Solved Daily BSOD with various stop codes 0x1e, 0x3b, 0x7e

jCni · Jul 24, 2012

Hello.

I finally gave up all hope trying to solve my problem by myself.

Thing is early this year I started getting very random blue screens mostly blaming ntoskrnl, or other windows services. These blue screens didn't seem to have any real pattern and sometimes occurred when playing games either online of offline or just browsing net or being idle.

I've already replaced my motherboard, psu, ram, and gpu in order to solve this problem.
Installed windows from scratch many times plus trying windows 8 with no luck.

Programs I've used to identify cause are memtest86+, Intel BurnIn, Prime95, Furmark, And driver verifier from windows. All these came out without any errors except running driver verifier sometimes freezes my system for some seconds.

Memtest86+ I tried all combinations from both sticks on to just one, and used all mb slots with no errors in 9+ pass.

Intel Burn test and prime 95. I can leave my system run for hours and temps never rise above 52c.

Furmark. Pretty much same deal with this, both my gpu's stay in reasonable temp range and tops at 76c.

Now I noticed my system seems to be much more stable with only 1 ram stick installed. I can watch streams or play without bsod's. It doesn't matter which stick I use or in which slot. All sticks I got are listed in my motherboard site as compatible. So I'm really confused why my system can't handle 2 sticks or more.

I'm really thankful if anyone can help or point me on what to do next.

Forgot system specs -_-

MoBo: 2x asus z68-v lx
CPU: intel 2500k (no oc atm)
GPU: 2x amd 6950 2gb (club 3d coolstream edition)
RAM: 2x4gb kingston hyperx 1600 and 2x4gb kingston 1333
SSD: Corsair force 3 128gb (with latest firmware)
HDD: WD caviar green?
PSU: Silverstone strider plus 1000w and thermaltake xt 675w

HonorGamer · Jul 24, 2012

For now, give this a go:

try these:
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

After:
http://www.sevenforums.com/tutorials/433-disk-check.html

Also try updating Realtek drivers: http://www.realtek.com.tw/downloads...d=5&Level=5&Conn=4&DownTypeID=3&GetDown=false
Post back results.

-Justin

jCni · Jul 24, 2012

Ty for response

Updated network drivers from realtek.
SFC /scan did not find any errors. I ran it 2 times.
I'll leave disk check running and head to work. Will post results when I get home

HonorGamer · Jul 24, 2012

Alright sounds good!

-Justin

smarteyeball · Jul 24, 2012

jCni said:
Forgot system specs -_-

GPU: 2x amd 6950 2gb (club 3d coolstream edition)
RAM: 2x4gb kingston hyperx 1600 and 2x4gb kingston 1333

PSU: Silverstone strider plus 1000w and thermaltake xt 675w

You have two different RAM kits and two different PSU's?

Have you tried one kit by itself? ie Just the 8GB of HyperX's ?

When you swap the RAM modules around, they are set to whatever timings of th module you used last, unless you adjusted the timings in between.

Two mixed set of RAM modules are an automatic red flag. Different mhz, different timings etc. The fact that both kits are individually listed on the QVL does not mean that they will work 'mixed together'.

Start by selecting one kit and ditching the other for now. Eliminate one variable straight off.

And what is with the two differernt PSU's?

The silverstone by itself should be handle the entire load. Unless there is something you are leaving out (like a custom WC loop etc) then there really should be no need to have two PSUs.

How do you have the power distributed? ie What is powering what?

When the system started playing silly buggers (crashing), was this before or after you added extra ram or extra PSU?

karlsnooks · Jul 24, 2012

jCni,
Would you please fill out your system specs which travel with each and everyone of your posts?

Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec (left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Manufacturer and Model and
ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

You will find that in Speccy, you can select info from the display
using your mouse/touchpad and then paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.

jCni · Jul 24, 2012

smarteyeball said:
jCni said:

Forgot system specs -_-

GPU: 2x amd 6950 2gb (club 3d coolstream edition)
RAM: 2x4gb kingston hyperx 1600 and 2x4gb kingston 1333

PSU: Silverstone strider plus 1000w and thermaltake xt 675w

Click to expand...

You have two different RAM kits and two different PSU's?

Have you tried one kit by itself? ie Just the 8GB of HyperX's ?

When you swap the RAM modules around, they are set to whatever timings of th module you used last, unless you adjusted the timings in between.

Two mixed set of RAM modules are an automatic red flag. Different mhz, different timings etc. The fact that both kits are individually listed on the QVL does not mean that they will work 'mixed together'.

Start by selecting one kit and ditching the other for now. Eliminate one variable straight off.

And what is with the two differernt PSU's?

The silverstone by itself should be handle the entire load. Unless there is something you are leaving out (like a custom WC loop etc) then there really should be no need to have two PSUs.

How do you have the power distributed? ie What is powering what?

When the system started playing silly buggers (crashing), was this before or after you added extra ram or extra PSU?

Ok so I've updated my account to include my system specs, and they should be visible now.

I've don disk error check for both ssd and hdd and it didn't find anything special. Error Check was done with ticks on "automatically fix file system..." and "Scan for and attemt to recovery..."

Also ran sfc /scannow 2 more times just to be sure.

I think my first post about my components was written in poor language or something like that. BUT I only have extra PSU and set of 1333mhz ram as a spare. So they are not inside my rig atm. Both parts are only leftovers from previous builds and since they worked then I've kept them for testing purpouses.

- Jani

karlsnooks · Jul 24, 2012

Would like you to run two scripts and post back the results. The first part of the scripts shows what where the results will be.

