Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 Ultimate stalls after LOGO sign. Need to fix it.

11 Apr 2019   #1
Aries 2019

Manitoba 32 Bit Win 7 Ultimate, ASUS A8N-SLI Deluxe
 
 
Win 7 Ultimate stalls after LOGO sign. Need to fix it.

My Win 7 Ultimate does not boot beyond the LOGO sign. It stops at the "Black" screen with the mouse pointer.
OEM-CD repair options does NOT fix it. In fact after running the "Repair" it says ...could not find anything wrong with it. Please advise. Thank you.


My System SpecsSystem Spec
.
11 Apr 2019   #2
wither 2

Windows 7 Pro SP1 64 bit
 
 

I'm sure you'll get additional help but, how long have you waited when it gets to that point?
My System SpecsSystem Spec
11 Apr 2019   #3
Paul Black

Win 7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
 
 

Hi Aries 2019,

Welcome to SevenForums!

Quote   Quote: Originally Posted by Aries 2019 View Post
My Win 7 Ultimate does not boot beyond the LOGO sign. It stops at the "Black" screen with the mouse pointer.
OEM-CD repair options does NOT fix it. In fact after running the "Repair" it says ...could not find anything wrong with it.
[1] Have to clean installed recently?
[2] Are ther any other HDD's attached?
[3] Does it boot into Safe Mode?
[4] Have you fitted any new hardware recently?
My System SpecsSystem Spec
.

12 Apr 2019   #4
wither 2

Windows 7 Pro SP1 64 bit
 
 

See, I knew someone else would help.
My System SpecsSystem Spec
12 Apr 2019   #5
Aries 2019

Manitoba 32 Bit Win 7 Ultimate, ASUS A8N-SLI Deluxe
 
 

Does not boot into Safe mode. Gets stuck half way. It is Win 7 Ultimate
Last known good config does not help.
This is a SATA Seagate 500GB HD.
Yes I have IDE HD connected but NOT powered. When powered the IDE HD boots FINE.
Tried fixing it again with OEM-CD Win7 Home Premium ….repair option cannot find anything wrong. CD boots fine.000000f
Win 7 Ultimate OEM-CD does NOT install all the way....gets stuck I/O error....Code Oxc000000f...file \BOOT\BCD
I don' want to re-install Windows, I want to fix this installation.
Tried Tenorshare-windows-boot-genius and Restoro.exe but these CDs do NOT boot as claimed.
Other repair options like Re-Image, Advance System Repair are USELESS because they DO NOT Boot the computer and have to be installed in a "working+ computer !!
My System SpecsSystem Spec
13 Apr 2019   #6
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Did you try the obvious things like running checkdisk from booted repair cd?
My System SpecsSystem Spec
13 Apr 2019   #7
wither 2

Windows 7 Pro SP1 64 bit
 
 

Does the repair disc you're using have an option that lets you open a command prompt?
My System SpecsSystem Spec
.
13 Apr 2019   #8
Aries 2019

Manitoba 32 Bit Win 7 Ultimate, ASUS A8N-SLI Deluxe
 
 
Win 7 Ultimate stalls after LOGO sign. Need to fix it.

Yes, did CHKDSK atleast x5/6 ...OK, no problem.
Yes, repair disk (OEM) has command prompt. Tried all...bootrec /FIXMBR, FIXBOOT, ScanOs, rebuildBCD….
and nothing fixed the stall.
My System SpecsSystem Spec
13 Apr 2019   #9
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

I would be tempted to delete the bcd store, then run startup repair a couple or three times to let it create a fresh one and populate the entries.

Or delete the bcd store, then use bcdboot command.

You can use this boot media so you can see what you are doing:

17514x86.iso
17514x64-v10.iso
My System SpecsSystem Spec
14 Apr 2019   #10
Aries 2019

Manitoba 32 Bit Win 7 Ultimate, ASUS A8N-SLI Deluxe
 
 

I am a novice. I am learning on my son's OLD computer how to fix an issue.
This computer has Win7 Ultimate on IDE and SATA drives. IDE works 100%. SATA used to work 100% but now stalls after the Logo sign. Disconnecting IDE made no difference. Boots with OEM-Win7 Home Premium CD and a Win7 repair CD 100% but now, booting with OEM-Win7 Ultimate CD loads only half way and I get "I/O error". It used to load 100% but not now.
Whatever is causing a problem with Win7 Ultimate CD is perhaps causing the problem with the SATA drive loading Win7 Ultimate.
Need help to figure this out. Thank you.
My System SpecsSystem Spec
Reply

 Win 7 Ultimate stalls after LOGO sign. Need to fix it.




Thread Tools




Similar help and support threads
Thread Forum
Boot freeze with black screen with lower Windows 7 Ultimate logo
Hi, i`m axl and i`m quite desperate about the actual situation of my only windows installation. i hope that someone here can help understand the problem because i`ve been working hours trying almost every single fix with every single combination i could find on internet. pc specs: notebook hp...
General Discussion
can't type an @ sign in windows 7 ultimate
can't type an @ sign in windows 7 ultimate, when i type an @ all I get is " its not the keyboard I have swapped them out, anyone else seen this? :confused:
General Discussion
Windows7 Ultimate 64 takes 7 mins to get from windows logo to login
Hello, I've been googling and trying suggestions from forums on this problem for a couple of days and no luck..... A couple of weeks ago it appeared that my computer would get a Black Screen of Death after the windows logo. But it turned out that if you wait 7mins (along time to wait with...
BSOD Help and Support
Windows 7 ultimate stalls, "Applying Security Policy"
Just a month ago i bought a new rig, (besides the disks) All have worked fine until just some days ago, was in a game when it freezes and reboots, hmmpfs ok.. Started up again, but since that time the whole system have become unstable, till now when i just boot up all seems fine and just after a...
BSOD Help and Support
Windows 7 Ultimate logo
The image that is at the bottom of the log in screen. Does anyone know where these images are located? I changed the images that were found in C:\windows\branding\basebrd\basebrd.dll and now it shows both of the logos. Its kind of strange. I changed the image that is at the front of the text and...
Customization


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:59.
Twitter Facebook