New
#1
New set up still no boot
Hi guys,
As you can see from my system spec I am currently running a old sock A mo/bo and cpu, my win-7 32bit O/S is installed and runs ok (a bit slow but stable)
However, I have just treated myself to some new parts which are, Asus M4A785TD-V EVO Socket AM3 mo/bo, AMD Phenom II X4 955 Black Edition 3.2 GHz Socket AM3 CPU and Kingston 4GB (2x2GB) DDR3 1333MHz HyperX Memory Kit CL7 1.7V Ram. This is the second Asus M4A785TD-V EVO board I have had from Ebuyer as the first one would not boot the screen just stayed black (which is plugged into the on-board D-sub or VGA) However this new replacement board is also doing the same thing.
The board has its power from my old Tagon TG480-U01(480W) psu but it just won’t boot up. As this is the second board they sent me (cpu and ram also changed) I assume something other than the new components are at fault, I have ordered today a new psu a Corsair 650W TX Series, I will report back once it’s been tried but can anyone shed any light in why it won’t boot because I thought the Tagon should be able alright to run it, the Tagon says its ATX ver 2.03 and ATX/ATX12V ver 1.2.
I am using the Tagon psu as I type this back on my old socket A mo/bo (as my spec) when I try it with the ASUS board there is power getting to it as the board led lights up and cpu and system fans are running but no post bleep and black sreen.