# **********************INSTRUCTIONS**************************
# STEP 1 ** RUN POWERSHELL AS ADMINISTRATOR ******************
# ************************************************************
#
# WIN key | type POWERSHELL | do NOT hit ENTER |
# in the PROGRAMS list, right-click on WINDOWS POWERSHELL |
# choose "Run as administrator" |
# Click on the YES button (if such appears)
#
# WIN key = key with Microsoft log on top
#
# for the guru:
# WIN | type POWERSHELL | CTRL+SHIFT+ENTER key combo | ALT+Y keycombo
# ************************************************************
# STEP 2 ** COPY AND PASTE ***********************************
# ************************************************************
#
# COPY the script using CTRL+C,
# COPY every line of script down thru both EXIT statements
#
# PASTE into Powershell
#----Right-Click at the PowerShell Prompt
#----(Ctrl+V does not work)
#
# Start copying with first script line without a # at start of the line
# Note: Actually, you can paste the entire file if you rather
#-------Lines starting with a # are ignored by PowerShell
# ************************************************************
# STEP 3 ** SCRIPT OUTPUT & SCRIPT PURPOSE *******************
# ************************************************************
# --The script output and purpose is given at the very front of the script
#
# --The script output and purpose is given at the very front of the script
#
# ************************************************************
# ***************** NOTE - POWERSHELL VERSION*****************
# if you receive this error msg:
#--The system can not find the path specified
# you may need to update your PowerShell
# you must be using Powershell 2.0 or later.
#
# To determine your Powershell version:
#---Run PowerShell
#---enter $host.version
#---you should see at least:
# Major Minor Build Revision
# ----- ----- ----- --------
# 2......0......-1.....-1
#
# If you do not see the above, update your Vista/Win 7.
# ************************************************************
# *************** NOTE - EXECUTION POLICY*********************
# If you haven't set the execution policy, you may need to:
#---Run PowerShell
#---enter SET-EXECUTIONPOLICY -EXECUTIONPOLICY REMOTESIGNED
# ************************************************************

Script #1:

PHP:

# ***********************************************************************
# Puts COMPUTERINFO.TXT on your desktop
# COMPUTERINFO.TXT contains info about your bios and your computer system
# ***********************************************************************

function get-ID { 
  param ([string]$title, [int]$arraycnt, [int]$arrayndx) 
  $id = " " + $title + " "
  If ($arraycnt -ne 1) {$id = $id + [string]$arrayndx + " "}
  $id }
function get-title { param ([string]$id) 
  $hashes = ([int](51 - $id.length)/2)
  $hashstr = '#' * $hashes
  $title = $hashstr + $id + $hashstr
  If ($title.length -le 51) {$title += "#"}
  $title  }
$sterne = "*" * 79
$ossys = @(gwmi win32_operatingsystem)
$ossyscnt = $ossys.count
$ossysid = get-id "WIN" 1 0
$dskvol = @(gwmi win32_volume)
$dskvolcnt = $dskvol.count
$dskarr =@(gwmi win32_diskdrive)
$dskarrcnt = $dskarr.count
$cpu = @(gwmi win32_processor)
$cpucnt = $cpu.count
$mobo = gwmi win32_BaseBoard
$moboid = get-id "MOTHERBOARD" 1 0
$bootcfg = gwmi Win32_BootConfiguration 
$bootid = get-id "BOOT CONFIGURATION" 1 0
$Build = gwmi Win32_WMISetting
$osid = get-id "OS BUILD" 1 0
$CS   = gwmi Win32_ComputerSystem   
$CSprod  = gwmi Win32_ComputerSystemProduct 
$id = get-id "BIOS" 1 0
$csid = get-id "COMPUTER SYSTEM" 1 0
$bios = gwmi win32_bios
$obj = new-object -typename PSobject
$obj | Add-member -membertype noteproperty -name (Get-title $id ) -value $sterne -passthru |
 add-member -membertype noteproperty -name ($id + "Name") -value($bios.name) -passthru |
 add-member -membertype noteproperty -name ($id + "Manufacturer") -value($bios.manufacturer) -passthru|
 add-member -membertype noteproperty -name ($id + "Release Date") -value($bios.converttodatetime($bios.releasedate)) -passthru |
 add-member -membertype noteproperty -name ($id + "Serial Number") -value($bios.SerialNumber) -passthru |
 Add-member -membertype noteproperty -name (Get-title $csid) -value $sterne -passthru |
 add-member -membertype noteproperty -name ($csid + "Manufacturer") -value($cs.manufacturer) -passthru |
 add-member -membertype noteproperty -name ($csid + "Model") -value($cs.model) -passthru |
 add-member -membertype noteproperty -name ($csid + "Primary Owner") -value($cs.primaryownername) -passthru |
 add-member -membertype noteproperty -name ($csid + "Type") -value($cs.systemtype) -passthru |
 add-member -membertype noteproperty -name ($csid + "Total Memory") -value(([string][int]($cs.totalphysicalmemory/1073741824) + " GB")) -passthru |
 add-member -membertype noteproperty -name ($csid + "User Name") -value($cs.username) -passthru |
 add-member -membertype noteproperty -name ($csid + "Product Name") -value($csprod.name) -passthru |
 add-member -membertype noteproperty -name ($csid + "Version") -value($csprod.version) -passthru |
 add-member -membertype noteproperty -name ($csid + "Identifying Number") -value($csprod.identifyingnumber) -passthru |
 add-member -membertype noteproperty -name ($csid + "Vendor") -value($csprod.vendor) -passthru |
 add-member -membertype noteproperty -name ($osID +"Build version") -value($build.BuildVersion) -passthru |
 add-member -membertype noteproperty -name ($bootid + "Boot Directory") -value($bootcfg.bootdirectory) -passthru |
 add-member -membertype noteproperty -name ($bootid + "Last Drive") -value($bootcfg.lastdrive) -passthru |
 add-member -membertype noteproperty -name ($moboID + "Manufacturer") -value($mobo.manufacturer) -passthru |
 add-member -membertype noteproperty -name ($moboid + "Product Type" )     -value($mobo.product) -passthru |
 add-member -membertype noteproperty -name ($moboid + "Serial Number")  -value($mobo.serialnumber)
for ($ndx=1; $ndx -le $ossyscnt; $ndx++) {
  $d = $ossys[$ndx - 1]
  $ossysid = get-id "WIN" $ossyscnt $ndx
 $obj | add-member -membertype noteproperty -name ($ossysid + "Build Number") -value($d.buildnumber) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "OS Version") -value($d.caption) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Country Code") -value($d.countrycode) -passthru |
## add-member -membertype noteproperty -name ($ossysid + "Service Pack") -value($d.csdversion) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Install Date") -value($d.converttodatetime($d.installdate))  -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Computer System Name") -value($d.csname) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Last Bootup") -value($d.converttodatetime($d.lastbootuptime)) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "OS Architecture") -value($d.osarchitecture) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Registered User") -value($d.registereduser) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Product ID") -value($d.serialnumber) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Service Pack Version") -value($d.servicepackmajorversion)
}

