Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: new toshiba laptop invlid ip address

03 Feb 2010   #1
kurmudgeon

win 7
 
 
new toshiba laptop invlid ip address

Just got it today, toshiba l455d-s5976, with windows 7

connects to my LAN wifi and also hard wired, but I cannot get beyond invalid IP address.

tried resetting ip6 and ip 4 ...both to get ip automatically

went in as admin and ran netsh winsock reset (etc)
and also netsh int ip reset resetlog.txt


My System SpecsSystem Spec
.
03 Feb 2010   #2
seekermeister

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

This type of problem is over my head, but it might help someone answer your question if you run ipconfig /all in a command prompt and posted a screenshot of the result on the forum.
My System SpecsSystem Spec
03 Feb 2010   #3
kurmudgeon

win 7
 
 

I can't figure out how to get a screenshot of that, or how to get it to this computer that is connected, but here is most of the stuff

net BIOS over.... enabled

tunnel adapter
media disconnected
connection specific DNS suffix
Physical address 00-00-00-00-00-00------
DHCP enabled no
autoconfig enabled yes

tunnel adapter LAN 9
MS 6to4 adapter
Phys addresss 00-00-00-00-00-----
DHCN enabled no
autoconfig yes

tunnel isatap ......

MS ISATP adapter
00-00-00-00-00-00-00-----
DHCP enabled no
autoconfig enabled yes

It is all Greek to me. Is that enough of the info needed to make more sense of this?

Thanks.
My System SpecsSystem Spec
.

03 Feb 2010   #4
brady

 

disable one of them, doesn't really matter which at this point. So for example: disable your wireless connection completely... Uninstall if necessary. Keep your LAN adapter enabled and to automatically grab your dhcp and dns. reboot... then see if you get that error.
My System SpecsSystem Spec
03 Feb 2010   #5
ickymay

win7 ultimate / virtual box
 
 

Quote   Quote: Originally Posted by kurmudgeon View Post
I can't figure out how to get a screenshot of that, or how to get it to this computer that is connected, but here is most of the stuff

net BIOS over.... enabled

tunnel adapter
media disconnected
connection specific DNS suffix
Physical address 00-00-00-00-00-00------
DHCP enabled no
autoconfig enabled yes

tunnel adapter LAN 9
MS 6to4 adapter
Phys addresss 00-00-00-00-00-----
DHCN enabled no
autoconfig yes

tunnel isatap ......

MS ISATP adapter
00-00-00-00-00-00-00-----
DHCP enabled no
autoconfig enabled yes

It is all Greek to me. Is that enough of the info needed to make more sense of this?

Thanks.
not much use tbh

the best way is with an active connection (obviously not properly connected) on the non working pc open a cmd prompt right clicked as admin

type in ipconfig /all (observe the space)
then with the active connection showing all info if pos in the cmd window simply press the windows key and type snip, click the top result of snipping tool then draw a box around the cmd window and save captured window, then move it over to your working pc and upload here

hope that works
My System SpecsSystem Spec
03 Feb 2010   #6
seekermeister

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

Quote:
It is all Greek to me. Is that enough of the info needed to make more sense of this?
I agree with the Greek, but your output looks too short. Here is mine for comparison:

Code:
Windows IP Configuration

   Host Name . . . . . . . . . . . . : Newhope
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : ok.cox.net

Ethernet adapter Local Area Connection 2:

   Connection-specific DNS Suffix  . : ok.cox.net
   Description . . . . . . . . . . . : Marvell Yukon 88E8053 PCI-E Gigabit Ether
net Controller
   Physical Address. . . . . . . . . : 00-15-F2-DB-4D-85
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::e56f:aa68:eade:1180%12(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.172(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Tuesday, February 02, 2010 2:00:40 PM
   Lease Expires . . . . . . . . . . : Thursday, February 04, 2010 2:00:39 PM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 301995506
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-75-3B-89-00-E0-18-99-88-77

   DNS Servers . . . . . . . . . . . : 8.8.8.8
                                       8.8.4.4
   NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.ok.cox.net:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : ok.cox.net
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 12:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e74:f9:7336:9d4d:55e6(Prefer
red)
   Link-local IPv6 Address . . . . . : fe80::f9:7336:9d4d:55e6%14(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled
My System SpecsSystem Spec
03 Feb 2010   #7
kurmudgeon

win 7
 
 

OK, lost my internet connection on this computer too, for a while. This is what I got:

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\windows\system32>ipconfig / all

Error: unrecognized or incomplete command line.

