Sound through HDMI

First off specs of the Computer:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01859812&tmp_track_link=ot_faqs/top_issues/en_us/c01859812/loc:5&lc=en&dlc=en&cc=us〈=en&product=4041179
To Sum it up:

Processor: AMD Sempron LE-1300 (S) 2.3 GHz (45W)
Chipset: GeForce 6150SE nForce 430
Motherboard: Pegatron M2N68-LA
Memory: 2GB 240 pin, DDR2 SDRAM
Hard Drive: 250 GB SATA 3G (3.0 Gb/sec) 7200 RPM
Disk Drive: SuperMulti DVD Burner with LightScribe Technology
Video Graphics: nVidia GeForce 9500 GT
Sound/Audio: PPA Int'l 8.1 Channel PCI Sound Card
OS:Microsoft Windows 7 Home Premium (64-bit)


Now my problem is that I am usind a 32" Slyvania brand Flatscreen LCD TV as my Main Monitor, running this through an HDMI cable. The TV itself doesn't have a Mini-Stereo jack type input for sound, so I am trying to get the sound to run through my HDMI port and cable. The Sound Card specifications state that sound is available through the port, and comes with a guide on how to do it. It has a 4-pin to two-pin SPDIF cable that plugs into the Graphics Card, the problem is the SPDIF on my motherboard isn't the 4-pin needed. it is only a 3-pin. After talking to the Customer Support on both the computer and the Graphics card and with GeekSquad, I was told I need to buy a sound card. hence the sound card in my configuration. I am still having problems getting sound to my TV, basically, I have never heard any sound come out of it. ^_^ Any Ideas?

Mellon Head said:

The three pin SPDIF connector, is it a configuration like this?

0 0 X 0

Where the 0 spots are pins, and the X marks an empty pin?

If so, check the wires on your four pin cable. Most of them have one of the four wire slots empty. That means there's no wire in it. If the cable is like that, line the connector up with the pin header on your motherboard so that the empty pin slot lines up with the missing pin, and the wires line up with the pins that are there.

It's easier to make a connector like that with one wire unpopulated for keying, rather than three separate little wires that the end user can plug in wrong.

Let us know if that works.

No, the 2-pin to four-pin Cable that came with the Graphics Card ahs two empty holes, and two with wires. teh 3-pin connector on the Motherboard is like a little white box divided into 3 sections by half-walls between them and a pin in each box.

the 4-pin connector wouldn't work no matter how I tried doing it, unless I opened it up and spliced the wires on myself, which I am afraid to do.

Mellon Head said:

Yeah. I had a quick peek at the motherboard on the HP site, and you're pretty much screwed. HP is using a non standard (read: probably proprietary and hard to get) connector for the SPDIF signal. You're probably going to have to get one direct from an HP dealer, or maybe from ASUS.

Is there any way to use the SPDIF connector on the rear of the chassis? At least that one is standard.

Yeah, nVidia when I was on support with them told me the same thing about the non-standard. Said nVidia was the manufacturer of it also. and I am not seeing the SPDIF on the rear of it? where is it in relation to the SPDIF that is 3-pronged?

Mellon Head said:

Speaking of stereos, you might try getting the audio out of the sound card by a 1/8" to dual RCA cable. They sell them at Radio Shack, and most LCD TVs have an audio input that will accept that type of connector. They're usually on the back and they are red and white, side by side. My TV even has one of it's HDMI connectors paired up to a set of inputs like that, in case the audio isn't available through the HDMI cable.

That is what GeekSquad suggested. I happened to have that specific cable lying around from a boom chair I bought awhile back, and Tried it. didn't work.


gimme 5-10 I'll look for that orange connector and post the results

m'kay I found it, and I tried, BUT my 4-pronged cable won't fit on it because of the small circular half-sized thingy. I know the name of it but I can't think of it right now.

I THINK I may have just found a way to do it, but in order to get to it tehre is a card in my way


is my Integrated 10/100 Base-T networking interface card important? I haven't ever touched it since I bought the computer...

if it isn't would it harm my computer at all if while it was off I removed this card?