for ($ndx=1; $ndx -le $cpucnt; $ndx++) {
  $d = $cpu[$ndx - 1]
  $cpuid = get-id "CPU" $cpucnt $ndx
 $obj | add-member -membertype noteproperty -name ($cpuid + "Current Core Speed") -value([string][int]$d.currentclockspeed + " MHz") -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Current Voltage") -value($d.currentvoltage) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "External Clock") -value($d.extclock) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Max. Clock Speed") -value([string][int]$d.maxclockspeed + " MHz") -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Manufacturer") -value($d.manufacturer)  -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Name") -value($d.name) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Description") -value($d.description) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "version") -value($d.version) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Number of Cores per CPU") -value($d.numberofcores) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Number of Logical Processors") -value($d.numberoflogicalprocessors) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Socket Designation") -value($d.socketdesignation)
}
for($ndx=1; $ndx -le $dskarrcnt; $ndx++) {
  $d = $dskarr[$ndx -1];
  $dskarrid = get-id "DISK" $dskarrcnt $ndx
  $obj | Add-member -membertype noteproperty -name (get-title $dskarrid) -value $sterne -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Model") -value($d.model) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Size") -value([string][int]($d.size/1073741824) + " GB") -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Status") -value($d.status) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Capabilities") -value($d.capabilitydescriptions) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Interface Type") -value($d.interfacetype) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Partitions") -value($d.partitions) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Bytespersector") -value($d.bytespersector) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Sectors per track") -value($d.sectorspertrack) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Firmware revision") -value($d.firmwarerevision) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Device ID") -value($d.deviceid) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "PNP Device ID") -value($d.pnpdeviceid)
}
function Get-DrvType ($n) {
  switch ([int]$n) {
   2  {$result = "Removable"}
   3  {$result = "Partition"}
   5  {$result = "CDROM"}
   default {$result = "Unknown"}
   } 
  $result
}
for ($ndx=1; $ndx -le $dskvolcnt; $ndx++) {
  $d = $dskvol[$ndx-1]
  $dskvolid = get-id "DISK VOLUME" $dskvolcnt $ndx
  $obj | add-member -membertype noteproperty -name (get-title $dskvolid)  -value $sterne -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Caption") -value($d.caption)  -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Drive Letter") -value($d.driveletter) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Label") -value($d.label) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Capacity") -value([string][int]($d.capacity/1073741824) + " GB") -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Free Space") -value([string][int]($d.freespace/1073741824) + " GB") -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Volume Type") -value(get-drvtype($d.drivetype)) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Boot Volume") -value($d.bootvolume) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "System Volume") -value($d.systemvolume) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Compressed") -value($d.compressed) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Serial Number") -value($d.serialnumber) -passthru |
#  add-member -membertype noteproperty -name ($dskvolid + "Device ID") -value($d.deviceid) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "File System") -value($d.filesystem) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Block Size") -value($d.blocksize) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Indexing Enabled") -value($d.indexingenabled) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Auto Mount") -value($d.automount) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Dirty Bit Set") -value($d.dirtybitset)
}
$PhyMemArray = @(gwmi win32_PhysicalMemoryArray)
$cnt = $phymemarray.count
for ($ndx=1; $ndx -le $cnt; $ndx++) {
  $d = $phymemarray[$ndx -1]
  $id = get-id "PHYSICAL MEMORY ARRAY" $cnt $ndx
  $obj | add-member -membertype noteproperty -name ( Get-title $Id ) -value $sterne
  $obj | add-member -membertype noteproperty -name (" Maximum Memory Capacity") -value([string][int]($d.maxcapacity/1048576) + " GB")
  $obj | add-member -membertype noteproperty -name (" Number of Memory Devices") -value($d.memorydevices)
}
$arr = @(gwmi win32_PhysicalMemory)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1]
  $id = get-id "PHYSICAL MEMORY" $cnt $i
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Bank Label") -value($d.banklabel)
  $obj | add-member -membertype noteproperty -name ($id + "Capacity") -value([string][int]($d.capacity/1073741824) + " GB")
  $obj | add-member -membertype noteproperty -name ($id + "Data Width") -value($d.datawidth)
  $obj | add-member -membertype noteproperty -name ($id + "Speed") -value($d.speed)
  $obj | add-member -membertype noteproperty -name ($id + "Description") -value($d.description)
  $obj | add-member -membertype noteproperty -name ($id + "Tag") -value($d.tag)
  $obj | add-member -membertype noteproperty -name ($id + "Device Locator") -value($d.devicelocator)
  $obj | add-member -membertype noteproperty -name ($id + "Manufacturer") -value($d.manufacturer)
  $obj | add-member -membertype noteproperty -name ($id + "Part Number") -value($d.partnumber)
  $obj | add-member -membertype noteproperty -name ($id + "Serial Number") -value($d.serialnumber)
}
$Arr = @(gwmi win32_cachememory)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1];
  $id = get-id "CACHE MEMORY" $cnt $i
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Name") -value($d.name)
  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  $obj | add-member -membertype noteproperty -name ($id + "Purpose") -value($d.purpose)
  $obj | add-member -membertype noteproperty -name ($id + "Block Size") -value($d.blocksize)
  $obj | add-member -membertype noteproperty -name ($id + "Installed Size") -value($d.installedsize)
  $obj | add-member -membertype noteproperty -name ($id + "Max Cache Size") -value($d.maxcachesize)
  $obj | add-member -membertype noteproperty -name ($id + "Number of Blocks") -value($d.numberofblocks)
  $obj | add-member -membertype noteproperty -name ($id + "Status") -value($d.status)
}
$Arr = @(gwmi win32_memoryarray)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1];
  $id = get-id "MEMORY ARRAY" $CNT $I
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Description") -value($d.description)
  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  $obj | add-member -membertype noteproperty -name ($id + "Starting Address") -value($d.startingaddress)
  $obj | add-member -membertype noteproperty -name ($id + "Ending Address") -value($d.endingaddress)
}
$Arr = @(gwmi win32_memorydevice)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1];
  $id = get-id "MEMORY DEVICE" $cnd $i
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Description") -value($d.description)
  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  $obj | add-member -membertype noteproperty -name ($id + "Starting Address") -value($d.startingaddress)
  $obj | add-member -membertype noteproperty -name ($id + "Ending Address") -value($d.endingaddress)
}
$obj  > $env:userprofile\desktop\COMPUTERINFO.TXT

