Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 2.75 gb ram 4gb installed

06 Feb 2010   #1
pjstar

windows 7
 
 
Win 7 2.75 gb ram 4gb installed

Hello

I upgraded to 4 gig ram windows 7 is only showing 2.75 available
It has allocated 15618 mb Hardware reserved ?? 587 mb free ?

Im using a foxconn p9675aa board bios shows over 4gig available so not a mememory issue.

I know 32 bit can handle 4 gig it is supported by microsoft , anyone have any idea whats going on ?
Using nvida 7200gs 128mb

Thanks guys


My System SpecsSystem Spec
.
06 Feb 2010   #2
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

Is there any max memory limits in the bios settings ?
My System SpecsSystem Spec
06 Feb 2010   #3
yowanvista

Windows 10 Pro x64, Arch Linux
 
 

32-bit systems will only be able to use 3.0-3.5GB MAX
The rest will be allocated to your graphics card.
Try to enable memory remap feature if it is listed in your BIOS

or use 64-bit Windows7
My System SpecsSystem Spec
.

06 Feb 2010   #4
Udidwht

Windows 7 Ultimate 64bit SP1
 
 
.

As an example. My system shows a TOTAL of 4GB installed but only 3.50 usable. Once booted at idle it shows approximately 2.65~ GB available system memory (accord to System info).

System HP m7367c

Windows 7 Ultimate 32bit Build 7600

Pentium D 930 3.0GHZ
4GB RAM DDR2 5300 Crucial
Asus P5LP-LE Emery (BIOS 3.19)
Gigabyte HD Radeon 4670 512 DDR3 (CCC-9.10)
Sound Blaster X-Fi Xtreme Gamer
DVD/CD-RW HP 840b
DVD/CD-ROM
Maxtor 300GB SATA-150
Thermaltake 430w PSU
My System SpecsSystem Spec
Reply

 Win 7 2.75 gb ram 4gb installed




Thread Tools




Similar help and support threads
Thread Forum
Win 7 SP1 Installed, Previously Installed Updates Reappear
I recently installed Windows 7 Service Pack 1 for my Windows 7 Home Premium 32-bit edition. As the installation finished the computer restarted and I did not give it another thought. Later on I returned to the Windows Update screen to see if there were any recent updates available for my PC. To my...
Windows Updates & Activation
installed HD 2600 pro card, installed AMS driver, but no ccc software?
I was wondering if this would help? https://www.sevenforums.com/graphic-cards/195195-fix-catalyst-control-center-ccc-will-not-open-install.html I see no evidence that the AMD driver installed at all. Right click desktop does not show ccc, and ccc is not in the lower right panel. Windows...
Graphic Cards
9gb Ram installed. 7 Gb shown as installed, 6.1gb available. Windows 8
Hello, Haven't needed help from you guys in a while. I'm even using windows 8 now. Your advice was so good the last time.. I'm back. Ok so I have a brand new kingston 4gb ram chip installed on my ecs p-45-t black series board. It replaced a 1gb chip. My other chips all say 1.8v this new one...
Performance & Maintenance
List of updates required to be installed before SP1 is installed?
Hello, Is there a list of hotfixes that are required to be installed prior to installing SP1? I am trying to slipstream SP1 into an installation DVD for Windows 7. It works fine, however, after I installed my newly created DVD, I found an update that said "You must install this patch before...
Windows Updates & Activation
How do I get my newly installed Hard Drive (1TB) with Win 7 installed
to boot up. Here's my issue I have a HP Desk top w/ a standard 320 GB hard Drive. I bought a new Hard drive (1 TB Western Digital) so that I could move everything to the new one and use the old one as storage. I had trouble even formatting the new drive but eventually got it and successfully...
Backup and Restore
neo basic 2165 - 4gb installed but only shows 3gb installed
hey guys got an issue her thats been like a stubbed toe - just cant let go of it - im using a dual core neo basic 2165 - i just recently upgraded my ram to 4gb 2x - 2gb -ddr2 800 but it just shows 2.75 usable - and only 3gb installed - ive tried every thing so far- still same result-...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:00.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App