by the pulsating windows logo. Once this is done, it moves on to a black screen with only the cursor visible. The cursor is movable but no key commands seem to do anything. Eventually the desktop appears but it can take...
Performance & Maintenance
Fully remove TASKBAR and START MENU
Is it possible to remove taskbar and start menu? If it is - HOW?
Customization
Can't fully edit item in Start Menu
When I pin a shortcut to the Start menu (from the installation directory in Explorer) and try to abbreviate the name, a figure in parentheses "(2)" appears after the name. The message that "There is already a file with the same name in this location." Technically, however, this is not true. For...
Customization
Windows 7 not fully starting
https://www.sevenforums.com/images/smilies/mad.pngThe start up process stops while drivers are loaded. This is the last thing that happens after a series of events: -I tried to reinstall a HP C6180 AIO using the package downloaded from HP, after I had to uninstall the printer -it didn't work...
General Discussion
Windows update working but not fully
Hi, Tried to update windows (windows update) but the status shows some of them were not installed (pending) any idea? http://i33.tinypic.com/70keut.png
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:05.
Twitter Facebook Google+