HELP driver for geforce 4 mx 440 agp8x

[Mercurial]

my geforce 2 mx400/400 works on 81.85 so try it...

http://www.nvidia.com/object/winxp_2k_81.85.html

 

[cooltouch]

Just thought I'd give this thread a slight bump. I installed the ForceWare 71.90 driver for my GForce MX 440 on my 7100 build, and it went off without a hitch. Whohoo, got my 1680x1050 resolution back!

I don't do games on this machine, but I do quite a bit of image processing and it's nice to have my monitor's best resolution mode back.

Thanks, guys!

Best,
Michael

 

[Firezzy]

how about this??
GeForce Forceware 186.18 WHQL Win 7 | Vista (32-bit) download from Guru3D.com
Is this will work?

 

[akira02]

Nvidia geforce4 mx440 go 64mb driver working ok for win

I've been working in a driver for this old videocard for win7.
I got lucky and now i'll share with you.

Only for 32 bits.

NVIDIA GEFORCE4 MX440 GO 64MB DRIVER WORKING OK FOR WINDOWS 7 HERE

::: BSR Marketing, Tecnologia y Comunicación Digital:::

 

[Antonvn]

Hey guys I just had the same problem for some time! I just installed forceware 72.14 and it works flawlessly for my gf 4mx (pci) on build win7 7600.

Must say that the latest, 93.71 by the site of nvidia, DOESN'T WORK for me!

 

[isherwood]

I have a Geforce4 mx 440 working on Windows 7, using the forceware 71.90 drivers, no problems with it, so maybe the drivers will work on your card, without having to turn down acceleration

Worked for me... AGP GeForce Ti4200. The card doesn't exactly scream, but at least I can get above 60 Hz, which was giving me a serious headache. I did run it in compatibility mode (XP SP3), though I'm not sure that was necessary.

Thanks much.

 

[felferrari]

Does anyone tested the driver posted by akira02?

Tks,

 

[felferrari]

I have an Geforce 4 Mx 440 PCI and it works smoothly w/ 72.14 nvidia driver w/ Win XP SP2 compatibility on setup.

lol... My 8 years old card still worth a while.

 

[rcaf66]

Thanks for the post. I was about to give up testing & revert back to xp. the driver works perfectly.

 

[a5mcclelland]

Thanks for the post. I was about to give up testing & revert back to xp. the driver works perfectly.

glad to hear you've got your card working, which driver version did you use?

 

[SORGAW]

my geforce 2 mx400/400 works on 81.85 so try it...

WinXP/2k 32-bit - (81.85)

Thank you so much! My Geforce4 Ti 4600 finally worked using this driver. Full widescreen with 32 bit color and smooth video!

I've been searching the right driver for more than 3 days until I came to this thread, really appreciate everyone's input!

 

[keiner]

I have a Geforce4 mx 440 working on Windows 7

Im sticking with 81.98 whql drivers, seem to be the best found so far.

Thanks. I chose 81.98 according to your research. Download link.

My card is GeForce MX 440. Installed in Win XP SP3 compatibility mode on 7 Home Premium x86.

Screen resolution top number increased. Desktop activities seems like became faster, also scrolling pages in web browser seems like takes less resources.

Hardware acceleration is active: judge by working with SketchUP 7.



UPDATE:
Too bad, new info. Harware acceleration in Sketchup from time to time produces huge lags, and even sometimes W7 fells into BSoD, caused by NVidiA driver.
When Hardware Acceleration is turned OFF, no such problems.

Will try 70.xx driver or revert back to XP.

 

[Pikkuveli]

Has anyone been able to get MX 440 work on 64-bit W7? I have the PCI version, if that matters.

I've tried several drivers now and I just can't get it installed. Some of the installation setups even say the driver's been installed and the system has to be rebooted, but once in Windows again, device manager says there is no driver installed.

I use my primary display with the motherboards Radeon and would use this GeForce just to get the s-video out.

 

[torrentg]

XP is the latest driver for the MX 440.

Highly recommended to update for Windows 7. If you're using any other later card, that's a 2nd reason why it will not work.

 

[Matchless]

Thanks to all. My old GEforce MX440 V64 is running on Win7 using Forceware 81.98 WHQL 32 bit. Had to install with compatibility mode XP SP2.

Thanks again!

 

[clasiefectivos]

GEFORCE4 MX440 Driver for windows 7 SOLVED!

i know this video card is old but where can i get drivers for this on windows 7?
Windows vista updated it's drivers with the one provided by Microsoft but Windows7 don't have it yet..it's currently using vgapnp.sys and hardware acceleration is disabled..hope to hear from you soon..thanks

HELLO engrjayze !

I have the same problem with the old card Geforce4 MX440 but now it is solved.
Just install the following driver and you are done !!!
ftp://download.nvidia.com/Windows/61.77/61.77_win2kxp_international.exe

another ftp list of mirrors is in:
61.77_win2kxp_international.exe - FTP Mirror Search (Downloads)

I hope it helps.
webmaster clasiefectivos.com

 

[akira02]

Remember!!

Who doesnt have the right drivers yet for the NVIDIA GEFORCE MX440 GO 64 MB FOR WINDOWS 7, here are mine, building by me.

FREE

::: BSR Marketing, Tecnologia y Comunicación Digital:::

Thanks

Ben Spencer

 

[Matchless]

The highest version that will work in Windows 7 is 81.98_forceware_winxp2k_english_whq Download this from nvidia website.
Running my very old GEforce 4 MX440 V64 for the last month on it without problems.

 

[kennyb]

I've tried 85.96 Beta drivers, and got a BSOD.
Im sticking with 81.98 whql drivers, seem to be the best found so far.

thanks for the update..i will try to install 81.98 and post back the results
btw is this the download link for the driver you tested? -->>Forceware 81.98 Win2000|XP download from Guru3D.com

or do you have other download links?

I can confirm 81.98 whql drivers, seem to be the best found so far.

 

[hellboy]

downloading for windows 7 driver from nvidia now downloading driver not yet tested when i test it i will post the comment if its for or not
the link to download is :
download from Guru3D.com