Desktop will not POST, sometimes takes hours

Page 1 of 2 12 LastLast

  1. Posts : 29
    Windows 7 64-bit OEM
       #1

    Desktop will not POST, sometimes takes hours


    The PC is fairly new, got it around Feb. This has happened a few times, about a month or so between each other, usually while I'm afk.

    I come back, screen is black from going into sleep mode I guess, although it seems to be frozen. PC is on but moving the mouse or hitting a key etc does nothing, forcing me to do a kill the power to it via the switch in the back. Holding the power button does nothing.

    And then... it just refuses to POST. The mobo light is on, but nothing happens when I try and boot the PC up. Pushing the power button does absolutely nothing. First time it seemed to finally post up, randomly by itself about 15-30 minutes after I hit the power button. Another time it took about an hour to boot after I hit the power button and left it alone. This time it took many hours. This has happened around 3 times after I got it, starting around 3+ months after I've had it. I've replaced the RAM, and the CMOS battery (I was getting CMOS SETTINGS WRONG, Date/Time not set for awhile)

    Once it finally powers on, the fans kick in, the lights turn on, it boots up just fine. Problem is getting it to start up in the first place.
    PC is on 24/7. I have never overclocked. The room does get hot sometimes, texas heat and summer time, if that matters.
      My Computer


  2. Posts : 8,608
    Windows 7 Ultimate 32bit SP1
       #2

    Have you done a 'repair' install?
      My Computer


  3. Posts : 966
    Windows 7 Enterprise
       #3

    Deathgazer said:
    PC is on 24/7. I have never overclocked. The room does get hot sometimes, texas heat and summer time, if that matters.
    I bet 2 mcDonalds cheeseburgers that this will be the cause.

    You'll need to keep it cooler.
      My Computer


  4. Posts : 4
    Windows XP Home, Professional, Media CenterWindows 7 Home, Professional, Ultimate
       #4

    Do me a favour, When U get a chance to boot up again, Hit "del" button, go to BIOS and tell me d temp of ur CPU!!!!!

    We can go from there mate!!!
      My Computer


  5. Posts : 3,187
    Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
       #5

    After checking the temps, (assuming they look good), see what happens when you try Safe Mode. If things run smoothly then you likely either have a bad driver or startup program which is holding things up.
      My Computer


  6. Posts : 1,252
    Windows 8 Professional 64-bit
       #6

    Maybe hardware damage due to overheating, also the PC running 24/7 in the heat doesn't sound best for a computer.
      My Computer


  7. Posts : 1,326
    Windows 7 Ultimate RTM (Technet)
       #7

    Guys, why are you giving suggestions about Safe Mode and repairing Windows? Get real and read. He said the computer WON'T POST. The last I checked, Windows has nothing to do with whether your system will post or not.

    To the OP...unplug ALL USB devices and try to start from no power. I'll bet you'll start right up.
      My Computer


  8. Posts : 1,252
    Windows 8 Professional 64-bit
       #8

    MacGyvr said:
    Guys, why are you giving suggestions about Safe Mode and repairing Windows? Get real and read. He said the computer WON'T POST. The last I checked, Windows has nothing to do with whether your system will post or not.

    To the OP...unplug ALL USB devices and try to start from no power. I'll bet you'll start right up.
    What does it mean when a computer won't "POST"? I've never heard of that term.
      My Computer


  9. Posts : 4,466
    Windows 10 Education 64 bit
       #9

    POST stands for Power On Self Test. It's a function built into the BIOS on the motherboard. If it fails one of more of the checks you may get an error message , usually a series of beep codes, or in a really bad situation a blank or black screen. All this takes place before the operating system is loaded. Usually when the POST is finished you hear one short beep and then the OS starts to load. That is if you have a speaker connected to your motherboard. If you didn't have a speaker you could easily confuse a failed or stalled OS load with a failed post if you weren't watching too closely. Especially if it's the video card or driver thats throwing a wrench into things.
    If it was me I would take the side of off the case and make sure there is no buildup of dust and clean things up if need be. Then I would power things up and try to get into the BIOS menu to check temps. While you have the side off make sure all the fans are running, especially the one on the CPU and video card.
      My Computer


  10. Posts : 2,963
    Windows 7 Professional SP1 64-bit
       #10

    MacGyvr said:
    Guys, why are you giving suggestions about Safe Mode and repairing Windows? Get real and read. He said the computer WON'T POST. The last I checked, Windows has nothing to do with whether your system will post or not.

    To the OP...unplug ALL USB devices and try to start from no power. I'll bet you'll start right up.
    I was wondering the same thing. I was thinking I missed something.

    The only time I've seen something similar is when my laptop takes about 3 minutes to post as opposed to the 4 seconds it usually takes. A few times now I have cut off my computer without letting windows load up all the way, and when ever I do this it takes awhile longer to POST. It might be that your bios is triple checking everything, but I'm not really sure what causes it. My only other guess is that your motherboard might be messed up. Not really sure how to help besides helping you find some cheap replacement options if you go that route.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:18.
Find Us