Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How to change BootManager entry for USB Flash Drive?

20 Nov 2018   #1
pstein

win7pro 64bit
 
 
How to change BootManager entry for USB Flash Drive?

I have a couple of USB Flash Drives which contain different bootable systems.

When I plugin the USB falsh drives into the USB ports of my mainboard, boot my computer and let BootManager show up then they all appears as "Sandisk Cruzer"

So it is difficult to distinguish between them.

Is there a way to change the BootManager entries and rename them e.g. to "mytoolsusb1"
"backupusb2",....

This renaming should be done (if possible) with changes from USB flash drive (not from BootManager).
So that the changed name appear an other computers as well.

How can I achieve this?

Peter


My System SpecsSystem Spec
.
20 Nov 2018   #2
Vineet Garg

Windows 7 Ultimate x32 With Sp1 + Vista Ultimate x32 with Sp1 & Sp2 !!
 
 

Hi pstein,
Greets,
Sir,
You actually want to change info on the flash memory chip and I think its not possible! I would like to mention that there is a utility called ChipGenius based on that information only. The utility reads the information from the chip & help decide about counterfeit & fake flash drives. I fear that the utility would be useless if one can change that information on the chip.

( The ChipGenius Utility : 4 Tools to Test and Detect Fake or Counterfeit USB Flash Drives • Raymond.CC )

Hope it helps,

Thanks & Regards. ...
My System SpecsSystem Spec
Reply

 How to change BootManager entry for USB Flash Drive?




Thread Tools




Similar help and support threads
Thread Forum
Removable Flash Drive Recognized as a Local Disk and not a Flash Drive
I recently purchased a 32 GB San Disk Flash Drive. The security files pre-installed on the drive were junk, and I could not delete them so I formatted the drive to remove them. This cleaned the disk, and it holds data, but I'm not sure if this is part of my problem. I am trying to load my copy of...
Hardware & Devices
win7 boot menu points to missing drive. no entry for active drive.
the working computer won't boot now and i did it. i am to blame. i'm just trying to recover this for a relative to use... yesterday - working configuration with linux on 1 ssd & win7 on hhd using windows boot menu. linux ssd removed and pc booted into win7 via boot menu. today - needed to...
General Discussion
Location of registry entry for Windows backup drive identification
I'm running Win 7 Pro 64bit and am a gamer. I keep all my games on my E: drive (2 TB) so they don't interfere with Windows on my C: drive (500 GB). My backup drive is 1 TB. A while back I was installing a game and noticed that it was also installing MS .NET framework on my E: drive. The next...
Backup and Restore
Cant change flash drive back to quick removal policy!
Hi, Well today i was looking into how i can increase the performance speed of my phone when i was using it as a mass storage device, just like a usb to transfer files to it. I went into: Properties > Hardware > > Properties > Policies And then it showed the removal policies, which were...
Hardware & Devices
Taskbar Button Flash - Change Flash Count
How to Change Count of Flashes for Activated Window on Taskbar This tutorial will show you how to change the number of flashes the taskbar buttons make to notify you when a Window/program (such as when an Antivirus program is finished scanning) is activated in the background in Windows 7 and...
Tutorials


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:12.
Twitter Facebook