Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Delay during "verifying DMI pool data

18 Jan 2010   #1
Mitch656

Windows 7 Professional 64bit
 
 
Delay during "verifying DMI pool data

So i just updated my BIOS to the latest version out there because mine was really out dated.

Now when ever the PC starts up it stays at Verifying DMI pool data for about 10-15sec, whilst with my old BIOS it stayed for about 5-8sec. Also with my new BIOS it doesnt say boot from CD/DVD after it verifying.

Then it stays at starting windows for longer than usual.


Anyway, why does Verifying DMI pool data stay longer on screen now? and not Boot from CD/DVD appear?


My System SpecsSystem Spec
.
18 Jan 2010   #2
PooMan UK

Windows 7 Ultimate 64bit
 
 

Sometimes once you've updated your BIOS, you need to go back into it and set it up again (it might have loaded the default values)
My System SpecsSystem Spec
18 Jan 2010   #3
Mitch656

Windows 7 Professional 64bit
 
 

Lol well i dont know what to set up LOL

my brother did it all

im only 14 :P
My System SpecsSystem Spec
.

18 Jan 2010   #4
seekermeister

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

Sometimes, a delay as you described is cause by hardware detection. When I experienced such a delay, it was due to a defective floppy drive, optical drive or USB device.
My System SpecsSystem Spec
18 Jan 2010   #5
PooMan UK

Windows 7 Ultimate 64bit
 
 

might have been a good idea to check your BIOS settings before you updated it.... but it's not the end of the world ... what's your MB make/model, if I've got some spare time I could post the most common settings that you might need to change, without going into to much detail
My System SpecsSystem Spec
18 Jan 2010   #6
Mitch656

Windows 7 Professional 64bit
 
 

my mother board if that want you wanted is

Gigabyte GA-EP43-DS3
My System SpecsSystem Spec
18 Jan 2010   #7
gregrocker

 

Didn't your BIOS update pretty much solve your previous problem with wake-up freezing and bluescreens?

Enter BIOS setup using the key given on first bootup screen. Look for the listing for your floppy drive in drives listings and change from Auto to Disabled.

Now look for boot order and set CD/DVD drive to boot first, followed by HD. Make sure floppy drive doesn't appear there.

If you have any questions, don't save the settings but post back here to ask to be sure. As long as you don't save settings then you can't mess anything up in BIOS, so be sure that any changes are exactly what you need to do.
My System SpecsSystem Spec
18 Jan 2010   #8
Mitch656

Windows 7 Professional 64bit
 
 

does it really matter, cant i have longer boot up LOL
My System SpecsSystem Spec
18 Jan 2010   #9
seekermeister

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

If it doesn't bother you, it doesn't bother us.
My System SpecsSystem Spec
19 Jan 2010   #10
Mitch656

Windows 7 Professional 64bit
 
 

well it sorta does LOL

i just dont know were to find all the things and i dont wanna stuff PC up since im only 14
My System SpecsSystem Spec
Reply

 Delay during "verifying DMI pool data




Thread Tools




Similar help and support threads
Thread Forum
Cannot boot Windows USB, stuck on "Verifying DMI Pool Data..."
I've created a bootable Windows 7 usb using Rufus. But when I go to boot it (by changing First Boot Device in BIOS to Removable), it just gets stuck at "Verifying DMI Pool Data...". What's wrong? I even checked the usb drive using MobaLiveCD, and it works fine.
Hardware & Devices
Trying to boot with new HD, stuck at "verifying dmi pool data"
This is my first time trying to fix a computer, so please forgive my ignorance. I recently changed the motherboard and hard drive on my hp computer. Before I did that, I was able to create a windows 7 recovery cd (before the old HD died entirely), and I also have a system image on an external...
Hardware & Devices
Boot failure - Hangs at "Verifying DMI pool data"
Hello all, I'm new & having a spot of trouble so I decided to ask for some help here after seeing many other similar issues resolved :) The current situation: I have 1 partition containing my windows 7 install, but it won't even get to the stage where I can select (e.g.) safe mode because it...
Hardware & Devices
Stuck on "verifying dmi data pool"
Hi everyone, i'm new to the pc world, so work with me. I'll do my best to explain and look forward to having someone help me I started my pc this morning and the screen is stuck on "verifying dmi pool data" My OS will not boot Recovery disc found no errors I replaced the battery, and...
BSOD Help and Support
Verifying DMI Pool Data?
I got a new desktop PC. It works fine, but on each startup it gives me the line "Verifying DMI Pool Data". It seems to be part of the normal booting process, but my other PC never does that, and when I researched it on the web I read that it might be a serious error. Now I'm confused. The specs...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:04.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App