EXIT
EXIT

==============================================
============================================
Script #2.

PHP:

# ***********************************************
# OUTPUT: MemInfo.TXT file on your desktop
# contains info about your memory
# ***********************************************

function get-ID { 
  param ([string]$title, [int]$arraycnt, [int]$arrayndx) 
  $id = " " + $title + " "
  If ($arraycnt -ne 1) {$id = $id + [string]$arrayndx + " "}
  $id }
function get-title { param ([string]$id) 
  $hashes = ([int](51 - $id.length)/2)
  $hashstr = '#' * $hashes
  $title = $hashstr + $id + $hashstr
  If ($title.length -le 51) {$title += "#"}
  $title  }
$sterne = "*" * 79
$obj = New-Object PSObject
$os = gwmi win32_operatingsystem
$id = get-id "OS" 1 0

$PhyMemArray = @(gwmi win32_PhysicalMemoryArray)
$cnt = $phymemarray.count
for ($ndx=1; $ndx -le $cnt; $ndx++) {
  $d = $phymemarray[$ndx -1]
  $id = get-id "PHYSICAL MEMORY ARRAY" $cnt $ndx
  $obj | add-member -membertype noteproperty -name ( Get-title $Id ) -value $sterne
  $obj | add-member -membertype noteproperty -name (" Maximum Memory Capacity") -value([string][int]($d.maxcapacity/1048576) + " GB")
  $obj | add-member -membertype noteproperty -name (" Number of Memory Devices") -value($d.memorydevices)
}

$arr = @(gwmi win32_PhysicalMemory)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1]
  $id = get-id "PHYSICAL MEMORY" $cnt $i
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Bank Label") -value($d.banklabel)
#  $obj | add-member -membertype noteproperty -name ($id + "Tag") -value($d.tag)
  $obj | add-member -membertype noteproperty -name ($id + "Manufacturer") -value($d.manufacturer)
  $obj | add-member -membertype noteproperty -name ($id + "Part Number") -value($d.partnumber)
  $obj | add-member -membertype noteproperty -name ($id + "Serial Number") -value($d.serialnumber)
  $obj | add-member -membertype noteproperty -name ($id + "Capacity") -value([string][int]($d.capacity/1073741824) + " GB")
  $obj | add-member -membertype noteproperty -name ($id + "Device Locator") -value($d.devicelocator)
  $obj | add-member -membertype noteproperty -name ($id + "Data Width") -value($d.datawidth)
  $obj | add-member -membertype noteproperty -name ($id + "Speed") -value($d.speed)
}

$Arr = @(gwmi win32_memoryarray)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1];
  $id = get-id "MEMORY ARRAY" $CNT $I
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  $obj | add-member -membertype noteproperty -name ($id + "Starting Address") -value($d.startingaddress)
  $obj | add-member -membertype noteproperty -name ($id + "Ending Address") -value($d.endingaddress)
}

$Arr = @(gwmi win32_memorydevice)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1];
  $id = get-id "MEMORY DEVICE" $cnd $i
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
#  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  $obj | add-member -membertype noteproperty -name ($id + "Starting Address") -value($d.startingaddress)
  $obj | add-member -membertype noteproperty -name ($id + "Ending Address") -value($d.endingaddress)
}
$obj > $env:userprofile\desktop\MemInfo.txt

EXIT
EXIT

jCni · Jul 24, 2012

karlsnooks said:

Would like you to run two scripts and post back the results. The first part of the scripts shows what where the results will be.

