Windows 7 build 7077 bugs

Page 1 of 6 123 ... LastLast

  1. Posts : 48
    windows 7
       #1

    Windows 7 build 7077 bugs


    My first post on here, have been reading plenty though :)

    I installed build 7077 hoping to be rid of the intel graphics adaptor crash when waking up from a blank screen, build 7068 also suffered with this, and now this new build also does it.

    And also my newsleecher no longer runs now, has worked fine on all the other builds.

    I get this error "an internal exception occured"

    Just hope this does'nt become the RC build, as things are breaking that were fine in builds 7000 and 7057.
      My Computer


  2. Posts : 89
    windows 7077
       #2

    Wish I could help but on a AMD setup .Dont think this will be the RC build so can only hope things pan out down the line
      My Computer


  3. Posts : 49
    Windwos 7 Build 7077, Windows Vista build 6001
       #3

    When Installing did you run in compability mode for vista or xp. sp3 or sp1, for the intel grpaics adapter drivers.
      My Computer


  4. Posts : 48
    windows 7
    Thread Starter
       #4

    Hi WindowsSeven

    No just using the built in intel graphics drivers that come with windows 7

    ta
      My Computer


  5. Posts : 49
    Windwos 7 Build 7077, Windows Vista build 6001
       #5

    try using the other drivers that you canfind on intel.com
      My Computer


  6. Posts : 48
    windows 7
    Thread Starter
       #6

    Hi, ok i installed the vista intel drivers for the 945 chipset, but now it becomes very sluggish when i wake up the display, then i have to wait a while to get the taskbar back. I installed them in vista sp1 compatablitiy mode.

    I may go back to build 7057, this all worked perfect.

    Thanks anyway..
      My Computer


  7. Posts : 6,305
    Windows 7 Ultimate x64
       #7

    Strange, i'm using the Intel 945 Chipset & i don't have any issue at all. Wake-up is almost instant
      My Computer


  8. Posts : 358
    windows 7 HP 64bit
       #8

    colinw said:

    And also my newsleecher no longer runs now, has worked fine on all the other builds.
    It sounds like you are using a beta version of NL. If so try 3.9. This works fine.
    Seems like NL changed the security system from 3.95b onwards and this is not compatible with 7077 yet.
    If you aren't using a beta then sorry, i cant help.

    Dave.
      My Computer


  9. Posts : 675
    Windows 7 Enterprise SP1 x64 Windows 8 Enterprise RTM x64
       #9

    Orbital Shark said:
    Strange, i'm using the Intel 945 Chipset & i don't have any issue at all. Wake-up is almost instant
    Me too...
      My Computer


  10. Posts : 48
    windows 7
    Thread Starter
       #10

    Hi fliplip, yeh thats what's strange, i have always been using newsleecher 3.95 beta 3 that is pre-installed on my d: drive complete with all my settings in there as well. And this has worked fine on all windows 7 builds except for 7077. I will use 3.9 final then if that works, thanks.

    As to this graphics adaptor issue i have a screen shot of the error. My laptop does need special graphics drivers because when i change my screen brightness i usually get a graphical bar in the top left hand corner indicating the brightness level, it's an oldish gateway laptop. So obviously in windows 7 this is all garbled up.

    But as i said earlier i only seem to have this error on 7068 and 7077

    I post my error on the next post, i'm at work at the mo and have to get it off my own laptop.

    Thanks anyway..
      My Computer


 
Page 1 of 6 123 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:00.
Find Us