USAGE:
ipconfig [/allcompartments] [/? | /all |
/renew [adapter] | /release [adapter] |
/renew6 [adapter] | /release6 [adapter] |
/flushdns | /displaydns | /registerdns |
/showclassid adapter |
/setclassid adapter [classid] |
/showclassid6 adapter |
/setclassid6 adapter [classid] ]

where
adapter Connection name
(wildcard characters * and ? allowed, see examples)

Options:
/? Display this help message
/all Display full configuration information.
/release Release the IPv4 address for the specified adapter.
/release6 Release the IPv6 address for the specified adapter.
/renew Renew the IPv4 address for the specified adapter.
/renew6 Renew the IPv6 address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns Refreshes all DHCP leases and re-registers DNS names
/displaydns Display the contents of the DNS Resolver Cache.
/showclassid Displays all the dhcp class IDs allowed for adapter.
/setclassid Modifies the dhcp class id.
/showclassid6 Displays all the IPv6 DHCP class IDs allowed for adapter
.
/setclassid6 Modifies the IPv6 DHCP class id.


The default is to display only the IP address, subnet mask and
default gateway for each adapter bound to TCP/IP.

For Release and Renew, if no adapter name is specified, then the IP address
leases for all adapters bound to TCP/IP will be released or renewed.

For Setclassid and Setclassid6, if no ClassId is specified, then the ClassId is
removed.

Examples:
> ipconfig ... Show information
> ipconfig /all ... Show detailed information
> ipconfig /renew ... renew all adapters
> ipconfig /renew EL* ... renew any connection that has its
name starting with EL
> ipconfig /release *Con* ... release all matching connections,
eg. "Local Area Connection 1" or
"Local Area Connection 2"
> ipconfig /allcompartments ... Show information about all
compartments
> ipconfig /allcompartments /all ... Show detailed information about all
compartments

C:\windows\system32>snisni
My System SpecsSystem Spec
03 Feb 2010   #8
PoPPeR

XP Vista 7
 
 

without more of a description from ipconfig /all...may I suggest resetting wireless router?
My System SpecsSystem Spec
03 Feb 2010   #9
brady

 

ok next time put the space only between the ipconfig and the /all. your command should look like this: ipconfig /all
My System SpecsSystem Spec
03 Feb 2010   #10
PoPPeR

XP Vista 7
 
 

no space between / and all

so ipconfig /all
My System SpecsSystem Spec
Reply

 new toshiba laptop invlid ip address




Thread Tools




Similar help and support threads
Thread Forum
Toshiba laptop
Hi Recently I bought the Toshiba Satellite C650D-11R, and I'd like to know what on earth Toshiba has installed on my poor laptop. Here's a logfile generated by CCleaner of my startup programs: Yes HKCU:Run TOSHIBA Online Product Information C:\Program Files (x86)\TOSHIBA\TOSHIBA Online...
Software
Replace Toshiba laptop screen w Sony laptop screen? Same size. 15.6"
Is this at all possible? Pretty new at the whole DIY breaking computers open to fix them stuff but i'm learning quick haha. Here is the toshiba and the screen: Toshiba Satellite C55Dt-A5231 Laptop Laptop LCD Screen for Toshiba Satellite C55DT A5231 15 6" WXGA HD | eBay Here is the...
Hardware & Devices
Toshiba Laptop
I recently was given a Toshiba Laptop. It is approximately 4 yrs old with Windows 7 Pro installed. The OS is totally screwed up. I wanted to restore it to Factory conditions, but it will NOT let me. My question is if I install Windows 7 Ultimate will I need the mother board drivers to get...
Drivers
toshiba nb 250 laptop
can anyone help me please my daughters laptop had windows 7 on it. when it boots nothing loads up think i might have deleted bye accident. dont have back up copy only windows xp the problem i have is this is a notebook and has know cd drive can anyone give me any advice what to do please thx
Installation & Setup
toshiba laptop
Need help easy to follow, I am a novice. C:\Program files\TOSHIBA\TOSHIBA HDD SSD Alert\TosSNotify.exe Keeps popping up what is it, can I fix it?
General Discussion
I have a toshiba laptop
Hey there i have a toshiba laptop its like 4 months old, and has many virus's that it got last night... im hopeing i can "reboot" my windows 7 and go back to how it was when i bought it.... How do i do this?? thanks in advance!
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:52.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App