# **********************INSTRUCTIONS**************************
# STEP 1 ** RUN POWERSHELL AS ADMINISTRATOR ******************
# ************************************************************
#
# WIN key | type POWERSHELL | do NOT hit ENTER |
# in the PROGRAMS list, right-click on WINDOWS POWERSHELL |
# choose "Run as administrator" |
# Click on the YES button (if such appears)
#
# WIN key = key with Microsoft log on top
#
# for the guru:
# WIN | type POWERSHELL | CTRL+SHIFT+ENTER key combo | ALT+Y keycombo
# ************************************************************
# STEP 2 ** COPY AND PASTE ***********************************
# ************************************************************
#
# COPY the script using CTRL+C,
# COPY every line of script down thru both EXIT statements
#
# PASTE into Powershell
#----Right-Click at the PowerShell Prompt
#----(Ctrl+V does not work)
#
# Start copying with first script line without a # at start of the line
# Note: Actually, you can paste the entire file if you rather
#-------Lines starting with a # are ignored by PowerShell
# ************************************************************
# STEP 3 ** SCRIPT OUTPUT & SCRIPT PURPOSE *******************
# ************************************************************
# --The script output and purpose is given at the very front of the script
#
# --The script output and purpose is given at the very front of the script
#
# ************************************************************
# ***************** NOTE - POWERSHELL VERSION*****************
# if you receive this error msg:
#--The system can not find the path specified
# you may need to update your PowerShell
# you must be using Powershell 2.0 or later.
#
# To determine your Powershell version:
#---Run PowerShell
#---enter $host.version
#---you should see at least:
# Major Minor Build Revision
# ----- ----- ----- --------
# 2......0......-1.....-1
#
# If you do not see the above, update your Vista/Win 7.
# ************************************************************
# *************** NOTE - EXECUTION POLICY*********************
# If you haven't set the execution policy, you may need to:
#---Run PowerShell
#---enter SET-EXECUTIONPOLICY -EXECUTIONPOLICY REMOTESIGNED
# ************************************************************

Script #1:

PHP:

# ***********************************************************************
# Puts COMPUTERINFO.TXT on your desktop
# COMPUTERINFO.TXT contains info about your bios and your computer system
# ***********************************************************************

function get-ID { 
  param ([string]$title, [int]$arraycnt, [int]$arrayndx) 
  $id = " " + $title + " "
  If ($arraycnt -ne 1) {$id = $id + [string]$arrayndx + " "}
  $id }
function get-title { param ([string]$id) 
  $hashes = ([int](51 - $id.length)/2)
  $hashstr = '#' * $hashes
  $title = $hashstr + $id + $hashstr
  If ($title.length -le 51) {$title += "#"}
  $title  }
$sterne = "*" * 79
$ossys = @(gwmi win32_operatingsystem)
$ossyscnt = $ossys.count
$ossysid = get-id "WIN" 1 0
$dskvol = @(gwmi win32_volume)
$dskvolcnt = $dskvol.count
$dskarr =@(gwmi win32_diskdrive)
$dskarrcnt = $dskarr.count
$cpu = @(gwmi win32_processor)
$cpucnt = $cpu.count
$mobo = gwmi win32_BaseBoard
$moboid = get-id "MOTHERBOARD" 1 0
$bootcfg = gwmi Win32_BootConfiguration 
$bootid = get-id "BOOT CONFIGURATION" 1 0
$Build = gwmi Win32_WMISetting
$osid = get-id "OS BUILD" 1 0
$CS   = gwmi Win32_ComputerSystem   
$CSprod  = gwmi Win32_ComputerSystemProduct 
$id = get-id "BIOS" 1 0
$csid = get-id "COMPUTER SYSTEM" 1 0
$bios = gwmi win32_bios
$obj = new-object -typename PSobject
$obj | Add-member -membertype noteproperty -name (Get-title $id ) -value $sterne -passthru |
 add-member -membertype noteproperty -name ($id + "Name") -value($bios.name) -passthru |
 add-member -membertype noteproperty -name ($id + "Manufacturer") -value($bios.manufacturer) -passthru|
 add-member -membertype noteproperty -name ($id + "Release Date") -value($bios.converttodatetime($bios.releasedate)) -passthru |
 add-member -membertype noteproperty -name ($id + "Serial Number") -value($bios.SerialNumber) -passthru |
 Add-member -membertype noteproperty -name (Get-title $csid) -value $sterne -passthru |
 add-member -membertype noteproperty -name ($csid + "Manufacturer") -value($cs.manufacturer) -passthru |
 add-member -membertype noteproperty -name ($csid + "Model") -value($cs.model) -passthru |
 add-member -membertype noteproperty -name ($csid + "Primary Owner") -value($cs.primaryownername) -passthru |
 add-member -membertype noteproperty -name ($csid + "Type") -value($cs.systemtype) -passthru |
 add-member -membertype noteproperty -name ($csid + "Total Memory") -value(([string][int]($cs.totalphysicalmemory/1073741824) + " GB")) -passthru |
 add-member -membertype noteproperty -name ($csid + "User Name") -value($cs.username) -passthru |
 add-member -membertype noteproperty -name ($csid + "Product Name") -value($csprod.name) -passthru |
 add-member -membertype noteproperty -name ($csid + "Version") -value($csprod.version) -passthru |
 add-member -membertype noteproperty -name ($csid + "Identifying Number") -value($csprod.identifyingnumber) -passthru |
 add-member -membertype noteproperty -name ($csid + "Vendor") -value($csprod.vendor) -passthru |
 add-member -membertype noteproperty -name ($osID +"Build version") -value($build.BuildVersion) -passthru |
 add-member -membertype noteproperty -name ($bootid + "Boot Directory") -value($bootcfg.bootdirectory) -passthru |
 add-member -membertype noteproperty -name ($bootid + "Last Drive") -value($bootcfg.lastdrive) -passthru |
 add-member -membertype noteproperty -name ($moboID + "Manufacturer") -value($mobo.manufacturer) -passthru |
 add-member -membertype noteproperty -name ($moboid + "Product Type" )     -value($mobo.product) -passthru |
 add-member -membertype noteproperty -name ($moboid + "Serial Number")  -value($mobo.serialnumber)
for ($ndx=1; $ndx -le $ossyscnt; $ndx++) {
  $d = $ossys[$ndx - 1]
  $ossysid = get-id "WIN" $ossyscnt $ndx
 $obj | add-member -membertype noteproperty -name ($ossysid + "Build Number") -value($d.buildnumber) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "OS Version") -value($d.caption) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Country Code") -value($d.countrycode) -passthru |
## add-member -membertype noteproperty -name ($ossysid + "Service Pack") -value($d.csdversion) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Install Date") -value($d.converttodatetime($d.installdate))  -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Computer System Name") -value($d.csname) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Last Bootup") -value($d.converttodatetime($d.lastbootuptime)) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "OS Architecture") -value($d.osarchitecture) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Registered User") -value($d.registereduser) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Product ID") -value($d.serialnumber) -passthru |
 add-member -membertype noteproperty -name ($ossysid + "Service Pack Version") -value($d.servicepackmajorversion)
}

