Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Screen resolution problem

23 Aug 2010   #11
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Welcome to Seven Forums I found this driver for your LCD on the LG site scanned with MSEW1941.zip
LG Product Support for W1941S-PF# Unzip this file> and try to install using the w1941 setup information file. It's a Vista driver, if unsccessful you may have to go through device manager> monitor> update drive software> browse my computer>and direct it to where the file is located.
Installing the driver for you monitor usually will allow you to use it's native resolution. Fabe




My System SpecsSystem Spec
.
24 Aug 2010   #12
girarae

Windows 7
 
 

I've Downloaded it but I don't know how to install it .Downloaded the manuals but no guides for installing the driver.I've tried doing wut thefabe's said but it says
My System SpecsSystem Spec
24 Aug 2010   #13
Lomai

Win7 HP (x64)/Win7 Ultimate (x64)
 
 

Hi

Could you try redoing what the Fabe suggested under safe mode?

Regards
My System SpecsSystem Spec
.

24 Aug 2010   #14
Lomai

Win7 HP (x64)/Win7 Ultimate (x64)
 
 

Hi

Sorry for the multiple posts.
Could you also post your system specs? Have you updated your motherboard/chipset drivers?

Regards
My System SpecsSystem Spec
24 Aug 2010   #15
Wishmaster

Windows 7 Home Premium 64bit
 
 

Monitor may not show up in device manager until a GPU driver has been installed.

I would try booting in Safe Mode, and run DriverSweeper (Check the ATI Box)

Re-boot and Re-Install the Nvidia Drivers.


From the Device manager, Expand Monitors, and choose Update Driver Software.

Then Choose Browse My Computer, and direct it to the Folder of Driver you just downloaded.


Attached Images
Screen resolution problem-capture.jpg 
My System SpecsSystem Spec
25 Aug 2010   #16
girarae

Windows 7
 
 

I can't Install the monitor during safemode because the monitor doesn't come out on the device manager.Should I uninstall it and reinstall the driver?
My System SpecsSystem Spec
25 Aug 2010   #17
Petey7

Windows 7 Professional SP1 64-bit
 
 

You downloaded the driver, right? You should be able to launch it like you would a normal program, like Word, and run it. The advice to go through device manager was meant to be used if you could not run the installer normally. You probably have about a 5% chance of it not working correctly.
My System SpecsSystem Spec
25 Aug 2010   #18
girarae

Windows 7
 
 

there isn't any installer with it in the zip
My System SpecsSystem Spec
25 Aug 2010   #19
Petey7

Windows 7 Professional SP1 64-bit
 
 

Nevermind then.

Did you try what Wishmaster suggested?
My System SpecsSystem Spec
25 Aug 2010   #20
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Save the Zip file to your desktop>extract files>right click the last one of the 3 files and you should see an option to open or install in the open window>click on it. It's a setup .inf file I just Verified it. Fabe
My System SpecsSystem Spec
Reply

 Screen resolution problem




Thread Tools




Similar help and support threads
Thread Forum
Screen resolution problem?
Okay so i've always ran my pc on 1920x1080 because it's the resolution of my monitor. Today i upgraded my graphic card from (5970 x2 to GTX 780ti), once i turned on my pc and install the latest driver for the gtx 780t it set the resolution to 1920x1080 which is the recommendation setting, only the...
Graphic Cards
Screen Resolution Problem
hello i have the same problem as Nentin. My screen resolution appear to has a problem.The problem happened once ( before 2 days) when i turned on my laptop and after a while ( 10 mins) it was ok,it fixed by it's shelf,but it happened again last night and until now it's still like that, even if i...
Graphic Cards
[PROBLEM] Screen resolution not right!
Hey all, I have recently been running my computer for really long periods and have only just turned it off last night. When I turned it on this morning it did a file corrupt scan which sometimes randomly happens. When windows fully loaded the screen resolution had been changed, almost to...
General Discussion
problem with screen resolution
We have a computer running Windows 7 with a Gateway LP1925 widescreen monitor. But the only screen resolutions available are 4:3. No driver is available at Gateway. Any ideas on how I can force a 16:9 resolution? I think the monitor's max. res. is 1600x900.
Drivers
Screen Resolution problem
Hi, yesterday i intalled Windows 7 x64 and a can't set my screen resolution upper 1024*768 with my nvidia driver. If i don't install the driver and i desable the Microsoft's video cart driver i can go upper 1024*768. My graphics cart is GForce 7800 GT. Any one have a idea ? PS : Sorry...
Graphic Cards
bit of a screen resolution problem
Hello all, I have a bit of a screen resolution problem. It just seems to be a bit sretched, and I only have two options to switch my resoltion to, neither of them helping. My graphis card is a ATI Xpress 1150 256MB HyperMemory (Integrated graphics). I'm not sure how to fix it, I've...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:39.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App