windows 7 black screen


  1. Posts : 5
    Windows 7 Ultimate x64
       #1

    Probloms With Installing Windows 7


    I tried swapping monitors, swapping keyboard, unplugging everything. And there is black screen. There is also no Windows 7 Startup Animation and The odd part is when I boot up There is sound and there is signal but there
    Is just a black screen. When i boot into safe mode it got stuck on classpnp.sys.

    i wiped that partition restarted and tryed again, this time it said starting windows right before OOBE but it hanged there so i waited for an hour nothing happened, i also heard it might be stuck on agp440.sys? this was with different ISO and am trying again with another ISO. can't use Rufus or any windows program via wine because i use Linux. could use my old laptop to make the ISO though onto the USB. Just want to experience some nostalgia natively thank you.

    with standard ISO without CSM legacy bios mode it gets stuck on the windows 7 logo then crashes. With it on my keyboard and mouse work. also tried UEFI Seven.

    -- CPU is Ryzen 5 3500 6 cores 6 threads
    --GPU is Geforce NVIDIA GTX 1650 Super
    --Memory is Corsair Vengeance DDR4 32 GB ram 2 x 16 3200 Megahertz
    --NVME is 1 TB, PC is an HP previllion gaming desktop TG01
    --motherboard is HP 8643
    --Display is ASUS MG248
    --network is Realtalk RTL8821CE PCie
    Last edited by natedogwoof; 30 Jul 2024 at 12:44.
      My Computer


  2. Posts : 5
    Windows 7 Ultimate x64
    Thread Starter
       #2

    I hope this isn't a violation of rules but bump
      My Computer


  3. Posts : 20
    32
       #3

    if the disk only has 1 os, then its probably a faulty disk or faulty installer, so you could check the iso hash first and then verify the burn also
      My Computer


  4. Posts : 5
    Windows 7 Ultimate x64
    Thread Starter
       #4

    Reply


    Sorry that I'm Late But I'm Doing It With A Different Drive Right Now but My NVME is Faulty But the USB i was using might have been Because its cover was removed, will get back if it works or not hopefully using a USB 2.0 USB will only Impact install Speed and not The success rate.
      My Computer


  5. Posts : 93
    Windows 7 Ultimate 64-bit
       #5

    I thought NVMe disks cannot boot in CSM (Legacy BIOS) mode, only UEFI mode. If you try to install Windows 10/11 on such disk in Legacy BIOS mode, there will be a warning that Setup cannot install Windows there because boot is not supported from that device. Probably Windows 7 Setup doesn't check because the technology wasn't available back then and lets you proceed, but you cannot boot into Windows 7. I know there are some ways to install Windows 7 in UEFI mode, but unfortunately never had to do it, so I cannot help you. There might be a Tutorial about it or Google it.

    Edit: I think I found it: UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with | Tutorials (sevenforums.com)
      My Computer


  6. Posts : 252
    Windows 7 Pro 64-bit
       #6

    NVMe SSD is new technology.
    CSM is old tech.
    They are in different computer time.

    However, CLOVER is a method to let NVMe/PCIe SSD boot in CSM.

    btw, 32 bit Windows 10 on SSD was ok on my Lenovo laptop as well as HP 800 G1 in CSM. (I didn't try 32bit Windows 11 in CSM). that's SATA SSD.

    spapakons said:
    I thought NVMe disks cannot boot in CSM (Legacy BIOS) mode, only UEFI mode.
      My Computer


  7. Posts : 93
    Windows 7 Ultimate 64-bit
       #7

    SATA SSDs can boot in either Legacy mode (MBR) or UEFI (GPT). Windows 10 32-bit or 64-bit can be installed in either mode. You just boot with the appropriate USB flash drive, GPT for UEFI or MBR for Legacy. Rufus allows you to select what to create. Windows 11 officially supports only UEFI boot, but if you bypass compatibility check (you should anyway for an unsupported computer) you can install it in Legacy mode. I am currently typing it from my Legacy Windows 11 installation on my unsupported 3rd generation Intel Core-i7 system. Apart from extra hardware requirements you can bypass, Windows 11 is almost the same as Windows 10 64-bit with a newer skin and some differences is Settings.

    PS: As far as I know most BIOS (UEFI firmwares) support booting from NVMe disks only in UEFI mode, so the OP needs to install Windows 7 in UEFI mode.
      My Computer


  8. Posts : 252
    Windows 7 Pro 64-bit
       #8

    It's an HP computer,

    better obtain HP Windows 7 install media from HP web Cloud Recovery. It will fix issues on drivers of graphics, NVMe SSD, USB3 , , ,
    HP is unique. (general diver seldom simply works when installing HP).


    natedogwoof said:
    --NVME is 1 TB, PC is an HP previllion gaming desktop TG01
    --motherboard is HP 8643
      My Computer


  9. Posts : 93
    Windows 7 Ultimate 64-bit
       #9

    No need, he can use the standard Windows 7 SP1 ISO to create the DVD or USB flash drive and install Windows 7. I suggest to download all laptop drivers from HP in advance so he can install them without requiring internet access.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 07:16.
Find Us