for ($ndx=1; $ndx -le $cpucnt; $ndx++) {
  $d = $cpu[$ndx - 1]
  $cpuid = get-id "CPU" $cpucnt $ndx
 $obj | add-member -membertype noteproperty -name ($cpuid + "Current Core Speed") -value([string][int]$d.currentclockspeed + " MHz") -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Current Voltage") -value($d.currentvoltage) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "External Clock") -value($d.extclock) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Max. Clock Speed") -value([string][int]$d.maxclockspeed + " MHz") -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Manufacturer") -value($d.manufacturer)  -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Name") -value($d.name) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Description") -value($d.description) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "version") -value($d.version) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Number of Cores per CPU") -value($d.numberofcores) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Number of Logical Processors") -value($d.numberoflogicalprocessors) -passthru |
 add-member -membertype noteproperty -name ($cpuid + "Socket Designation") -value($d.socketdesignation)
}
for($ndx=1; $ndx -le $dskarrcnt; $ndx++) {
  $d = $dskarr[$ndx -1];
  $dskarrid = get-id "DISK" $dskarrcnt $ndx
  $obj | Add-member -membertype noteproperty -name (get-title $dskarrid) -value $sterne -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Model") -value($d.model) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Size") -value([string][int]($d.size/1073741824) + " GB") -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Status") -value($d.status) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Capabilities") -value($d.capabilitydescriptions) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Interface Type") -value($d.interfacetype) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Partitions") -value($d.partitions) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Bytespersector") -value($d.bytespersector) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Sectors per track") -value($d.sectorspertrack) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Firmware revision") -value($d.firmwarerevision) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "Device ID") -value($d.deviceid) -passthru |
   add-member -membertype noteproperty -name ($dskarrid + "PNP Device ID") -value($d.pnpdeviceid)
}
function Get-DrvType ($n) {
  switch ([int]$n) {
   2  {$result = "Removable"}
   3  {$result = "Partition"}
   5  {$result = "CDROM"}
   default {$result = "Unknown"}
   } 
  $result
}
for ($ndx=1; $ndx -le $dskvolcnt; $ndx++) {
  $d = $dskvol[$ndx-1]
  $dskvolid = get-id "DISK VOLUME" $dskvolcnt $ndx
  $obj | add-member -membertype noteproperty -name (get-title $dskvolid)  -value $sterne -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Caption") -value($d.caption)  -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Drive Letter") -value($d.driveletter) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Label") -value($d.label) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Capacity") -value([string][int]($d.capacity/1073741824) + " GB") -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Free Space") -value([string][int]($d.freespace/1073741824) + " GB") -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Volume Type") -value(get-drvtype($d.drivetype)) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Boot Volume") -value($d.bootvolume) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "System Volume") -value($d.systemvolume) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Compressed") -value($d.compressed) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Serial Number") -value($d.serialnumber) -passthru |
#  add-member -membertype noteproperty -name ($dskvolid + "Device ID") -value($d.deviceid) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "File System") -value($d.filesystem) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Block Size") -value($d.blocksize) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Indexing Enabled") -value($d.indexingenabled) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Auto Mount") -value($d.automount) -passthru |
  add-member -membertype noteproperty -name ($dskvolid + "Dirty Bit Set") -value($d.dirtybitset)
}
$PhyMemArray = @(gwmi win32_PhysicalMemoryArray)
$cnt = $phymemarray.count
for ($ndx=1; $ndx -le $cnt; $ndx++) {
  $d = $phymemarray[$ndx -1]
  $id = get-id "PHYSICAL MEMORY ARRAY" $cnt $ndx
  $obj | add-member -membertype noteproperty -name ( Get-title $Id ) -value $sterne
  $obj | add-member -membertype noteproperty -name (" Maximum Memory Capacity") -value([string][int]($d.maxcapacity/1048576) + " GB")
  $obj | add-member -membertype noteproperty -name (" Number of Memory Devices") -value($d.memorydevices)
}
$arr = @(gwmi win32_PhysicalMemory)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1]
  $id = get-id "PHYSICAL MEMORY" $cnt $i
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Bank Label") -value($d.banklabel)
  $obj | add-member -membertype noteproperty -name ($id + "Capacity") -value([string][int]($d.capacity/1073741824) + " GB")
  $obj | add-member -membertype noteproperty -name ($id + "Data Width") -value($d.datawidth)
  $obj | add-member -membertype noteproperty -name ($id + "Speed") -value($d.speed)
  $obj | add-member -membertype noteproperty -name ($id + "Description") -value($d.description)
  $obj | add-member -membertype noteproperty -name ($id + "Tag") -value($d.tag)
  $obj | add-member -membertype noteproperty -name ($id + "Device Locator") -value($d.devicelocator)
  $obj | add-member -membertype noteproperty -name ($id + "Manufacturer") -value($d.manufacturer)
  $obj | add-member -membertype noteproperty -name ($id + "Part Number") -value($d.partnumber)
  $obj | add-member -membertype noteproperty -name ($id + "Serial Number") -value($d.serialnumber)
}
$Arr = @(gwmi win32_cachememory)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1];
  $id = get-id "CACHE MEMORY" $cnt $i
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Name") -value($d.name)
  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  $obj | add-member -membertype noteproperty -name ($id + "Purpose") -value($d.purpose)
  $obj | add-member -membertype noteproperty -name ($id + "Block Size") -value($d.blocksize)
  $obj | add-member -membertype noteproperty -name ($id + "Installed Size") -value($d.installedsize)
  $obj | add-member -membertype noteproperty -name ($id + "Max Cache Size") -value($d.maxcachesize)
  $obj | add-member -membertype noteproperty -name ($id + "Number of Blocks") -value($d.numberofblocks)
  $obj | add-member -membertype noteproperty -name ($id + "Status") -value($d.status)
}
$Arr = @(gwmi win32_memoryarray)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1];
  $id = get-id "MEMORY ARRAY" $CNT $I
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Description") -value($d.description)
  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  $obj | add-member -membertype noteproperty -name ($id + "Starting Address") -value($d.startingaddress)
  $obj | add-member -membertype noteproperty -name ($id + "Ending Address") -value($d.endingaddress)
}
$Arr = @(gwmi win32_memorydevice)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1];
  $id = get-id "MEMORY DEVICE" $cnd $i
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Description") -value($d.description)
  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  $obj | add-member -membertype noteproperty -name ($id + "Starting Address") -value($d.startingaddress)
  $obj | add-member -membertype noteproperty -name ($id + "Ending Address") -value($d.endingaddress)
}
$obj  > $env:userprofile\desktop\COMPUTERINFO.TXT

