Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Screen resolution problem

25 Aug 2010   #21
girarae

Windows 7
 
 

When I pressed Install it says


My System SpecsSystem Spec
.
25 Aug 2010   #22
Lomai

Win7 HP (x64)/Win7 Ultimate (x64)
 
 

Hi

Could you post your system specs please i.e. Make and model of PC ? - we are aware of the monitor, video card

Regards
My System SpecsSystem Spec
25 Aug 2010   #23
Petey7

Windows 7 Professional SP1 64-bit
 
 

Do you have the NVIDIA control panel in the notification area. As I mentioned before, some people with that resolution have to put it in as a custom resolution (not sure how to actually do this).

EDIT: found a small guide on the NVIDIA website: http://www.nvidia.com/object/custom_resolutions.html

You'll need to figure out the refresh rate for your monitor.
My System SpecsSystem Spec
.

25 Aug 2010   #24
girarae

Windows 7
 
 

OS:Windows 7 Ultimate
Processor: Intel(R) Pentium(R) Dual CPU E2200 @2.20GHz 2.20GHz
Ram: 3.00GB
System Type: 32 bit operating system
My System SpecsSystem Spec
25 Aug 2010   #25
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Quote   Quote: Originally Posted by Petey7 View Post
Do you have the NVIDIA control panel in the notification area. As I mentioned before, some people with that resolution have to put it in as a custom resolution (not sure how to actually do this).
You would go to control panel>Nvidia control panel>change resolution>customize>create custom resolution>enter the horizontal Pixels>vertical Pixels>color depth and refesh rate that your Lcd is rated as> then test.
Have you tried going through the device manager install? Fabe
My System SpecsSystem Spec
25 Aug 2010   #26
Petey7

Windows 7 Professional SP1 64-bit
 
 

Figured out what you need to put in. 1360x768, 60 Hertz, 32-bit color. This should solve the resolution problem, without needing the monitor driver.
My System SpecsSystem Spec
25 Aug 2010   #27
girarae

Windows 7
 
 

@Fabe yes

I don't know why but after going to the control panel>Pressed Customize>checked 'enable resolutions not exposed by display'>pressed 1360x768 at 100hz(32bit)>clicked on 1360x768>apply and it worked
But the problem now is Just Cause 2 because it's still saying out of range
My System SpecsSystem Spec
25 Aug 2010   #28
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

Do you have any other games installed and if so do they work at that resolution? Trying to see if it's game specfic. Fabe
My System SpecsSystem Spec
25 Aug 2010   #29
girarae

Windows 7
 
 

Only Just Cause 2.
Left 4 dead 2 works fine.
My System SpecsSystem Spec
25 Aug 2010   #30
Petey7

Windows 7 Professional SP1 64-bit
 
 

The problem I see now is your monitor is not designed to operate at a 100hz refresh rate. It is designed for a 60hz refresh rate. You can read the specifics for your monitor here: Lg Monitor Ch.lm84k w1941s-Pft
My System SpecsSystem Spec
Reply

 Screen resolution problem




Thread Tools




Similar help and support threads
Thread Forum
Screen resolution problem?
Okay so i've always ran my pc on 1920x1080 because it's the resolution of my monitor. Today i upgraded my graphic card from (5970 x2 to GTX 780ti), once i turned on my pc and install the latest driver for the gtx 780t it set the resolution to 1920x1080 which is the recommendation setting, only the...
Graphic Cards
Screen Resolution Problem
hello i have the same problem as Nentin. My screen resolution appear to has a problem.The problem happened once ( before 2 days) when i turned on my laptop and after a while ( 10 mins) it was ok,it fixed by it's shelf,but it happened again last night and until now it's still like that, even if i...
Graphic Cards
[PROBLEM] Screen resolution not right!
Hey all, I have recently been running my computer for really long periods and have only just turned it off last night. When I turned it on this morning it did a file corrupt scan which sometimes randomly happens. When windows fully loaded the screen resolution had been changed, almost to...
General Discussion
problem with screen resolution
We have a computer running Windows 7 with a Gateway LP1925 widescreen monitor. But the only screen resolutions available are 4:3. No driver is available at Gateway. Any ideas on how I can force a 16:9 resolution? I think the monitor's max. res. is 1600x900.
Drivers
Screen Resolution problem
Hi, yesterday i intalled Windows 7 x64 and a can't set my screen resolution upper 1024*768 with my nvidia driver. If i don't install the driver and i desable the Microsoft's video cart driver i can go upper 1024*768. My graphics cart is GForce 7800 GT. Any one have a idea ? PS : Sorry...
Graphic Cards
bit of a screen resolution problem
Hello all, I have a bit of a screen resolution problem. It just seems to be a bit sretched, and I only have two options to switch my resoltion to, neither of them helping. My graphis card is a ATI Xpress 1150 256MB HyperMemory (Integrated graphics). I'm not sure how to fix it, I've...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:49.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App