Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Start up message...

29 Apr 2010   #1
Verean

Windows 7 Ultimate x64
 
 
Start up message...

Whenever i turn my computer i get this at start up
Picasa Web Albums - Verean


My System SpecsSystem Spec
.
29 Apr 2010   #2
Jonathan_King

Windows 7 Professional x64
 
 

Try a system restore to get to a point before the troubles, if you can't get into Windows.

If you can get into Windows, check in the startup tab in msconfig. See if you can identify the program, or post a screenshot and we'll take a look.

A Preferred Method of Uploading/Posting Screen Shots
My System SpecsSystem Spec
29 Apr 2010   #3
Verean

Windows 7 Ultimate x64
 
 

Here you go---->


Attached Images
Start up message...-capture.jpg 
My System SpecsSystem Spec
.

29 Apr 2010   #4
Jonathan_King

Windows 7 Professional x64
 
 

I'd say uncheck Rainmeter and Groove Monitor, and see what happens. If it works, enable one of them, and see if you can figure out which program it is.
My System SpecsSystem Spec
29 Apr 2010   #5
Verean

Windows 7 Ultimate x64
 
 

I did as said and restarted twice but still the same.
My System SpecsSystem Spec
29 Apr 2010   #6
Jonathan_King

Windows 7 Professional x64
 
 

Hmm... try a selective startup.

If that doesn't work, try scanning for malware using Malwarebytes.
My System SpecsSystem Spec
29 Apr 2010   #7
Verean

Windows 7 Ultimate x64
 
 

I did malware bytes bu nothing found. Then i disabled all services and startup programs and the message didnt show up but i dont know which service to disable there is so many.
My System SpecsSystem Spec
29 Apr 2010   #8
Jonathan_King

Windows 7 Professional x64
 
 

Disable half of your non-MS services, and see if the error persists. If it doesn't, disable half of the ones you disabled, until you pin it down to the process.

If you want, we can save you some time. Post a screenshot of your Services tab, and I can tell you some that are very unlikely to cause that error.
My System SpecsSystem Spec
29 Apr 2010   #9
Verean

Windows 7 Ultimate x64
 
 

OK this is giving me a problem.
I right clicked on the thumbnail and found out the location.
C:\Windows\SysWOW64\regsvr32.exe
My System SpecsSystem Spec
29 Apr 2010   #10
Jonathan_King

Windows 7 Professional x64
 
 

You may try running a system files check. Open an elevated command prompt and enter sfc /scannow.


If not, a system restore or repair install will almost surely fix it.
My System SpecsSystem Spec
Reply

 Start up message...




Thread Tools




Similar help and support threads
Thread Forum
message on start up
the printer user interface window on left is always showing up on startup how do i delete it
General Discussion
Search Protect message on start up
On start up of Windows7 there suddenly appears a notification concerning important update from a source 'Search Protect' which is asking for installation. Not knowing what this is for I naturally select the decline button. Notification then disappears. I have run several Spyware programs to try to...
System Security
Start up F1 message
When I cut my computer on it prompts me to press F1 to reboot or F2 to set up utilities. I just had Microsoft upgrade my computer to Windows 7 from Vista due to problems with my computer. I have never had this problem before and Microsoft has spent over 30 hours trying to fix the problem with no...
General Discussion
MMC message at start of event viewer
Hi I hope that I have put this in the correct forum ????, never had this before, each time after start up or restart when I open event viewer I get the message "add snap on console" then event viewer opens. Is there a problem or can I do something so that event viewer open without message. ...
Performance & Maintenance
Help with update message at start up
Every time I start up Windows 7 - I get a message alert box with: NO UPDATE HAS BEEN FOUND. Don't know if this is normal or an error. there is no error code. I have turned of updates but still get the message each boot cycle. Additionally, my screen goes blank for a few seconds before I get to...
Windows Updates & Activation
Error Message on Start Up
Hello, Everytime I restat or turn on my computer once Windows 7 loads I get a popup message with this error: There was a problem starting C:\Users\User\AppData\Local\catlocalCMP\catlocalCMP.dll The specified module could not be found Any ideas what the problem is? I assume the file in...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:58.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App