EXIT
EXIT

==============================================
============================================
Script #2.

PHP:

# ***********************************************
# OUTPUT: MemInfo.TXT file on your desktop
# contains info about your memory
# ***********************************************

function get-ID { 
  param ([string]$title, [int]$arraycnt, [int]$arrayndx) 
  $id = " " + $title + " "
  If ($arraycnt -ne 1) {$id = $id + [string]$arrayndx + " "}
  $id }
function get-title { param ([string]$id) 
  $hashes = ([int](51 - $id.length)/2)
  $hashstr = '#' * $hashes
  $title = $hashstr + $id + $hashstr
  If ($title.length -le 51) {$title += "#"}
  $title  }
$sterne = "*" * 79
$obj = New-Object PSObject
$os = gwmi win32_operatingsystem
$id = get-id "OS" 1 0

$PhyMemArray = @(gwmi win32_PhysicalMemoryArray)
$cnt = $phymemarray.count
for ($ndx=1; $ndx -le $cnt; $ndx++) {
  $d = $phymemarray[$ndx -1]
  $id = get-id "PHYSICAL MEMORY ARRAY" $cnt $ndx
  $obj | add-member -membertype noteproperty -name ( Get-title $Id ) -value $sterne
  $obj | add-member -membertype noteproperty -name (" Maximum Memory Capacity") -value([string][int]($d.maxcapacity/1048576) + " GB")
  $obj | add-member -membertype noteproperty -name (" Number of Memory Devices") -value($d.memorydevices)
}

$arr = @(gwmi win32_PhysicalMemory)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1]
  $id = get-id "PHYSICAL MEMORY" $cnt $i
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Bank Label") -value($d.banklabel)
#  $obj | add-member -membertype noteproperty -name ($id + "Tag") -value($d.tag)
  $obj | add-member -membertype noteproperty -name ($id + "Manufacturer") -value($d.manufacturer)
  $obj | add-member -membertype noteproperty -name ($id + "Part Number") -value($d.partnumber)
  $obj | add-member -membertype noteproperty -name ($id + "Serial Number") -value($d.serialnumber)
  $obj | add-member -membertype noteproperty -name ($id + "Capacity") -value([string][int]($d.capacity/1073741824) + " GB")
  $obj | add-member -membertype noteproperty -name ($id + "Device Locator") -value($d.devicelocator)
  $obj | add-member -membertype noteproperty -name ($id + "Data Width") -value($d.datawidth)
  $obj | add-member -membertype noteproperty -name ($id + "Speed") -value($d.speed)
}

$Arr = @(gwmi win32_memoryarray)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1];
  $id = get-id "MEMORY ARRAY" $CNT $I
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  $obj | add-member -membertype noteproperty -name ($id + "Starting Address") -value($d.startingaddress)
  $obj | add-member -membertype noteproperty -name ($id + "Ending Address") -value($d.endingaddress)
}

$Arr = @(gwmi win32_memorydevice)
$cnt = $arr.count
for($i=1; $i -le $cnt; $i++){
  $d = $arr[$i-1];
  $id = get-id "MEMORY DEVICE" $cnd $i
  $obj | add-member -membertype noteproperty -name (get-title $id) -value $sterne
#  $obj | add-member -membertype noteproperty -name ($id + "Device ID") -value($d.deviceid)
  $obj | add-member -membertype noteproperty -name ($id + "Starting Address") -value($d.startingaddress)
  $obj | add-member -membertype noteproperty -name ($id + "Ending Address") -value($d.endingaddress)
}
$obj > $env:userprofile\desktop\MemInfo.txt

EXIT
EXIT

Hi

Got one bsod right after I pasted first script and it seems to blame tcpip.
After reboot I ran second script and nothing happened.
Got somewhat distracted by step 3. was I suppose to do something?

EDIT: Oh didn't notice these scripts actually made some text files. So those are now attached.

Dump for this crash is attached.

karlsnooks · Jul 24, 2012

run script #1.
A TXT file is generated.
Do not RAR that txt file.

Attach that txt file to your next post

When finished with that,
then run script #2, attach resulting TXT file to your next post.

jCni · Jul 24, 2012

Files generated can now be found in my previous post also containing dump file

karlsnooks · Jul 24, 2012

jani,
Attach them to your NEXT post please.

jCni · Jul 24, 2012

Ok so txt files generated by running those 2 scripts.

karlsnooks · Jul 24, 2012

your memory is close but not identical to any memory chips listed in the Asus QVL (qualified Vendor List) for your mobo.

Suggest you contact ASUS and see what they say or buy module(s) on their QVL.

Your bios is out-of-date.

go to this website:
ASUSTeK Computer Inc. -Support- Drivers and Download P8Z68-V LX

Download the manual for your mobo.
Download the latest bios.
Follow the instructions in the manual (section 2.1.2) for EZ Flash 2 to update your bios.
After updating the bios,
Update the chipset driver.
Update all other drivers offered thru their site.

I recommend that you first resolve the memory problem.

jCni · Jul 24, 2012

Oh. I was pretty sure I saw my ram listed as compatible...oh well

I flashed bios tho my bios already said it was newest version. Flashing went smoothly but I cant use normal mode in windows anymore. Get bsod as soon as desktop loads up.

Also when logging to safe mode and went to post about this I got another bsod, which I never received earlier in safe mode.

Dumps attached.

karlsnooks · Jul 24, 2012

jani,
replace your ram with a compatible ram.
Which flashing method did you use?
Did you download from the ASUS site?
Install the chipset driver and the rest of the drivers present there.
karl

jCni · Jul 24, 2012

I flashed inside bios like I always do. My bios version just was the same version as stated for newest.
I need to get compatible ram hopefully by tomorrow or the day after that. But I'll keep you posted.
I downloaded all other drivers (except asus ai suite II) from asus site for my mb but all installers require restart which in my case leads to bsod as soon as I'm in windows. Tried to reboot back to safe mode but then it seemed drivers were not installed.

-Jani

karlsnooks · Jul 24, 2012

jani,
sounds like something on your system is dying and dying fast.

Before I suggest some drastic remedies, then I'll await your report after installing compatible ram.
Suggest you print out that QVL for your mobo and take with you when you go to the local electronics store.

don't ever let a salesman convince you that ram that is not on the list will work just fine.

jCni · Jul 25, 2012

Hmmh. Im confused. I printed out the RamQVL file and double checked the content. And it still looks like that my KHX1600c9d3k2/8gx IS listed there. I pulled my sticks from machine and that exact code was printed on them too. I'm not suspecting you telling me they are not compatible and will buy a new set if needed. Just curious.

qvl list downloaded from this side ASUSTeK Computer Inc. -Support- Memory/Device Support (P8Z68-V LX) P8Z68-V LX

Also I tried to turn on my comp this morning with same results but after I took out one ram stick and went bios. Ram settings in bios were set to 1333mhz 1.5v and timings were 9-9-9-24. So I changed them to what they should be. (1600mhz 1,65v with 9-9-9-27) So now my computer can load into normal mode but only with 1 stick installed.

I'm really starting to think this problem has something to do with my cpu memory controller not letting me run more than 1 stick at time.

- Jani

karlsnooks · Jul 25, 2012

jani,
something isn't checking out.
According to the script that you ran you have:
2 X Kingston KHX1600C9D3/4GX

As a further check, please download, install and run SIW (link in my signature)
Once SIW has populated, then:
on the top menu bar, FILE | create report file | HTML | save the file to your desktop
You will need to zip up the file since you can't upload an HTML file to SevenForums.

Just zip it up and attach to your next post.
thanks, karl

Solved Daily BSOD with various stop codes 0x1e, 0x3b, 0x7e

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

knows his stuff

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer

New member

My Computer